Anyone remove their dead pedal?

[gpearl]

I adjusted the dead pedal as far back as it will go, and I still find my left leg is more flexed than I'd like when I'm off the clutch. Thinking of removing it as there is still a few inches behind it to the firewall. Has anyone done this? Is there a reason not to?

[SuperBird4404BBL]

I did not remove it from my '06 or the '14, yet.
Don't use it. I'm 6'3" and find it unusable.

[pdv25]

Took mine out. More comfortable without it.

[SuperBird4404BBL]

I think I will too.

[Steve M]

I removed the one in my Gen 4...way better with it gone.

[FSTENUF]

I have mine about a 1/2" IN FRONT of the clutch pedal. That way I am never riding the pedal and my foot is resting just out of the way if I need a quick stop or a fast down shift to teach someone a lesson . I think it is one of the better low tech ideas.

[Mamba52]

Mine is gone too. So much better.

[mblgjr]

No, but have heavily considered removing mine as well.

[cashcorn]

Mine has been gone for 14 months. lol week after delivery.

[LA STIG]

I'm 6'3" and I removed the dead pedal and bought a piece of aluminum bar stock and re-mounted the pedal on the bar stock so it was as close to the floor as possible. It works great.

[gpearl]

After taking out the pedal, my leg wasn't quite long enough to rest my foot on the firewall. I wasn't comfortable having no place to rest my foot and not being able to brace myself in the seat.

Today I had the seat lowering kit put in which is great. I put the dead pedal back and now the issue is worse than it was before. With the seat lower my leg is even more flexed.

LA Stig, I see your suggestion above, thanks. Any other ideas?

[ViperSmith]

Ripped mine out today, it is like driving a completely different car.

[lochnessmonster]

I'm 5' 11". I adjusted mine. I think it was a 13 mm. I changed the angle on it and moved it back. It works well now.