Need help from a Viper owner with SRT rally stripes

[BJG32]

I decided to take on a project of making my own custom ACRE hood. I have an agency power carbon fiber hood coming. I'm painting it viper white leaving the 2 rally stripes in carbon fiber like this.

FL14DGVP-FT-2.jpg

In addition to this I am adding 2 of JonB's carbon fiber ACR-E vents. Roof and trunk stripes will be gloss black.

Anyways I need an owner of and SRT with strips to make a pattern of one of the outside edge of one of the hood stripes...the scoop area is not important (see pic below for what is needed). The best way to do it would be to put several layers of blue painters tape over the strip in random overlapping order so it peels off in one piece. Don't go outside the line of the stripe with your tape. Only the outside border is important (indicated in red below). Peel the tape off then stick a few pieces of paper to the tape.


...or if anyone is putting on one of rally stripe decal kits from theviperstore.com.... if you could send me the adhesive protection backing portion of the strip I would greatly appreciate it!!!


large_011.jpg

[Dr.Ron]

You're supposed to be figuring out wheel touch up paint Ben!! LOL

I like the fang stripes on white. it's going to look great!

Good luck!

Ron

[KB Viper]

it's going to look good, I can't wait to get my new hood painted.

[BJG32]

Thanks guys!

Bump for help!

[nuviper]

Willing to see your result. How do you plan to cut the hood vents?

[BJG32]

Dremel the vents. Round over the edges, then paint the hood.

I have friend loaning his acre for measuring/patterns etc.