Offical GenV cool info thread?

[mjorgensen]

Thought this would be useful for owners,

1st up a cool stripe measurement picture http://viper.c-myweb.com/images/forums/stripe-top.jpeg

[mjorgensen]

Another one for the ACR folks or if you are just curious

2016ACRsuppliment.pdf

[mjorgensen]

Cool stuff from Conner.

https://www.flickr.com/photos/brownd...57650272854643

[SRT BILL]

Mark, fantastic post!! Thank you.

[genVer]

Another one for the ACR folks or if you are just curious

2016ACRsuppliment.pdf

Awesome idea for a sticky! I went ahead and cleaned up the ACR supplement a little bit for you.

[Rapidrezults]

Awesome thread.

[98intrigue]

Anyone notice the TA Orange 2.0?

[City]

Awesome idea for a sticky!

My thoughts exactly.

Thanks much Mark!

[ViperSmith]

I bought the domain http://viper.repair to put up a wiki, i need to get around to it

[viper04]

Cool stuff from Conner.

https://www.flickr.com/photos/brownd...57650272854643

Thanks and nice as always, never get tired of seeing pictures from Conner.

[Simms]

Great info!

[docwviper]

Thought this would be useful for owners,

1st up a cool stripe measurement picture http://viper.c-myweb.com/images/forums/stripe-top.jpeg

Any measurements on the ACR stripes? This would be helpful for the clear bra companies. If I can get the measurements I was going to have expel line up the cuts with the stripes. Thanks!

[SSGNRDZ_28]

Thought this would be useful for owners,

1st up a cool stripe measurement picture http://viper.c-myweb.com/images/forums/stripe-top.jpeg

Here is an update with more stripe dimensions:

http://driveviper.com/forums/threads...ipe-Dimensions

stripe-back.jpgstripe-front.jpgstripe-top.jpg

[SSGNRDZ_28]

Spring Rates / Sway Bar Specs / Alignment Specs for the SRT / GT/GTS/TA/ACR


Springs-Sway-Align.jpg

[sadil]

Is it possible to organize a visit to the Conner Viper plant?

[dasvolk]

Oh man this is great. More TA 2.0 info please! It's interesting to see the differences between the SRT and the TA since I've owned both and feel there's a universe of difference between the way the two cars feel at the limit as well as around town.

[GBS]

Nice, I always enjoy looking at CAAP pictures.

[ddominator1]

looks just like mine

Anyone notice the TA Orange 2.0?

[docwviper]

Any measurements on the ACR stripes? This would be helpful for the clear bra companies. If I can get the measurements I was going to have expel line up the cuts with the stripes. Thanks!

Here is an update with more stripe dimensions:

http://driveviper.com/forums/threads...ipe-Dimensions

stripe-back.jpgstripe-front.jpgstripe-top.jpg

[Space Truckin]

Cool stuff from Conner.

https://www.flickr.com/photos/brownd...57650272854643

Never get tired of looking at pix from Conner or Prefix, thanks for posting Mark

[mjorgensen]

ACR stripes:

Black center band

Front fascia bottom 20"
Front of hood top of fascia 20-1/2"
Back of hood 24-1/2"
Top of windshield 24"
Back of roof panel 24-1/8"
Bottom of back glass deck lid 23-1/2"
Back edge of deck lid and over lip 23-5/8"
Fascia rear 23-1/2"

Gap between stripes 1"

Drivers stripe 3-1/2"

[genVer]

Thanks for taking the measurements Mark; I've updated the original post in the how-to section with the below images as well.

ACR stripes:

Black center band

Front fascia bottom 20"
Front of hood top of fascia 20-1/2"
Back of hood 24-1/2"
Top of windshield 24"
Back of roof panel 24-1/8"
Bottom of back glass deck lid 23-1/2"
Back edge of deck lid and over lip 23-5/8"
Fascia rear 23-1/2"

Gap between stripes 1"

Drivers stripe 3-1/2"

[docwviper]

ACR stripes:

Black center band

Front fascia bottom 20"
Front of hood top of fascia 20-1/2"
Back of hood 24-1/2"
Top of windshield 24"
Back of roof panel 24-1/8"
Bottom of back glass deck lid 23-1/2"
Back edge of deck lid and over lip 23-5/8"
Fascia rear 23-1/2"

Gap between stripes 1"

Drivers stripe 3-1/2"

Thanks so much for this. Crazier question. The drivers stripe, how many inches is it off the side of the panel at various locations? I think it will help expel with creating the bra,thanks!

[mjorgensen]

Thanks so much for this. Crazier question. The drivers stripe, how many inches is it off the side of the panel at various locations? I think it will help expel with creating the bra,thanks!

Too many rounded edges to really do a good job of measuring.

[Uranium235]

This is all really cool...does anyone have this same info for the SRT stripes? It doesn't seem like most dig them, but I actually prefer them. Or is there an SRT owner with stripes and a tape measure and few minutes on his hands?

Matt