Is anyone aware if this style of facia chin guard is still available anywhere? I purchased this one a few years back from a fellow Viper owner who couldn't remember what vendor he got it from. It simply slides over the over the edge of the facia and is held in place by some adhesive that is embedded in the guard. This one has served me well but its worn out and I'm in need of another. Any help in locating another is appreciated.
Results 1 to 14 of 14
Thread: Facia Guard
-
03-25-2016 #1Enthusiast
- Join Date
- Oct 2013
- Posts
- 15
Facia Guard
-
03-26-2016 #2Enthusiast
- Join Date
- Oct 2014
- Location
- Driving around with contaminated fluids braking at 95% while squirting WD40 in people's locks
- Posts
- 3,036
Snake Oyl Parts Rack McMaster Carr
-
03-26-2016 #3Enthusiast
- Join Date
- Oct 2013
- Posts
- 15
I searched the first two vendors before I posted here. I saw nothing but the bolt on aluminum guard. McMaster Carr may have it but I have no idea what it would be called. Its nothing more than a piece of protective edging with adhesive in it. I'll do some more digging on McMaster Carr and see if I can come up with something.
-
03-27-2016 #4Enthusiast
- Join Date
- Oct 2013
- Location
- SE PA
- Posts
- 357
I used to sell those. I still either have or can get the material...just say the word...
I put a new one on the GTS at Fall clean-up time.Last edited by Matt M, Pa; 03-27-2016 at 08:28 AM.
-
03-27-2016 #5Enthusiast
- Join Date
- Oct 2014
- Location
- Driving around with contaminated fluids braking at 95% while squirting WD40 in people's locks
- Posts
- 3,036
The secret codeword for mcmaster carr would be, wait for it... plastic edging
-
03-27-2016 #6Enthusiast
- Join Date
- Oct 2013
- Location
- SE PA
- Posts
- 357
..at least the stuff I sold/sell....I never saw at McMaster-Carr.
-
03-27-2016 #7Enthusiast
- Join Date
- Oct 2014
- Location
- Driving around with contaminated fluids braking at 95% while squirting WD40 in people's locks
- Posts
- 3,036
They may not have that exact product. Or didn't then. Their selection is constantly changing. Worth a look tho.
-
03-27-2016 #8Enthusiast
- Join Date
- Oct 2013
- Posts
- 15
PM sent Matt.
-
08-06-2016 #9Enthusiast
- Join Date
- Oct 2013
- Posts
- 15
Hey Matt M, I'd like to buy some more of the facia guard material if you have any left. Give me a PM to work out payment. Thanks!
-
08-12-2016 #10Enthusiast
- Join Date
- Oct 2013
- Posts
- 15
If anyone is selling this stuff, or has a source for an entire roll, I'm interested in buying some. Thanks!
-
08-12-2016 #11Enthusiast
- Join Date
- Nov 2014
- Location
- SF Bay Area
- Posts
- 25
Pretty sure it is just door edge trim. I bought a whole roll of it at AutoZone. Cut to fit and has a nice glue strip inside to secure it to the fascia afterwards.
-
08-12-2016 #12Enthusiast
- Join Date
- Oct 2014
- Location
- Driving around with contaminated fluids braking at 95% while squirting WD40 in people's locks
- Posts
- 3,036
McMaster Carr. Boom. Done.
-
08-13-2016 #13Enthusiast
- Join Date
- Oct 2013
- Location
- SE PA
- Posts
- 357
Sorry Cottonmouth...haven;t been on. Answered your PM....
-
08-13-2016 #14Enthusiast
- Join Date
- Oct 2013
- Location
- Tucson, Arizona
- Posts
- 4,776
McMaster Carr is just cool to look through. I remember flipping through the catalog when I was younger. Pretty much if you can imagine a fastener, they have it. Stainless 3/4" lag bolts? Yeah they got em.
Reply With Quote
Bookmarks