Results 1 to 12 of 12

Hybrid View

  1. #1

    2016 acr -e hard to shift when hot

    got a 2016 acr e that shifts like butter cold, when warmed up on the track 3rd and forth gets notchy, have changed fluid and bled through the new process(self bleed) any body have this too?

  2. #2
    Did you put the standard ATF+4 Dodge stuff back in, or a better oil? I put Amsoil Multi vehicle full synthetic ATF and my tranny shifts like butter in all gears. Much improved shifting over the stock oil.

  3. #3
    Enthusiast
    Join Date
    Nov 2013
    Location
    Chandler, AZ
    Posts
    2,463
    Quote Originally Posted by Dave1968 View Post
    I put Amsoil Multi vehicle full synthetic ATF and my tranny shifts like butter in all gears.
    I've never heard of putting butter in a transmission before !

  4. #4
    Enthusiast
    Join Date
    Nov 2014
    Location
    Bay Area, CA
    Posts
    1,053
    my 2016 ACR-E transmission is noticeably notchier than my 2014 TA. Almost feels like it's going to grind before going in on some shifts.

  5. #5
    Yes i changed it to motul

  6. #6
    Quote Originally Posted by bluesrt View Post
    Yes i changed it to motul
    You just voided your warranty.

  7. #7
    Aahhh pooey

  8. #8
    Enthusiast
    Join Date
    Oct 2013
    Location
    Ohio
    Posts
    3,889
    Keep in mind, your trans probably has carbon based parts in the sychro's. Some oils (even popular products) can cause the carbon rings to swell, subsequently, hard notchy shifts
    Last edited by Jack B; 08-21-2016 at 12:56 PM.

  9. #9
    Enthusiast
    Join Date
    Oct 2013
    Location
    CT
    Posts
    2,733
    My 3rd and 4th gets notchy when hot as well, still on factory fill. Not a big problem for me but it's noticeable. Although 2nd gear whines on decel not loud to the point of concern but it's there.

  10. #10
    Enthusiast
    Join Date
    Oct 2013
    Location
    Greenwood Village, CO
    Posts
    3,797
    My Gen 5s shift fine, hot or cold. However, I did once have this problem on my 09 ACR. Ended up the trans needed a rebuild with new synchros and some other parts I don't remember.

  11. #11
    Enthusiast
    Join Date
    Apr 2015
    Location
    Detroit, MI
    Posts
    1,183
    Tried some Amsoil trans fluid last weekend at the track. Shifting seemed to be solid other than my own mistakes and getting accustomed to how much torque this thing puts down. Its just hard to put power down on some tight turns and get into the next gear. One hand on the wheel turning left while car going right due to centrifugal forces and engine torque clockwise lol. A lot going on.

    Since then, I have a feeling like 1st and 2nd are a little notchy and less buttery compared to before, especially when cold. I dont know if this is just in my head or if I hurt something. Any ideas? What is the best oil for this trans? I have also reached out to Donato for some help.

  12. #12
    Tech Team

    Join Date
    Mar 2015
    Location
    Detriot
    Posts
    50
    Does the increased notchy feeling on up or down shifts into 3rd / 4th ?
    How long running on the track before it starts to get noticeable ?

    Could be the bronze blocker rings are worn.


 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •