BBG Twin disc clutch kit at drag strip with Arrow Stage 2 heads & cam

[Y'orange_UAE]

I wanted to share with you my experience with BBG twin disc clutch kit with billet pressure plate. I got 1.6 in 60ft with wheel spin in first and second gear.

New wheels and tires setup from forgeline (Thanks goes to Mark J) 18 front and rear for the front i will be running skinny tires and try to hit the drag strip soon to get better traction



Here is video for the run and enjoy.



Another view where it shows how the car spinning in second gear

https://www.instagram.com/p/BBGc-SDQiGM/

[1.8t]

Good time. Trap was 218.9kph?

[Y'orange_UAE]

Yes around 136mph

[Jdmuscle]

Very nice sir and glad to see people enjoy their vipers out there!!!

Any future mods in the works?

[cashcorn]

Looks like fun, sounds like great shifting as well. What tires in the rear? thanks for sharing!!

[Steve M]

Second video (the one linked to instagram) was much better than the YouTube one...that video really shows how much it is stepping out on the 1-2 shift. Hauling ass for sure...what was the DA? This is the build with Toddy's (BBG) headers, correct?

[TwinVipers]

Very nice! What tires you running?

[TrackAire]

Very nice runs....that is a beautiful facility.

How much air pressure are you running in your rear tires and what model and size tire are you running?

Cheers,
George

[Y'orange_UAE]

Looks like fun, sounds like great shifting as well. What tires in the rear? thanks for sharing!!

Thanks cashcorn. Nitto NT05R

[Y'orange_UAE]

Second video (the one linked to instagram) was much better than the YouTube one...that video really shows how much it is stepping out on the 1-2 shift. Hauling ass for sure...what was the DA? This is the build with Toddy's (BBG) headers, correct?

Yes you are correct much better the one in instagram. I don't have any idea what was the DA but i know that it's on sea level.

Correct it's the one with BBG headers and Twin Clutch kit.

[Y'orange_UAE]

Very nice runs....that is a beautiful facility.

How much air pressure are you running in your rear tires and what model and size tire are you running?

Cheers,
George

Thanks George. Am running Nitto NT05R tires on stock wheels 19 inch air pressure on that run was 18-19psi.

[SRT BILL]

Y'orange, nice run and it sounds great and great shifting. Can you elaborate a little on the mods? Thanks..

[Steve M]

Yes you are correct much better the one in instagram. I don't have any idea what was the DA but i know that it's on sea level.

Correct it's the one with BBG headers and Twin Clutch kit.

What was the date and approximate time of your run in the video?

[BAD BOYZZ GARAGE]

Khaleefa,

Great videos, the Instagram version lays down your run best IMO. I'd say you have a low 10.sec in your near future with your obvious driving and launch skills!

I appreciate your business and like always anything you need I'm just a phone call away!

Toddy - Bad Boyzz Garage

[Y'orange_UAE]

Y'orange, nice run and it sounds great and great shifting. Can you elaborate a little on the mods? Thanks..

Car mods:

Arrow stage 2 heads and cam
BBG header piece of ART
BBG Twin clutch kit with billet Cover and HRB kit
K&N drop in filter

Picture of the headers:

IMG_3622.jpg

IMG_3621.jpg

IMG_3623.jpg

[Y'orange_UAE]

What was the date and approximate time of your run in the video?

It was on January 28, 2016 time was around 10pm

[KB Viper]

I wanted to share with you my experience with BBG twin disc clutch kit with billet pressure plate. I got 1.6 in 60ft with wheel spin in first and second gear.

New wheels and tires setup from forgeline (Thanks goes to Mark J) 18 front and rear for the front i will be running skinny tires and try to hit the drag strip soon to get better traction



Here is video for the run and enjoy.



Another view where it shows how the car spinning in second gear

https://www.instagram.com/p/BBGc-SDQiGM/

great run! does the clutch chatter at all?

[Steve M]

It was on January 28, 2016 time was around 10pm

Looks like your DA was around +549 ft...not too bad.

http://www.dragtimes.com/da-density-...ime=10:00%20PM

[moe.basilo]

I wanted to share with you my experience with BBG twin disc clutch kit with billet pressure plate. I got 1.6 in 60ft with wheel spin in first and second gear.

New wheels and tires setup from forgeline (Thanks goes to Mark J) 18 front and rear for the front i will be running skinny tires and try to hit the drag strip soon to get better traction



Here is video for the run and enjoy.



Another view where it shows how the car spinning in second gear

https://www.instagram.com/p/BBGc-SDQiGM/

Great run brother

[blknblubkrdude]

Nice driving right there! How did the BBG clutch hold up? Were you using their hydraulic release bearing?