Page 1 of 2 12 LastLast
Results 1 to 25 of 47

Thread: Turbo my TA?

  1. #1
    Enthusiast
    Join Date
    Nov 2015
    Location
    New York City
    Posts
    95

    Turbo my TA?

    Hey guys it's Matt, I just signed up for the forum. I bought Orange TA #20 back in January. I was waiting for D3 to finish their supercharger package to decide if I wanted to go Twin Turbo or Supercharger and what shop I want to send it to. So the time is now, I'm leaning towards turbo and I want to make a decision in the next few days. I've been driving a Viper for years and have a local Viper expert but this is the first one I am going to build. I'm a little nervous because I do NOT have a local Viper performance shop and any of the reputable shops that do this build are over 1,000 miles away. Looking forward to hear what you guys have to say.
    Last edited by TurboTA; 11-12-2015 at 07:07 PM.

  2. #2
    Enthusiast
    Join Date
    Jan 2015
    Location
    Virginia Beach
    Posts
    127
    Curious why you are leaning towards turbo vs procharger.

  3. #3
    I wouldn't turbo/SC any 13 or 14 Viper until you are out of the woods on the spun bearing issue. Lot's of vipers spinning bearings under 8k miles (mine included). If you have a turbo you just pissed away ~30k to get a new engine...or $8k to rebuild.


    Personally I wouldn't do anything to void a factory warranty.

  4. #4
    Enthusiast
    Join Date
    Nov 2015
    Location
    New York City
    Posts
    95
    I have 10k miles on the car. Leaning towards turbo because the kits are ready and tested.

  5. #5
    Enthusiast
    Join Date
    Oct 2013
    Location
    Orlando
    Posts
    2,541
    You have Tators in NY, you're fine.

  6. #6
    Enthusiast
    Join Date
    Nov 2014
    Location
    Bay Area, CA
    Posts
    1,053
    Sounds like you already made up your mind, TurboTA.

  7. #7
    Enthusiast
    Join Date
    Nov 2015
    Location
    New York City
    Posts
    95
    Tator is quite a ways from me but definitely closer than the others.

  8. #8
    Quote Originally Posted by BJG32 View Post
    I wouldn't turbo/SC any 13 or 14 Viper until you are out of the woods on the spun bearing issue. Lot's of vipers spinning bearings under 8k miles (mine included). If you have a turbo you just pissed away ~30k to get a new engine...or $8k to rebuild.


    Personally I wouldn't do anything to void a factory warranty.
    12000 km on mine so far no issues!!

  9. #9
    Quote Originally Posted by TurboTA View Post
    Hey guys it's Matt, I just signed up for the forum. I bought Orange TA #20 back in January. I was waiting for D3 to finish their supercharger package to decide if I wanted to go Twin Turbo or Supercharger and what shop I want to send it to. So the time is now, I'm leaning towards turbo and I want to make a decision in the next few days. I've been driving a Viper for years and have a local Viper expert but this is the first one I am going to build. I'm a little nervous because I do NOT have a local Viper performance shop and any of the reputable shops that do this build are over 1,000 miles away. Looking forward to hear what you guys have to say.
    Call Nth Moto, ask for Aaron. They currently Have my TA 2.0 and it's being added with TTs. Feel free to PM with any questions.

  10. #10
    Enthusiast
    Join Date
    Nov 2013
    Location
    South FL.
    Posts
    893
    Good to see you on here Matt. This is Paul we met at the viper experience.

  11. #11
    Enthusiast
    Join Date
    Nov 2015
    Location
    New York City
    Posts
    95
    I talked to most shops. Just need to make my final decision.

  12. #12
    Enthusiast
    Join Date
    Nov 2015
    Location
    New York City
    Posts
    95
    Quote Originally Posted by pdv25 View Post
    Good to see you on here Matt. This is Paul we met at the viper experience.
    Yeah Paul, I'm headed back to Vegas for work at the end of Jan. Perfect timing to get out of the cold here in NY.

  13. #13
    Enthusiast
    Join Date
    Oct 2015
    Location
    Austin,TX
    Posts
    127
    HMmm i like that orange... You should send it down to us. We can have matching TT gen V

  14. #14
    Enthusiast
    Join Date
    Jun 2014
    Location
    San Diego
    Posts
    1,252
    Quote Originally Posted by BJG32 View Post
    I wouldn't turbo/SC any 13 or 14 Viper until you are out of the woods on the spun bearing issue. Lot's of vipers spinning bearings under 8k miles (mine included). If you have a turbo you just pissed away ~30k to get a new engine...or $8k to rebuild.


    Personally I wouldn't do anything to void a factory warranty.
    I believe when you are over 5k miles if you haven't blown up you are out of the woods. my first 14 spun a bearing at 4500 miles and now my current 14 has 12,500 miles on and i've beaten on it pretty hard. i started with HP tuners, pulley and headers and now the arrow pcm and it's rock solid.

  15. #15
    Enthusiast
    Join Date
    Nov 2015
    Location
    New York City
    Posts
    95
    Quote Originally Posted by mike@calvomotorsports View Post
    HMmm i like that orange... You should send it down to us. We can have matching TT gen V
    You're on the list.

  16. #16
    Enthusiast
    Join Date
    Jun 2014
    Location
    San Diego
    Posts
    1,252
    Quote Originally Posted by TurboTA View Post
    Hey guys it's Matt, I just signed up for the forum. I bought Orange TA #20 back in January. I was waiting for D3 to finish their supercharger package to decide if I wanted to go Twin Turbo or Supercharger and what shop I want to send it to. So the time is now, I'm leaning towards turbo and I want to make a decision in the next few days. I've been driving a Viper for years and have a local Viper expert but this is the first one I am going to build. I'm a little nervous because I do NOT have a local Viper performance shop and any of the reputable shops that do this build are over 1,000 miles away. Looking forward to hear what you guys have to say.
    D3 and Calvo are about the same $ for TT. the differences I know of are: Calvo runs air to air intercooler, custom turbo headers, Tilton clutch and Motec. D3 runs a air to water intercooler, stock manifolds, mantic clutch and ProEFI. D3 modded my c6 ZR1 and did a great job, I have no experience with Calvo. You should contact Nasty GTS, he was the owner who got screwed by RSI and then took the car to D3 and they fixed and got his TT running.

  17. #17
    We do have an air to water as an optional upgrade. But the base kit does come with air to air. Between our in-house CNC and design team we can build anything in house like every fabricated or machined component on our kits are.

  18. #18
    Glad you are thinking of using us Matt and I'm sure whoever you choose you will love having a tt gen v viper!

  19. #19
    I have been making over 1000RWHP and 1000TQ on mine for over a year, 3k full kill racing miles. If it has survived that, it will survive some boost. In Matts case racing and driving for 10k miles he will be beyond fine.

  20. #20
    Enthusiast
    Join Date
    Mar 2014
    Location
    NY
    Posts
    880
    OK im confused, u said u have a local viper expert but not a local viper performance shop???

  21. #21
    Turbo all day everyday. Mine will be turbo one day.

  22. #22
    Moderator
    plumcrazy's Avatar
    Join Date
    Oct 2013
    Location
    ALL OVER
    Posts
    3,011
    Quote Originally Posted by Boba Fett View Post
    OK im confused, u said u have a local viper expert but not a local viper performance shop???
    tator is not a tuner/performance shop and there isnt anyone else within a couple of states that id let touch a viper. i assume that is what he meant
    THE IGNORE FEATURE WORKS, TRY IT...

  23. #23
    Quote Originally Posted by TurboTA View Post
    Hey guys it's Matt, I just signed up for the forum.
    Welcome to the forum

  24. #24
    Quote Originally Posted by plumcrazy View Post
    tator is not a tuner/performance shop and there isnt anyone else within a couple of states that id let touch a viper. i assume that is what he meant
    The sad truth.

  25. #25
    Enthusiast
    Join Date
    Nov 2013
    Location
    Clearwater, FL
    Posts
    1,521
    Looking forward to help you pay for that TT build


 
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •