ACR brake part needed

[Arizona Vipers]

I've got all the parts for converting my '13 to the ACR carbon brake setup except for one part. The anti-rattle retaining clips that hold the pads in place.
After doing research, these are supposed to be included with each new set of pads, but Brembo has not included them in their pad shipments for months.
Mopar doesn't have any. Does anyone know a generic Brembo part number for these that go on other cars? Somebody told me the ZR1 clip will work on the fronts.


ACR-Brakes-RetainingClip.jpg

[XTREME SUPERCARS]

http://www.autobrakecenter.com/chevr...YEYaAlq68P8HAQ

[Werks]

If you are sure that the hardware is the same as on the ZR1 front caliper then here is a link to the ACdelco parts that we use:

https://www.amazon.com/ACDelco-18K21...T0G6JTA7M3WEFQ

Also just an fyi but with our cars (the vette) none of this hardware is included with replacement brake pads either. So I do not think that it is normal for Brembo to include them.

[mjorgensen]

Factory part numbers although the spring portion is not in the system.

Front Spring Kit: 68283256AA
Front Pin Kit: 68203105AA
Rear Spring Kit: 68283293AA
Rear Pin Kit: 68283294AA

[Arizona Vipers]

Factory part numbers although the spring portion is not in the system.

Front Spring Kit: 68283256AA
Front Pin Kit: 68203105AA
Rear Spring Kit: 68283293AA
Rear Pin Kit: 68283294AA

Thanks Mark! Can I order these from you? I'll call you tomorrow.

[mjorgensen]

Im working on having fca get them released. You can call and we can start that part of it just not sure how fast it will happen.

Thanks Mark! Can I order these from you? I'll call you tomorrow.