D3 Performance Engineering Gen5 Procharger Development

[viper04]

It's based off a current off the shelf unit so if all goes to plan it will be extremely streetable and easy to drive. We have the same clutch in a couple high powered vettes with very good results. We'll make a separate thread once we have this one up and running in our car

Nice please keep us posted on this.

[Evan@D3PE]

We received our Triple disc we've been working with Mantic Clutch on as well as our CNC supercharger brackets yesterday! Time to get back to work!

[vegasgtr]

was curious to see if stock would hold on base kit.

[Evan@D3PE]

was curious to see if stock would hold on base kit.

Based on others results I would say it's a possibility but not likely with any kind of drag racing. We don't really plan to push the stock clutch so that will be up to the end user if they want to try it or not

[EdwardETraylorIII]

How's that tuning going, AntiLag?

[Urbamworm]

Nice, was a little sad seeing this on hold waiting for parts. Think this thing might actually be all together, running and tuned by the end of next week?

[moe.basilo]

We received our Triple disc we've been working with Mantic Clutch on as well as our CNC supercharger brackets yesterday! Time to get back to work!

Evan, any progress with the build

[G37Sam]

Evan, any progress with the build

Haha someone's pocket is starting to itch!

[moe.basilo]

Haha someone's pocket is starting to itch!

hahaha since D3 started this thread actually

[Evan@D3PE]

Closer closer! Going ahead and getting the CNC'd parts anodized so we don't have to take them off again! Here's the latest with the air box concept

[vegasgtr]

wow , love the design ! smart.

[Evan@D3PE]

Brackets and pulley back from Anodize and black F1X on the way

[timberwolf]

Brackets and pulley back from Anodize and black F1X on the way

Sounds like you have everything now!!

[Evan@D3PE]

Sounds like you have everything now!!

Still will be going on and off with everything, pending testing, for coating and jigging but should be able to start up at least very soon

[moe.basilo]

Still will be going on and off with everything, pending testing, for coating and jigging but should be able to start up at least very soon

Great job evan,

Any estimated time frame to start up the car?

[ViperSmith]

Moe's money is burning a hole through his pocket, from Dubai all the way to Texas!

[Evan@D3PE]

Should be able to start up with the blower mounted by the end of the week. Tuning will be a little more time though as we document everything, test, coat items, and work on install instruction as we go along

[Jdmuscle]

Looking better by the minute... Can't wait to see the results!!

[moe.basilo]

Moe's money is burning a hole through his pocket, from Dubai all the way to Texas!

Haha your damn right i am .. Very excited actually lol

Should be able to start up with the blower mounted by the end of the week. Tuning will be a little more time though as we document everything, test, coat items, and work on install instruction as we go along

Thats amazing thanks for the heads up evan, you guys doing a great job
Looking forward to it and please keep us updated.

[Evan@D3PE]

Determined to start this thing up tomorrow! Got the base bracket installed and crank pulley installed today. Little bit of hardware to grab and the blower will be in tomorrow!

[Space Truckin]

Just a tad over 2 months, excellent work. Subscribed

[Rapidrezults]

Beautiful work. I can't wait to see the results.

[TitanSnake]

it'll be tough waiting for the arrow SC knowing this is available.

[Jdmuscle]

Arrow going to be a centrifugal or a twin screw?

[Coloviper]

A screw is the way to go but this centrifugal looks pretty good and in the end, a bird in the hand is worth two in the bush.