Forgestar F14 Wheels - IN STOCK NOW!

[prpaster]

19055624_10100718010677707_4403610465055113058_o.jpg19095514_10100720978465237_5188681458957392141_o.jpg19221660_10100720978490187_8482875845920746433_o.jpg19143295_10100720978555057_5966539915838831302_o.jpg Finally got some better pics encase anyone else wanted blood red . it looks pretty good !

[monsterauto]

Finally able to post some pics after getting my car back on the road, thanks to Viper Exchange for fixing my electrical issue.
100% satisfied with these Forgestars I got from Tony.

Suspension: ViperExchange Caps
Wheels: 20 inch rear 19 front
tires: 345/30/20 rear 295/30/19 front

IMG_1345[1].jpg
IMG_1352[1].jpgIMG_1347[1].jpg

[Vipermann]

Just put 'em on today: 19x11 & 20x13 with 295 & 345 PSS.

IMG_2158.jpg

IMG_2160.jpg

IMG_2163.jpg

[davidm0209]

Looks great!

[doncmleon]

sicker than a $5 crackwhore!!! lol

[Venomess]

I'd love to have those 5 stars!

[Nine Ball]

I'd love to have those 5 stars!

Unfortunately, our 6-lug Vipers won't work with that wheel. Only one design is available....for now.

[PkB2014]

Finally had a chance to install and test out my wheel and tire setup for some Autocross this weekend. I'm happy with the results. Thanks again Tony.

Matte Black
18x11 - Hoosier R7 315/30r18 (takeoffs 80%)
19x13 - Hoosier R6 345/30r19 (new)

IMG_5337.jpgIMG_5339.jpg

[Nine Ball]

Finally had a chance to install and test out my wheel and tire setup for some Autocross this weekend. I'm happy with the results. Thanks again Tony.

Thanks again for the business! That is an 18x11.0 front wheel, and the 315 fits nice

Tony

[Whozaka]

so here's the question... What size diameter should I go with for my 3rd gen? I went to your website and looks like you sell in a set of 4.

[Nine Ball]

so here's the question... What size diameter should I go with for my 3rd gen? I went to your website and looks like you sell in a set of 4.

It all depends on what you want. I can sell you one wheel, or two wheels if that is what you are asking. At this time, I only have 19x11 / 20x13 cores in stock. The rest of the sizes will be on backorder until late Feb 2018.

[Steve M]

so here's the question... What size diameter should I go with for my 3rd gen? I went to your website and looks like you sell in a set of 4.

18/19 would let you retain the OEM tire sizes, 19/19 looks really nice, and I'd think 19/20 would also look great. 18/18 gives you some options for slicks and drag radials if you are into tracking of some sort. Keep in mind that going to 18s in the back will require a parking brake cable relocation kit, but that's a pretty painless mod.

Here's my 18/18 combo in Gloss Gunmetal Gray with MT drag radials on the back of my '08:

[CoveySRT10]

Steve, you ever make it out to cars and coffee at Austin last season?

[Steve M]

Steve, you ever make it out to cars and coffee at Austin last season?

I never did...it's about 10 minutes from my house, so I don't really have much of an excuse.

[CoveySRT10]

Ya, I live right by Austin Landing so was quite convenient to have it moved from the Greene. You should try to make it out this season. Nice to have a fellow SRT-10 owner in my neck of the woods. Beautiful car btw.

[CoveySRT10]

We have more 18 and 19 inch cores in stock! Only thing on backorder are 20" rears.

Tony

I had the F14's on my '14 ZL1 and went with the Super Deep Concave on the rears and deep concave on the fronts. Is it possible to do Super Deep Concave on our cars?

[Steve M]

Ya, I live right by Austin Landing so was quite convenient to have it moved from the Greene. You should try to make it out this season. Nice to have a fellow SRT-10 owner in my neck of the woods. Beautiful car btw.

Thanks...I'm sure we can figure something out. At the very least, it is nice to see at least one other Viper around these parts...outside of one red Gen 5, I haven't seen another Viper in quite some time around here.

My car will be going under the knife in the spring...those 18s with MT Drag Radials didn't get along with my clutch when I was out at Kil-Kare last August. Hopefully I can get that swapped out and back on the road before the weather gets back to being nice.

[CoveySRT10]

Based on the looks of things I would say you have a bit of time. Good luck with the install

[Whozaka]

Oh, That's totally fine. I would need to save a few doll hairs up anyway. Was just curious. I have stock 18/19's on my car now I was thinking about probably just staying that size.. or just make it easier and do 18's all around. Do you have any personal input about that decision?

[Whozaka]

18/19 would let you retain the OEM tire sizes, 19/19 looks really nice, and I'd think 19/20 would also look great. 18/18 gives you some options for slicks and drag radials if you are into tracking of some sort. Keep in mind that going to 18s in the back will require a parking brake cable relocation kit, but that's a pretty painless mod.

Here's my 18/18 combo in Gloss Gunmetal Gray with MT drag radials on the back of my '08:

see that looks nice. But I feel like the 18's in back are too small. I think I might do the 18/19's to keep OEM look but buy a second set of 18's for radials

[Steve M]

see that looks nice. But I feel like the 18's in back are too small. I think I might do the 18/19's to keep OEM look but buy a second set of 18's for radials

The do look a little small, but I bought them solely to open up options for drag radials. For a street car, I'd stick with 19s in the back just for looks, and I'm sure 20s with 19s in the front would look killer.

All in all, the Forgestar F14s are an incredible value, and they look really nice IMO. I wish they still offered some sort of brushed finish, but their powder coating options are pretty nice. I don't think I'll get around to it this year, but at some point, I'll likely pick up a set of matching 19 inch rears and mount a set of R888s for the street, and put R888s on my current 18x11 fronts (those are 285 Michelin Pilot Super Sports on the front in that pic).

[Whozaka]

The do look a little small, but I bought them solely to open up options for drag radials. For a street car, I'd stick with 19s in the back just for looks, and I'm sure 20s with 19s in the front would look killer.

All in all, the Forgestar F14s are an incredible value, and they look really nice IMO. I wish they still offered some sort of brushed finish, but their powder coating options are pretty nice. I don't think I'll get around to it this year, but at some point, I'll likely pick up a set of matching 19 inch rears and mount a set of R888s for the street, and put R888s on my current 18x11 fronts (those are 285 Michelin Pilot Super Sports on the front in that pic).

I guess at this point I just have to figure out what color I should go with?

I have a Red/White coupe so Im thinking gloss black. hmm....

[davidm0209]

Here is a picture of my 19/20 F14 combo in bronze burst. Stock suspension IMG_6990.jpg .

[13COBRA]

I had the same on my ACR! I just had them refinished in gloss black. The Bronze Burst clashed too much with my red/black paint.

[Nine Ball]

David, those pics look amazing! Thanks for sharing.