ground.JPGpostive.JPG
Sorry for the silly question, but what are the nut sizes and thread pitches at the fuse box (positive lead) and body bolt (ground lead) so that I can fasten the leads for my Deltran Battery Tender? Images attached.
Thank you!
Results 1 to 7 of 7
-
01-01-2017 #1Enthusiast
- Join Date
- Sep 2015
- Location
- SE Michigan
- Posts
- 142
Help with Nut Size and Thread Pitch for Battery Tender
-
01-01-2017 #2Enthusiast
- Join Date
- Oct 2013
- Location
- South of London, Surrey
- Posts
- 7,577
I take it you do not own a small socket set or a set of metric spanners? Im a Gen II guy and looking at those nuts they may be a different size to my car.
If you have an Autozone near you, Im sure they would be helpful?
Happy New YearLast edited by Fatboy 18; 01-01-2017 at 04:24 PM.
-
01-01-2017 #3Enthusiast
- Join Date
- Jan 2014
- Location
- WNC
- Posts
- 1,210
Take the nut off and take it to Home Depot or Lowes and use the nut sizing chart to match the proper sizing.
Originally Posted by Vibert
-
01-01-2017 #4Enthusiast
- Join Date
- Oct 2013
- Location
- Greenwood Village, CO
- Posts
- 3,797
Why aren't you taking the nut off and putting the loop of the connector on the bolt and reattaching the nut?
-
01-01-2017 #5Enthusiast
- Join Date
- Oct 2013
- Posts
- 1,900
^^^^^^^ do what he said
-
01-01-2017 #6Enthusiast
- Join Date
- Oct 2013
- Location
- Brownsburg, IN
- Posts
- 1,786
The fuse box positive post is M6 don't know about the other one in question but there are other M6 studs on the car to choose from.
This is how I routed the harness for my kits:
Wiring Diagram.jpg
-
01-01-2017 #7Enthusiast
- Join Date
- Sep 2015
- Location
- SE Michigan
- Posts
- 142
Thank you everyone! Sometimes I'm not the sharpest tool in the shed. Common sense wins the day.
Reply With Quote
Bookmarks