ARD Motorsports New Product Release: TA 2.0 Boomerang Guards!

[ARD Motorsports]

These protectors are an exact replacement for your TA 2.0 equipped Viper. They're also a direct bolt on for the TA 1.0 or Carbon Aero Package equipped Gen V Vipers giving the front end a more aggressive look. These guards tend to get roughed up pretty easily on speed bumps, curbs/other road hazards and when we called the dealer about replacing one of ours that had a pretty bad gash in it they were very eager to sell us the entire carbon/plastic assembly for over $1,100 per side, but would not sell us just the plastic guard. After that phone call we began manufacturing our own replacements for the Viper community.

Price: (per pair)
$159.95 without Safety Torx
$164.95 with Safety Torx

Install is very easy - seven T25 safety torx screws (if you don't have a bit we can supply one for $5) and takes about 10 min.

You can order them on our website here:
http://ardmotorsports.com/product/ar...ta-2-0-guards/

[SinasViperTA]

Awesome! Got any more pics of them mounted on the car from a further distance? Would be much appreciated. Thanks!

[ARD Motorsports]

Awesome! Got any more pics of them mounted on the car from a further distance? Would be much appreciated. Thanks!

I'll see if I can get a customer to post up when they install them, our car is still in development mode

[Voice of Reason]

That's an expensive extra 1.5" of plastic over the 1.0s...

[ARD Motorsports]

That's an expensive extra 1.5" of plastic over the 1.0s...

More than double the material per piece, we buy the material by the sheet and get half the quantity vs the 1.0's

[ViperSmith]

That's an expensive extra 1.5" of plastic over the 1.0s...

Still quite a bit cheaper than MOPAR lol

[sharmut]

I would love to see a TA2.0 version that's longer, closer to the ACR-E, but this will do for now.

[ARD Motorsports]

I would love to see a TA2.0 version that's longer, closer to the ACR-E, but this will do for now.

We are working on some ARD unique designs that we will have available later in the year ;-)

[FLATOUT]

Well done! I know where to go if we need a set here at VE.

Andy

[ARD Motorsports]

Well done! I know where to go if we need a set here at VE.

Andy

Thanks!
We've got both versions on the shelf, and ACR-E is in progress

[ACR Steve]

Looks very cool........ people forget about the amount of time and labor involved in the process Well done

[donk_316]

If I bought a set then you know they have the "Donk seal of value approval"...

Protection and added aero for under $200

[98intrigue]

If I bought a set then you know they have the "Donk seal of value approval"...

Protection and added aero for under $200

Paint them orange

[ARD Motorsports]

Looks very cool........ people forget about the amount of time and labor involved in the process Well done

Thanks Steve!

[Coder]

So these fit on the T/A 1.0 front splitters as well then? Thus making them not a big issue if you scrape a speed bump? (well, not as big of an issue)

[ARD Motorsports]

So these fit on the T/A 1.0 front splitters as well then? Thus making them not a big issue if you scrape a speed bump? (well, not as big of an issue)

Sure do!

[Rapidrezults]

Any plans on making an ACR-E extended front splitter replacement?

[ARD Motorsports]

Any plans on making an ACR-E extended front splitter replacement?

Yes, ACR-E replacement is in the works

[KB Viper]

just placed order. Will they ship today?

[ARD Motorsports]

just placed order. Will they ship today?

Already shipped to you ;-)

[KB Viper]

ordered mine last tuesday and they were at my house across the country by friday, thanks ARD for fast service.
the fit and finish was spot on, all screw holes lined up perfect and the outline was exact, they installed in minutes.
here is the finished product on my 14 GTS.

[donk_316]

Mine showed up today too.
Everything is cool, looks awesome. No ARD sticker though... Wars have been fought over for less. Haha!

Sooner or later a Viper vendor will include a sticker with their products

[ARD Motorsports]

Mine showed up today too.
Everything is cool, looks awesome. No ARD sticker though... Wars have been fought over for less. Haha!

Sooner or later a Viper vendor will include a sticker with their products

I'm going to send you a giant windshield banner

I'll send you some in the near future, we are actually out of them right now

[ARD Motorsports]

ordered mine last tuesday and they were at my house across the country by friday, thanks ARD for fast service.
the fit and finish was spot on, all screw holes lined up perfect and the outline was exact, they installed in minutes.
here is the finished product on my 14 GTS.

[IMG]http://i1257.photobucket.com/albums/ii510/kristopherbush/image2_zpskxefjuiw.jpeg[IMG]
[IMG]http://i1257.photobucket.com/albums/ii510/kristopherbush/image3_zpsrqudjzp9.jpeg[MG]

Looks mean! Glad you like them

[ARD Motorsports]

ACR/E Aero in for scanning, Side pieces will be 3D printed! We are also scanning the rear diffuser blades as they hang quite low