After market wheels

[Tamvette]

[QUOTE=NT-ACR;249278]

Yes, they do fit. Guys like the 18'' rim because it allows them to use a wider variety of track oriented tires from semi slicks like Hoosiers to full slicks like the ones from Michelin and Pirelli.

The reason they've gone with a larger front tire is to reduce the understeer that some have experienced. Also, while it does take some adjustment, the guys seem to not be having issues with clearance once the cars are properly set up.

Do you mean more negative cambet to avoid rubbing or ride height change?

[EliteV]

awesome thread folks, thanks!

[aspman]

Yeah....keep it up!

[ssjcreeper]

Straase makes a similar design which is a much better wheel company than Iforged (so I'm told by a guy who I trust that's been in the wheel game for a while now)...

Thanks! I'll check them out. Now I just need to sell my ADV1 6DC wheels...

IMG_1376.jpg

[hova00]

I had a set of Strasse Forged wheels on an M3 and they were not hub centric like they were supposed to be. My steering wheel had a vibration no matter what I did so checked and sure enough the wheels were out of spec.

[BJG32]

.

Anyone know the suspension specs on this car?

[98intrigue]

Thanks! I'll check them out. Now I just need to sell my ADV1 6DC wheels...

IMG_1376.jpg

Don't do that! Those wheels look killer on your car.

[NT-ACR]

Anyone know the suspension specs on this car?

The owner is a client of this company:

http://wheelsperformancecom.stores.yahoo.net

You might try contacting them.

[BJG32]

The owner is a client of this company:

http://wheelsperformancecom.stores.yahoo.net

You might try contacting them.

Thanks!

[bluesrt]

The Finspeed setup I posted earlier has 18X12 and 18X13 rims running 335/30/18 and 345/35/18 Hoosier A7s. Is there a particular reason you want a 19'' rear?

just like the set up better

[RickyBobby]

Anyone know the suspension specs on this car?

I'm the owner of this ride. Viper Exchange Active Suspension and TA Sway Bars F/R. Ride height set approximately 1.5" lower F/R than stock height and using Ben Keating "tune" on the dampers. Ride is actually smoother than stock and on the track tons of grip. Wheels are American Force Muscle/360 Forged SL10 Concave Series 20 in. F/R, fronts wrapped in Nitto NT05 285/25/20 and rears wrapped in Nitto NTO5 345/25/20. Finish on the wheels was Matte Grey but had them powdercoated Black Lips and blue/grey spokes.

[ssjcreeper]

Thanks Ryan. I keep going back and forth on selling them for something new. Can't make up my mind. I need more Vipers so I can have all the wheels!

Don't do that! Those wheels look killer on your car.

[BJG32]

I'm the owner of this ride. Viper Exchange Active Suspension and TA Sway Bars F/R. Ride height set approximately 1.5" lower F/R than stock height and using Ben Keating "tune" on the dampers. Ride is actually smoother than stock and on the track tons of grip. Wheels are American Force Muscle/360 Forged SL10 Concave Series 20 in. F/R, fronts wrapped in Nitto NT05 285/25/20 and rears wrapped in Nitto NTO5 345/25/20. Finish on the wheels was Matte Grey but had them powdercoated Black Lips and blue/grey spokes.

Thanks....Looks great!

[DanH]

Thanks Ryan. I keep going back and forth on selling them for something new. Can't make up my mind. I need more Vipers so I can have all the wheels!

Do that! Because I'm interested if you're selling

[outnumbered]

Strasse SM5 Deep Concave: 19x11 front 19x13 rear

[Heysie]

Bump.


Keep some more nice wheels pics coming. I need wheels soon, so I can decide.

[98intrigue]

Last few sets of Forgelines purchased from Tony Whatley.

Forgeline Rebel
Forgeline AL300

[Scott_in_fl]

Go look at BC Forged. They had a couple great 6 lug options recently. EH308 would be sick.

[outnumbered]

BC Forged KL13 from Nineball - Tony

[Cpl]

BC Forged HCA 217 w/ hidden titanium hardware

20191126_152654.jpg

---

[Scott_in_fl]

^^^ That looks awesome. Yeah, they have some good stuff for our cars because they've designed their wheels to have a center bolt area that looks to be machinable for either 5 or 6 lug applications. So, my hunch is that most of their wheel line can be machined with 6 lugs for our cars.

Really digging this though (EH 308):
BC Forged EH308.jpg

[sadil]

BC Forged KL13 from Nineball - Tony

More photos!!!!

[outnumbered]

More photos!!!!

Here you go....

[Tay]

Finspeed Spyder 18x11 front/ 19x13 rear. *Please ignore the backwards American flag. It has since been corrected

[sharmut]

Finspeed Spyder 18x11 front/ 19x13 rear. *Please ignore the backwards American flag. It has since been corrected

How is the front inside barrel holding up along the caliper plane? In addition what offset is the front wheels?