Halo racing seat in a Gen V ACR

[BTR Racing]

Looking for any feedback from anyone that has or has seen a true halo racing seat in a Gen V. If you have one or have seen one, can you tell me what brand or specific seat it was? I am looking to put a true racing seat in my 16 ACR but would love some guidance as I hear its a pretty big task to find one that fits. I have spoke with Racetech and they claim to have a seat that fits. I used their seats in my sprint car and they are a very nice seat but looking at the dimensions not sure it will actually fit with the door panel on.

[steve911]

It depends upon whether not you want to take off your door panel to gain clearance for the seat.

[BTR Racing]

I will be using the car for both street and track so I prefer to keep the door panel in tact if at all possible

[ek1]

Read these first:

http://driveviper.com/forums/threads...ight=halo+seat
http://driveviper.com/forums/threads...at-and-harness
http://driveviper.com/forums/threads...halo-for-gen-v

[Steakfeast]

TKO makes a specific Gen V Viper seat with HR that fits supposedly.

[TKO MOTORSPORTS TEAM]

TKO makes a specific Gen V Viper seat with HR that fits supposedly.

Our seats fit without any modifications to your factory interior. Seats are also a complete kit you get everything you need to install no hunting around for parts or bolting in some generic bracket; All our seats kits are model specific. Seats also fit larger and taller drivers easily.
TKOSROD1285K 3492.00

5TH GEN VIPER RACING SEAT WITH DRIVER HEAD CONTAINMENT
Our aluminum racing seats are built specifically to fit the Dodge Viper. These seats offer maximum driver protection and comfort while also lowering the driver seated position by 3 inches. Our racing seats are known for being extremely comfortable while still appealing to the serious track day Viper drivers. FITS FACTORY INTERIOR.
• Seats will accept 5-, 6-, or 7-point racing belts
• Padded driver head containment
• 3-inch lower seating position allows for better helmet clearance and performance
• 20 lbs. lighter than factory seat
• Adjustable mounting front, back, up, down and tilt back
• Our seats do not interfere with getting in and out of your Viper
. Compatible with all EIS foam kits
Kit comes complete with:
• Billet aluminum seat base mount
• 6-point impact racing camlock 3-inch lap belt, 3-inch to 2-inch shoulder belt.
• Lap belt mounting bracket (accepts 5-,6- or 7-point racing belts)
• Aluminum racing seat with head containment
• Billet aluminum seat spacers for adjusting driver position
• All necessary hardware for installation
Optional custom fit seat foam kit available also for additional cost
KIMG0949.jpg2018-05-31 08.42.44.jpgKIMG0952.jpgKIMG0953.jpg