Lowering Spring Caps - 2013 GTS - Pics

[thethom]

Viper Small.jpg

Top is before, bottom is after.

Finally bought the lowering spring caps after lurking for a while. Ride is exactly the same (can't live with losing the dual mode ability), the drop is very subtle but there is a definite difference in the wheel gap/shape of wheel gap. The alignment was the worst part, took the dealer an entire day. I don't scrape on anything. Very happy with results. Happy to answer any questions.

[wiech101]

Looks way better. I am thinking about getting a set as well, for my GTS. Did you install them? I also see you added the VIPER name above the GTS logo. The car should have came like that from factory.

Derek

[KB Viper]

Viper Small.jpg

Top is before, bottom is after.

Finally bought the lowering spring caps after lurking for a while. Ride is exactly the same (can't live with losing the dual mode ability), the drop is very subtle but there is a definite difference in the wheel gap/shape of wheel gap. The alignment was the worst part, took the dealer an entire day. I don't scrape on anything. Very happy with results. Happy to answer any questions.

looks good, did you do the TA alignment?

[thethom]

Hey,

Yes I added the Viper logo, it was the "Viper GT" logo available online, I just cut out the GT. Forgot about that mod lol.

No I just got the GTS alignment. The dealer did it, they also performed the installation without removing any of the shocks. They did however have to run to Autozone to get the right size spring compressor.

[ViperDC]

big improvement

[nx91notch]

I like it. Just enough to make a difference but not so low that you have to worry when driving.

[Dsjp916]

Looks great. I also like the viper emblem above the gts and may steal that idea lol. Prob do the caps in the winter.

[Dr.Ron]

Looks great. I also like the viper emblem above the gts and may steal that idea lol. Prob do the caps in the winter.

I also got the "Viper" badges, but I got JUST "Viper". I felt that just "GTS" looked weird on the fenders and it didn't say Viper on the car anywhere.
I think for 15' they added that badge. It looks better in my opinion.

Ron

[SilveRT8]

No Viper logo but I got the VE lowering caps also.
Before............................................ ..........................................After

[thethom]

It's both a blessing and a curse, not having "Viper" anywhere spurs on conversation when people ask what it is, but then again, noone knows what it is without a "Viper" logo haha.

...and worse, I have had people say "nice corvette..." 😧😧😧

[Vipes]

That looks great!! What kind of epoxy is that on the floor?

[Arizona Vipers]

Looks way better. I am thinking about getting a set as well, for my GTS.

Derek

I'm selling a set of the lowering caps. Only put about 500 miles on them before going to MCS shocks. PM me a decent offer and they are yours!

[Arizona Vipers]

Viper Small.jpg

Is the Viper log you installed on the side the logo that goes on the valve covers?

[7TH_SIGN]

Is the Viper log you installed on the side the logo that goes on the valve covers?

The 2015s+ have those emblems on the side from factory.

[Dr.Ron]

Is the Viper log you installed on the side the logo that goes on the valve covers?

I got mine here:https://theviperstore.com/Viper5_Pro...ce_Emblems.htm

Scroll down to this one:JU-5ZB95SZ0AA

They just stick on.

Ron

[Mark1107]

I added it to my old srt base and loved the look.

[Mark1107]

image.jpgimage.jpgimage.jpgimage.jpg

Better pics

[The_Ruski_Driver]

EDIT: no longer relevant

[Arizona Vipers]

How bad do you rub now? With lowering caps I'm rubbing every 5 miles on average and on every hard turn on the street. I can't imagine this car will hold together on the track

Hey you should delete this post or edit it as you found out the rubbing problem was due to the spacers on your car

[Arizona Vipers]

I got mine here:https://theviperstore.com/Viper5_Pro...ce_Emblems.htm

Scroll down to this one:JU-5ZB95SZ0AA

They just stick on.

Ron

Thanks!

[thethom]

Is the Viper log you installed on the side the logo that goes on the valve covers?

Yes I have the same one as Dr. Ron. Easy to apply, not the same as the one that goes on the valve covers.

Also, ZERO rubbing, unless you are talking about on the ground lol. The little plastic piece in front of the front wheels has rubbed a couple times on high approach angles when I haven't been paying attention, but never the fascia on the ground. I see that you had spacers, that may cause a problem.

Lastly, no idea about the epoxy, it was on the garage floor when I bought the house :-P.

[ViperPete]

Looks great! I'm too paranoid to lower my car.