My Viper is off To Viper Exchange for Heads & Cam!!

[TexasTonka]

Congrats and welcome to teh VE H&C club! The car is so much better with the H&C! Mine is a beast! Hope you like it and let m eknwo how that retune goes with the decel pop. I may do the same.

[Aspirations57]

Home yet????

[FLATOUT]

Home yet????

Kris called tonight and made it home safe and sound. I want to thank Kris again for letting us build his car.

Andy

[Nine Ball]

Idle sounds good. You mentioned stock mufflers. Did you cut off the inlet neck-down and make them a full 3" out from the headers?

[TurboTA]

Whats the difference between the 14 and 15 TB's besides plastic to metal?

[mjorgensen]

Whats the difference between the 14 and 15 TB's besides plastic to metal?

The gears inside are different also so the tune has to take into account the different signal and ratios needed to work that's why the tune is not compatible.

[DZnutz]

engine has to come out for head install?

[Dusty1]

The burble in mine is at about 1400 rpm, the only real downside is if you are in stop and go traffic it can contribute to some bucking. I like it tho for the sound.

Richard

[FLATOUT]

engine has to come out for head install?

It's quicker and cleaner that way. When we did the procedures with Arrow we found that it saved about 3 hours of labor time to do it engine out.

Andy

[Solid Red 98]

Your car is amazing! How are you getting around CA smog with those mods? Also I'd love to hear your stock exhaust set up with the headers, cats and heads/cam set up under acceleration!