DSE-VP-CC-002-xxx Gen V Viper Catch Can Kits

[SSGNRDZ_28]

DSE offers complete catch can kits for the Gen V Viper. Kits include everything needed for installation. Hoses are cut to length by the installer for maximum flexibility on installation location. Links to order and installation instructions can be found on the website http://dougshelbyengineering.com/Viper.html

Catch Can Overview
Blow-by gasses vented from the PCV system contain oil and fuel that can be ingested back into the intake manifold and airbox. This “sludge” can contaminate and reduce flow through the air filter, reduce the effective octane rating of fuel, increase chance of knock / detonation, reduce power, and fuel economy. Catch cans condense and filter oil and fuel from blow-by gasses and reduce or eliminate the amount of contaminants entering the engine.

Catch can setup depends on personal preference and expected vehicle usage. Typically a sealed catch can setup is used for a vehicle driven on the street, while a vented setup is preferred for the track. Both setups are equally effective at cleaning blow by gasses. A sealed system keeps the emissions system intact and inserts the can inline to collect oil/fuel. A vented system removes the PCV valve and system and vents the filtered air into the atmosphere instead of back into the engine. Typically used for track only cars and can produce fumes that could be undesired for the street. Relief of excess pressure and drag from the engine components and may provide a performance advantage under high RPM/load. Since the oil is exposed to the atmosphere, more frequent oil changes are recommended as is typical with track only vehicles

DSE Catch Can Kit Features

- Non invasive: No drilling.
- Bracket clamps around the front or side crossbars, the
design reduces potential marking or damage of the bar.
- Easy and quick installation, three screws install the bracket.
- Universal fit allows Catch can to be mounted in multiple DSE dual input vented and single input sealed catch cans locations around the engine bay.
- Lightweight, pocketed design; billet aluminum.
- Durable hard anodized finish.

12301469_904539252927212_4721982025722196750_n.jpg

Single sealed catch can kit P/N: DSE-VP-CC-002-SSK $395.00

- Sealed setup inserts catch can inline between the passenger or driver side valve cover and the intake manifold or
airbox and keeps the emissions system intact.
- Keeps oil out of the intake manifold or airbox while maintaining a sealed system.
- Dingle input can, bracket, hose barbed splice, 5 feet of hose, ty-wraps
- Typical application: Passenger side installation for 2016+ Street/Track Vipers to keep intake manifold clear of oil.

12279007_904539219593882_6497701295667320200_n.jpg

Dual sealed catch can kit P/N: DSE-VP-CC-002-DSK $745.00

- Two single catch can kits used to prevent oil from entering the airbox and intake manifold.
- Typical application: 2013-2015 Vipers that have not been modified to 2016+ driver valve cover specs will prevent oil from entering the airbox and contaminating the air filter which is more likely on these cars.

12308707_904539706260500_2797253847804372978_n.jpg

Single can vented catch can kit (OFFROAD ONLY) P/N: DSE-VP-CC-002-SVK $495.00

- Inputs to the single can from both valve covers with a vented / filtered can output.
- Airbox and intake manifold are capped, PCV valve is removed, hoses from the airbox and manifold are removed.
- The most cost effective and lightweight solution to catch oil from both valve covers.
- Preferred configuration for track performance, however, more frequent oil changes are recommended
- May emit oil odor / fumes / residue from filter under certain driving conditions
- More frequent oil changes recommended as is typical with a track car
- Dual input vented can, bracket, PCV delete adapter, 4 barbed hose splices, 10 feet of hose, 2 caps, ty-wraps
- Typical application: Most economical track-only setup for 2013+ cars

12308293_905813586133112_3941569944966788817_n.jpg

Dual vented catch can kit (2 cans, OFFROAD ONLY) P/N: DSE-VP-CC-002-DVK $740.00

- Two vented catch cans (mount a vented catch can on each side to prevent routing hose across the engine bay)
- More capacity, ability to inspect oil levels individually, less restricted airflow further reducing engine drag
- Typical application: Maximum performance track-only setup for 2013+ cars

12274516_905813642799773_6784014835743694834_n.jpg