Woodhouse Heads & Cam Car at the Strip

[Jack B]

Thanks for the input, but, you can not compare 60 ft and 0-60mph numbers.

Did you have VDC off ? I dropped my 0-60 from 4.1 (which is around a 2.0 60ft.) to 3.5 5 x times in a row.

VDC off , engage LC and let it rev to 4500 and quickly release the clutch. I got a little wheel spin and sold 3.5 0-60..

Might not work for you since track was sticky.

[FLATOUT]

You would love the McLeod,
the price Is right, plus, it uses the stock slave.

Jack do you have a part number for the McLeod?

[Jack B]

Thanks for the input, but, you can not compare 60 ft and 0-60mph numbers.

Did you have VDC off ? I dropped my 0-60 from 4.1 (which is around a 2.0 60ft.) to 3.5 5 x times in a row.

VDC off , engage LC and let it rev to 4500 and quickly release the clutch. I got a little wheel spin and sold 3.5 0-60..

Might not work for you since track was sticky.

[Jack B]

RXT
6975-07M
1-1/8 X 26 Sprung Hub

It is slick, the assembly come pre-compressed, you bolt what they call the adapter plate to the flywheel, the forward disk mates with the adapter and the adapter mates with the flywheel, therefore, you do not have the new disk trying to bed on the old flywheel surface. This was well thought out.

Jack do you have a part number for the McLeod?

[FLATOUT]

Thanks I may give this a shot!

RXT
6975-07M
1-1/8 X 26 Sprung Hub

It is slick, the assembly come pre-compressed, you bolt what they call the adapter plate to the flywheel, the forward disk mates with the adapter and the adapter mates with the flywheel, therefore, you do not have the new disk trying to bed on the old flywheel surface. This was well thought out.

[vegasgtr]

Thanks for the input, but, you can not compare 60 ft and 0-60mph numbers.

right , while you can't compare. A 4.1 and a 3.5 would make a difference in your ET. you are hitting 60mph .6 quicker. that would translate to a few tenths , I guarantee that.