Tpms relearn tool

**Stubbygda** · 09-01-2015

i have a 2015 ta 2.0 and need to be able to relearn/reset the tpms when switching between track wheels and street wheels. I have been told that they are not self learning and that everytime i swap them i will have to have them relearned/reset. Has anyone used the ATEQ V15 or 30 tool successfully or have another option in this price range? I have also been looking for the relearn procedure for the 2015 viper and cant seem to find it anywhere if anybody has a link I would appreciate it.
Thanks.

**Dman** · 09-01-2015

Unless the gen5 is different, previous gens must be done at the dealer using their computer, it's been a long standing pain in the arse. If there's a new way of doing it on the gen5, that would be great but I've not heard of it.

**09 ACR** · 09-01-2015

they will relearn just put your wheels on drive it a short distance the new wheels will registered

**Stubbygda** · 09-01-2015

Thanks for the info. I will try tomorrow and see if they relearn.

**genVer** · 09-02-2015

Originally Posted by 09 ACR

they will relearn just put your wheels on drive it a short distance the new wheels will registered

Hmmmm, mine didn't during my last track event. I have sensors in my track set but TPMS light was on that entire weekend. Was hoping to find out discount tire would be able to reset them as I'm going to COTA this weekend.

**Stubbygda** · 09-02-2015

Just tried out relearn on new tpms. It worked perfectly it relearned in 2-3 miles. What an improvement!! It must be a 2015 or later thing?

**Nine Ball** · 09-02-2015

You can use either the tool, or it will relearn after driving. Only applies to Gen 5 Vipers, using factory sensors.

**Capt Van** · 09-02-2015

Originally Posted by 09 ACR

they will relearn just put your wheels on drive it a short distance the new wheels will registered

This, my 14 took about 3 or 4 miles

**roadrunner** · 09-02-2015

The CORAX TPMS (from Schraeder) system has been in play since the launch of the GEN V viper... previous Gens (III and IV) had a manual learn only system.

**Dman** · 09-02-2015

Originally Posted by Nine Ball

You can use either the tool, or it will relearn after driving. Only applies to Gen 5 Vipers, using factory sensors.

Ahh, that's great, finally like other cars I have, just swap the wheels sets around and it just does it on it's own. I hated dealing with the TPMS relearn crap on the gen3 and 4.