Medusa #1 gets a roll bar installed!

**Herrsss** · 10-05-2015

Those of you who know me know I'm always aware of safety especially in a roadster. I have intended on installing a roll bar since I took delivery a year ago this month but somehow time escaped me as I procrastinated since I didn't want to give the car up for a couple weeks to get it done. Now that it's prime top down season in Houston (until next June!) I finally did it!

Kenny Bumbera, owner of Bumbera's Performance Associates, did an over the top install of an Autoform roll bar! He had to modify a Gen IV roll bar to fit a Gen V, completely disassemble the cabin and build a new fiberglass back panel since most of the electronics are underneath it. I have examined it VERY closely and it looks absolutely perfect. Anyone needs a roll bar take it to Kenny - he's da man!

Here are a few cell phone pictures. The little nick on the seat belt guide has been touched up already - the finger pointing to the small screw shows it is modular and can easily be taken apart if the electronics underneath need servicing. They worked really hard to match the paint to the seats and put a flat finish on it so it looks similar to the leather!

Roll bar 1 by Beth Sewell, on Flickr

Roll bar 4 by Beth Sewell, on Flickr

Roll bar 3 by Beth Sewell, on Flickr

Roll bar 2 by Beth Sewell, on Flickr

**Stretch** · 10-05-2015

Looks great!!

**Herrsss** · 10-05-2015

Originally Posted by Stretch

Looks great!!

Thank you!

**Murpowa** · 10-05-2015

Fantastic!

**ViperDC** · 10-05-2015

Looks great. The Gen V really works as a convertible

**Space Truckin** · 10-05-2015

Beautiful....

**FLATOUT** · 10-05-2015

Very nice Beth look forward to seeing it this week!

Andy

**98intrigue** · 10-05-2015

As good as that looks, why hasn't Dodge came out with a vert yet?

**J TNT** · 10-05-2015

That looks awesome ! With great attention paid to detail !

**Herrsss** · 10-05-2015

Originally Posted by 98intrigue

As good as that looks, why hasn't Dodge came out with a vert yet?

I continue to ponder the same thing. I held out with my '08 roadster for a long time after the Gen V came out thinking they'd bring out a convertible but when we were at NVE1 a year ago and Prefix/Viper Exchange rolled out the Medusa I figured Dodge wouldn't be bringing one out any time soon so I committed to buy one within 30 minutes of Ben and Bernie rolling it out! Ralph has seen it and signed the valve cover with xoxo's!!! Guess that means he likes it too!

**Vprbite** · 10-05-2015

Looks really clean. Well done.

**99RT10** · 10-05-2015

Originally Posted by 98intrigue

As good as that looks, why hasn't Dodge came out with a vert yet?

^^^^^^^^^^^^This^^^^^^^^^^^^^^

Dodge should have stepped up and built this car first. Beautiful car!!!!

**ACR Steve** · 10-05-2015

looks amazing .....well done

**345s-bspinnin** · 10-05-2015

That fit and finish look very OEM-like. Like!

**cubican** · 10-05-2015

Great job, looks much better and the proportion from the seat back look correct now.not a big fan of the red but that's just personal taste. Well done!!

**johniew398** · 10-05-2015

Very professional job.

**ViperDog** · 10-05-2015

Thanks for the info. Looks good and is functional unlike the Gen IV factory.

**Slithr** · 10-05-2015

Looks Great Beth! I need to do that to our Gen III

**Herrsss** · 10-05-2015

Originally Posted by Slithr

Looks Great Beth! I need to do that to our Gen III

Alan, give Kenny a call and he'll fix you right up. I'm very impressed with his attention to detail and incredible care he and his staff took to make this perfect

**AutoformSteve** · 10-05-2015

Looks great! nice job by Kenny and his crew on the installation....thanks for your purchase of the Autoform roll bar... I think it is just what the Medusa needed. We are currently doing a custom install of another one in our shop here in Michigan as well.

**FLATOUT** · 10-05-2015

Originally Posted by 99RT10

^^^^^^^^^^^^This^^^^^^^^^^^^^^

Dodge should have stepped up and built this car first. Beautiful car!!!!

They did and it looks exactly like the MEDUSA. I saw it at DOW in Michigan in the back under a cover. I am glad the MEDUSA's are available though for people that want one.