Gen 2 Ashtray/Cupholder Project

[ZZ SRT]

Hey guys,

Don't post here a ton but thought I would share a project I've been working on.

I'm an engineer, and I have a 3D printer, so I like to design/create cool stuff for our Gen 2 vipers.

Here's something I've been working on for the past few weeks. I've always hated the ashtray in my '97 GTS because it rattles, and I obviously don't smoke in my Viper (or at all for that matter) so it was pointless to me.

Another thing about the Gen 2 we all know, and I sometimes appreciate for its racecar purity, is that our cars do not have a cupholder. This is fine, but sometimes I bring the old ball and chain along for a ride, or I'm on a long Viper cruise or roadtrip to a car show and enjoy having a drink in the car.

I decided to try and remedy both of these above annoyances in one simple drop-in solution.

My goals for the project were:

1) Create a filler for the ashtray that looks cool and doesn't rattle
2) Create a design where accessories can be added into the ashtray for functional use
3) Accomplish 1&2 without permanently modifying or damaging the car in any way, shape or form

I know #3 is important to many of us since these cars are getting older by the day and we don't want to ruin or damage anything OEM.

Here's my stock viper:

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_092717_zps9fjpamzr.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_092717_zps9fjpamzr.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_092723_zpsz7rifi2j.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_092723_zpsz7rifi2j.jpg.html)

Here's what I came up with.... I designed it with modularity in mind.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_092813_zpspce8adhe.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_092813_zpspce8adhe.jpg.html)

The circles you see are magnets. When you simply want a cool filler for the ashtray, you put in the magnetic Viper logo plate.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_092904_zpscetij4e5.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_092904_zpscetij4e5.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_092917_zps8dus2tnn.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_092917_zps8dus2tnn.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_092933_zps6rexvrs4.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_092933_zps6rexvrs4.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_093725_zpst9xrgvst.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_093725_zpst9xrgvst.jpg.html)

Okay, so now for the functional aspect. I designed a cupholder to fit into the insert which can be stored in your center console compartment when you don't need a drink, but can be swapped in seconds.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150414_171908_zpsxmbwlctp.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150414_171908_zpsxmbwlctp.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_093407_zpsw1nkvixq.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_093407_zpsw1nkvixq.jpg.html)

Cupholder in the closed position. Plenty of room for the passenger :cool:

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_093456_zpshhbja3db.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_093456_zpshhbja3db.jpg.html)

Open. Still ample room for the passenger (I'm 6'3").

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_093552_zpsd2luawdv.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_093552_zpsd2luawdv.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_093658_zpsubvbfwim.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_093658_zpsubvbfwim.jpg.html)

Drink safely in position :)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_093342_zpsdmffhiqk.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_093342_zpsdmffhiqk.jpg.html)

Plenty of room in the center console!

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150418_093833_zpsvrgyo0uc.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150418_093833_zpsvrgyo0uc.jpg.html)

I think the coolest thing about this design is that I could think of endless magnetic accessories that could be added on for increased functionality. I welcome any ideas!

I'm considering selling these for fun to the viper community. Still working on price because I have to consider my time/materials/etc but I could make the color to match your car, just like mine in red. I also may try one skinned in carbon fiber.

I do this for fun, but if anyone else is interested it would be something fun to provide.

Thanks for reading :)

[ZZ SRT]

Alright, prototype #2 is complete, and addressed a couple of the things I did not like about the first design.

1st concern: Will the cupholder be able to support a heavy drink under aggressive cornering or driving?

2nd concern: A fixed L shape design did not lend well to storage in the center console. It fit but it was not very flexible for storage.

To address the issue of strength, I added 1.5" of material below the cupholder, with a bumper to sit below the center console material and rest against the carpet. This creates a much sturdier design when downward force is applied (a.k.a. a heavy drink).

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/cupholder_hinged_3_zpss0ymotoh.png (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/cupholder_hinged_3_zpss0ymotoh.png.html)

By adding more length to the cupholder arm, it also increased the storage size of the unit.

To fix this, I added a hinge feature. I designed it with a stop in one direction, so when the hinge is open and in use, it cannot rotate.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150425_093910_zpsmllc1tsh.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150425_093910_zpsmllc1tsh.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150425_093917_zpstb4rgbii.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150425_093917_zpstb4rgbii.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150425_094341_zpspkyc0wtc.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150425_094341_zpspkyc0wtc.jpg.html)

- - - Updated - - -

Test Fit:

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150425_100415_zpsl41kgudo.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150425_100415_zpsl41kgudo.jpg.html)

Cleaned up, painted, and magnets added.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192032_zpsbiq2fpk4.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192032_zpsbiq2fpk4.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192141_zpspyqrypda.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192141_zpspyqrypda.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192152_zpsmzxfh7pf.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192152_zpsmzxfh7pf.jpg.html)

Storage mode with hinge closed.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192340_zpsja9vgly9.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192340_zpsja9vgly9.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192349_zps8drkj8x8.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192349_zps8drkj8x8.jpg.html)

Prototype 1 in storage mode compared to Prototype 2 with hinge:

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192431_zpsroglunpf.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192431_zpsroglunpf.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192437_zpsbcj4q9au.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192437_zpsbcj4q9au.jpg.html)

Installed:

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192632_zpsklmyfwqo.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192632_zpsklmyfwqo.jpg.html)

As you can see, this new design with the bumper keeps any chance from the cupholder contacting the finished center console material, even under heavy load, which could cause damage to the finish.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192649_zps1zx043om.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192649_zps1zx043om.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192658_zpsprz2buxw.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192658_zpsprz2buxw.jpg.html)

Apologies for the dust :)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192759_zpsrnvgc6ry.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192759_zpsrnvgc6ry.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/20150426_192816_zpsarm5w0zy.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/20150426_192816_zpsarm5w0zy.jpg.html)

[GhostStalker27]

10388

[Brian GTS]

That's a very clever idea....very nice!

[Matt Dillon]

NICE! I take Sweet Tea with me Every time i go anywhere EXCEPT when i'm in the Viper! Lol! I'm one of those people though that just CANNOT drink Tea thru a Straw, don't know Why but i really don't drink anything thru a Straw (hence why they usually Don't have a lid on them & it's virtually impossible to drive the Viper Without a cup WITH a lid on it) :(

[Lemay88]

Just love it
Great engeneering.
Are you planning on selling you idea??

Ben

[ZZ SRT]

My plan is to make and sell these to the Viper community just for fun.

I bought supplies to make a batch of 12. I'll put them up for sale once they are ready and depending on feedback and demand, I'd be willing to make more for anyone who wants one! I won't get rich by any means, but I'm doing it more as a hobby and to provide something cool to the Viper family.

[MalingatorGTS]

That looks fantastic. 3D printing is the future! Now just make one that will hold my Note4 and stop it from flying out of the overhead netting and disappearing somewhere in the car lol! well done sir..well done!

[Propsail]

I assume it will work with a gen 1?

[Blue96GTS]

I'm pretty convinced I need one of these, sign me up. My wife is tired of hearing the story about the "Blonde with 2 hands" serving as a cup holder in the early Vipers...

[ZZ SRT]

Sounds good guys. Once I start to print out a few sets of parts for assembly I will start a list of who wants one to get demand.

As I stated, I can paint the logo and trim ring any color to match your viper exterior or something more generic like silver or gold.

I also am considering adding an option where you can put something custom on the plate below the viper symbol, for instance a member's initials, VOA member number, etc.


I'm pretty convinced I need one of these, sign me up. My wife is tired of hearing the story about the "Blonde with 2 hands" serving as a cup holder in the early Vipers...

LOL. My catless viper smells too bad for any girl to want a ride, including my wife :(


That looks fantastic. 3D printing is the future! Now just make one that will hold my Note4 and stop it from flying out of the overhead netting and disappearing somewhere in the car lol! well done sir..well done!

As I explained in my initial post, I think the beauty of this design is that I can continue to design add-ons that will fit the magnetic keyed setup I've created. I have a Note4 as well and considered designing a generic insert for MP3 holder, cell phone, etc, but didn't know how much interest that would garner since these are mostly weekend cruisers.


I assume it will work with a gen 1?

Good question. From looking at pictures, it appears to be the same geometry/layout on the center console. I'm sure some members on here could help me confirm.

[Sybil TF]

i'm pretty convinced i need one of these, sign me up. My wife is tired of hearing the story about the "blonde with 2 hands" serving as a cup holder in the early vipers...
lol...

[TT76Tony]

Good question. From looking at pictures, it appears to be the same geometry/layout on the center console. I'm sure some members on here could help me confirm.

Very cool design!
I think they are the same, when they're ready I'll buy one, test it on my gen 1 and be the guinea pig :-)

[Rook]

Very cool! Definitely would be interested in one!

[arizonajack]

I designed a cupholder to fit into the insert which can be stored in your center console compartment when you don't need a drink, but can be swapped in seconds.



There's a compartment in the center console?

Do I have one in my 96 RT/10?

Where is it and how do I open it?

[braunstein82]

Take my money!!! That a hell of alot better my setup now.

[Scott250r]

I can't believe you made this. Very cool craftsmanship

[vipertank]

Awesome. GTS blue please. :)

[Cudasub]

How much?

[5150VPR]

Damn good idea.

[Damn Yankee]

Dude, fill the passenger seat with a hot babe and ask her to hold your coffee.....done....

[TP_ GTS]

Pretty slick... So are you making and selling?

[RT SERPENT]

Impressive!

[Darth Menace]

I would love one (depending on price), but even the insert without the cup holder would be awesome. Looks way better than factory

[ZZ SRT]

Sorry guys for the delay.

I have all the hinges, etc to make a first batch of 12, I just have gotten busy this summer.

I can say I successfully tested the design on an 8 hour round trip to a big car show in the Wisconsin Dells with a bunch of hot rod buddies and it performed flawlessly, at all speeds :)

I have had a couple people ask recently, so I'll stop being lazy and start printing parts and assembling!

[Darth Menace]

Start printing prices for us too.

[braunstein82]

Curious about price but I'm in for one.

[ZZ SRT]

I was thinking $45 dollars + shipping to anywhere in the 48 states. Shipping should be super cheap based on the size/weight of the parts.

Honestly for less than that it's just not worth my time. Printing around 10 pieces per setup, hand sanding, hand painting them, assembly, parts, etc.

[ZZ SRT]

I also made this for my viper, and could easily replicate with pretty much any saying on it and would sell these for 20 bucks :)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/license%20plate%20project/20150404_080210_zpsbxca8nb3.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/license%20plate%20project/20150404_080210_zpsbxca8nb3.jpg.html)

Here's some examples of templates I can use to write anything. I designed this to fit the Gen 2 viper perfectly as most plate covers won't fit in the opening.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/license%20plate%20project/viper%20logo%20template_zpsti37m4f0.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/license%20plate%20project/viper%20logo%20template_zpsti37m4f0.jpg.html)

[Darth Menace]

I was thinking $45 dollars + shipping to anywhere in the 48 states. Shipping should be super cheap based on the size/weight of the parts.

Honestly for less than that it's just not worth my time. Printing around 10 pieces per setup, hand sanding, hand painting them, assembly, parts, etc.

I will take one as well. Not Chinese kid sweat shop prices but still a great deal and a breath of fresh air after seeing all the viper taxed parts flying around here. Add me to the list

[OnceBitten]

I'm definitely in for getting one of each of these. What would you be looking for on price for the plate cover?

EDIT: reading fail. I see the price now. Awesome deal. Definitely interested.

[Rook]

Definitely in for a cup holder!

[Snake]

How much $$$$?

[ZZ SRT]

Read up ^^^^^

[braunstein82]

When do you expect availability?

When and where do we send payment?

Can we select a different color other than red?

[ZZ SRT]

Well, I need to start printing a lot of parts and assembling them. I would say in the next couple weeks I can get a batch done.

As for color, I can maike the outlines/colors whatever (basic colors) to match the color of the car, or do something neutral like Silver or White if you prefer.

[elw98]

ZZ SRT, Not to hijack, but could you post a pic. of your wheels (brand/size?). I am looking for wheels for my RED genII , and yours looks great from what I can see.

thanks,
Ernie

[PRVT JET]

Well, I need to start printing a lot of parts and assembling them. I would say in the next couple weeks I can get a batch done.

As for color, I can maike the outlines/colors whatever (basic colors) to match the color of the car, or do something neutral like Silver or White if you prefer.

ZZ,
Don't forget me, I'll take cup holder and plate frame.

Isaac

[ZZ SRT]

ZZ SRT, Not to hijack, but could you post a pic. of your wheels (brand/size?). I am looking for wheels for my RED genII , and yours looks great from what I can see.

thanks,
Ernie

Forgestar F14's. 19/19 in Gloss Gunmetal.

http://i1344.photobucket.com/albums/p645/ZZ70SS/97%20Viper%20GTS/20150712_183025_zps7tlea2v4.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/97%20Viper%20GTS/20150712_183025_zps7tlea2v4.jpg.html)

[Snake]

I'll take one do you have paypal? Steel Gray

[ZZ SRT]

Yep, I will be doing Paypal for these.

I won't invoice or ask for payment until I have them made. I'm taking account of who is requesting them first so no need for a down payment to hold your spot.

[RT SERPENT]

I'll take one! Thanks for the creative efforts!

[TT76Tony]

Count me in for one.

[braunstein82]

What's the diameter of the hole the cup will go in?

[Darth Menace]

Make sure I am on the list for the nicest color (red)

My wife is so used to viper tax prices over the years that she had a leap of joy when I showed her pictures and told her the price. What a breath of fresh air

[CopterDoc]

I need one of these! And in GTS blue if there is an option

[SuperSaiks]

I would be interested in 4 license plate frames but with 4 screw holes and slightly different design.

[ZZ SRT]

I would be interested in 4 license plate frames but with 4 screw holes and slightly different design.

I can probably work with you on that depending what you mean by different design.

I have the flexibility to do a lot of different things within reason. The price will go up a little if I have to change my templates.

Here's a couple more.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/license%20plate%20project/viper%20rt10%20plate_zpsuije3q1q.png (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/license%20plate%20project/viper%20rt10%20plate_zpsuije3q1q.png.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/license%20plate%20project/viper%20gts%20license%20plate_zpsafgii8ex.png (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/license%20plate%20project/viper%20gts%20license%20plate_zpsafgii8ex.png.html )

[SARaptor]

I will take a cup holder. Please put me in line for a blue one.

[Darth Menace]

Better get making these cup holders unless you want a riot on your hands. :)

[Chris36608]

I'm in for one.

- Christopher

[Darth Menace]

This is making me want a 3D printer too, but so many questions unanswered about them. Are they in production yet?

[ZZ SRT]

Hey guys, parts are coming along. I really under-estimated how long it would take to make 10 sets of parts.

I pretty much have my printer running 24 hours a day right now to crank these out.

I also wasted about a week tweaking the design a little to address a couple small things I thought could be improved for strength/rigidity of the design.

Thanks for being patient!

[ZZ SRT]

Also, I was planning on shipping all 10 sets at once, but as long as this is taking, I may just start at the top of the list (first come, first serve) and ship them as I make each one.

I'll PM each of you for Paypal info when the time comes to ship and verify color.

[RT SERPENT]

No worries. No rush for me. I've waited 15 years, I'll take mine whenever you have them ready.
thanks!

[Darth Menace]

Also, I was planning on shipping all 10 sets at once, but as long as this is taking, I may just start at the top of the list (first come, first serve) and ship them as I make each one.

I'll PM each of you for Paypal info when the time comes to ship and verify color.

Thanks, I will take mine I previously mentioned, in the Viper red color :)

[RTTTTed]

My cup holders, because a short drive is 200 miles each way. Mostly I do several thousand mile trips and NEED my Coffee, especially in the mornings. Cupholders are removable for racing, leaving a couple small brackets stickng out 3/4"

12364

[Darth Menace]

My cup holders, because a short drive is 200 miles each way. Mostly I do several thousand mile trips and NEED my Coffee, especially in the mornings. Cupholders are removable for racing, leaving a couple small brackets stickng out 3/4"

12364

Did you screw that into your dash? I just couldn't do that

[Bad Brad]

Ready, and willing to purchase your cup holder, here is my e-mail bcb9112001@hotmail.com just let me know how much and where to send the check!!!!!!!!!!!

[Darth Menace]

He is currently pre-occupied making mine. Sorry man :)

[RT SERPENT]

Lol!

[97GTS B/W]

I like it!!

[ZZ SRT]

Hey guys, I put together a list to avoid any confusion on order priority based on this thread and what colors people will want.

If you are on this list, please PM the color you want and your Paypal email so I can invoice you when your turn comes up in the queue. I should have 5 cupholders done and ready to ship by the end of the week.

Thanks everyone for your interest and orders! Learning to make these efficiently and crank out all these parts has been interesting but I'm learning more and more everyday.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/Viper_Cupholder_list_10aug_zps31jnbuhw.png (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/Viper_Cupholder_list_10aug_zps31jnbuhw.png.html)

[Cudasub]

Cudasub will take a cup holder too do you take paypal for payment?

[ZZ SRT]

Cudasub will take a cup holder too do you take paypal for payment?

Yep, I will be doing Paypal. I'll take written checks sent to my house, but obviously will be waiting for it to clear before shipment.

[braunstein82]

Pm sent

[PRVT JET]

Pm sent

[ZZ SRT]

Thanks guys!

[Cudasub]

Okay just let me know when your ready. My work email is tthompson@mcg-ins.com.

[OnceBitten]

I have a black GTS with silver stripes so I will take a silver version. assuming its just the raised parts, I think it will look good. I'm still in for a license plate holder as well.

[ZZ SRT]

I have a black GTS with silver stripes so I will take a silver version. assuming its just the raised parts, I think it will look good. I'm still in for a license plate holder as well.

Yep, the color is just the border and the snake logo. PM me your Paypal info when you get a chance.

[Cudasub]

ZZ did you get my private messages? Thanks Cudasub

[edoggrc51]

I'll take one. :)

Curious, is yellow an option??

[Fatboy 18]

Did you screw that into your dash? I just couldn't do that

If you look closer they are screwed into the radio fixings behind the centre fasica ;)

[ZZ SRT]

ZZ did you get my private messages? Thanks Cudasub

Yep, got it! Thanks.


I'll take one. :)

Curious, is yellow an option??

Yep! I can do yellow.

[ZZ SRT]

Updated Cupholder List. Getting really close to being done with the first 5 or 6 and ready to ship.

12548

[drewsss]

Can you put me down for a yellow one?

Thanks,
Drew

[edoggrc51]

Info sent via PM. Thank again man!!!

[Cudasub]

Thanks ZZ, just invoice my PP account when ready. Cudasub

[Darth Menace]

Praying shipping isn't atrocious to Canada. Or else I have to be lame and get it shipped to my in-laws in the USA and wait hahaha., Oh the joys of being Canadian

[Darth Menace]

PS-My paypal info was sent. Thanks for the awesome new product

[ZZ SRT]

First 5 are ready to go. Had to overcome some challenges, but I hope they will only get easier from here as I learned some lessons and had a couple tolerance issues initially.

Here's some pictures I took of the first 5 completed.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/AD3A8430_zpsjabk7mz5.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/AD3A8430_zpsjabk7mz5.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/AD3A8431_zpsfgtwindb.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/AD3A8431_zpsfgtwindb.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/AD3A8434_zpslzdrkiqu.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/AD3A8434_zpslzdrkiqu.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/AD3A8432_zps8srwet4p.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/AD3A8432_zps8srwet4p.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/AD3A8436_zpsyyk83coe.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/AD3A8436_zpsyyk83coe.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/AD3A8424-Edit_zpstndhehmk.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/AD3A8424-Edit_zpstndhehmk.jpg.html)

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/Cupholder%20Project/AD3A8419-Edit_zps43yiux4f.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/Cupholder%20Project/AD3A8419-Edit_zps43yiux4f.jpg.html)

And lastly, here's one of the license plate covers I made.

http://i1344.photobucket.com/albums/p645/ZZ70SS/3D%20Printing/license%20plate%20project/AD3A8445_zps2fmmwnvm.jpg (http://s1344.photobucket.com/user/ZZ70SS/media/3D%20Printing/license%20plate%20project/AD3A8445_zps2fmmwnvm.jpg.html)

[Rook]

They look great! Looking forward to getting mine.

[PRVT JET]

Awesome work ZZ, can't wait to get mine.

Isaac

[edoggrc51]

Fantastic work!!

[Darth Menace]

I love looking at mine....I did PM you my paypal a day or two ago. Tell me if you have sent me an invoice

[Darth Menace]

Payment sent! And don't forget that on the customs sheet, it is a "gift" as my kids are giving it to me :) Thanks a lot! Happy to be part of a prototype release :)

[drewsss]

Great work...waiting patiently for mine! :dancingman:

[PRVT JET]

Got mine today, looks great! Thanks ZZ
12826

[ZZ SRT]

Thanks! They are not flawless but keep in mind I am making these in my office from scratch lol!

I hope to keep learning and slowly improve things here and there. Hope you enjoy it.

[drewsss]

So mine will be better than his, when I get it? LOL!

They already look great from PRVT JET's pic! :p

[Cudasub]

Hay ZZ let me know when your ready to be paid :)

[braunstein82]

You got vin001, it's gonna be with a fortune one day.

[braunstein82]

Just checked mail. :( maybe tomorrow

[Darth Menace]

I will assume Canada customs will have to take a couple weeks examining this to find out a way they can tax me on it. Looking forward to getting mine if it was shipped

[ZZ SRT]

I will assume Canada customs will have to take a couple weeks examining this to find out a way they can tax me on it. Looking forward to getting mine if it was shipped

Yep, it's on the way. All 5 left on the same day. Shipping was 25 bucks on yours :0

[Darth Menace]

Sorry, send me your paypal email and I will send you the difference? Shipping to Canada is such a rip off...


Also, it arrived with amazon prime tape, so I was confused when I opened it. How does that work? :)

PS- What a sexy thing! I haven't installed it yet, but I do love the look!

[braunstein82]

Got mine installed today. Did find out right away that I may have to come up with a way to lock it open for big cups. Otherwise looks awesome fits perfectly. Worth every penny.12872

[Darth Menace]

Zztop- message me

[Cudasub]

Anyone heard from ZZ, I'm down on his list to receive a cup holder but haven't read that he's responded to other messages?

[drewsss]

ZZ...is this project still a "go"?

I'm thirsty :)

[vipertank]

Same here, if you're making them in GTS blue, I'd like one. PM me if so ZZ.

[crackleking]

Nice job, but they sell after market cup holders that uses a Velcro system and snaps, and is a mesh bag that holds securely a bottle or two. So, the ash tray does not have to be modified.

[ZZ SRT]

Sorry guys, been buried at work and buried at home in house projects, and my own personal car projects.

As the weather is starting to turn, I'll have more time to start cranking these out and shipping them to everyone in order as long as each is still interested.


Nice job, but they sell after market cup holders that uses a Velcro system and snaps, and is a mesh bag that holds securely a bottle or two. So, the ash tray does not have to be modified.

Cool, you should buy one of those.

[CopterDoc]

I'm still in for a blue one!

[OnceBitten]

Just wanted to post in here how awesome this cup-holder is. Going from not having one at all has made this very much worth it. Good quality. Perfect fitment. Knock on wood, not a single issue with anything I put in it remaining secure and upright.

[Propsail]

Cool, you should buy one of those.[/QUOTE]

:smilielol:

[Cudasub]

I'm in and on the list. Sapphire Blue color if possible. Thanks, Cudasub

[Bad Brad]

zzSRT sign me up for a drink holder, Bad Brad bcb9112001@hotmail.com ready to get one today, let me know .

[drewsss]

ZZ...is this project still a "go"?

I'm thirsty :)

I'm (still) thirsty :)

[Bad Brad]

ZZZ SRT still waiting for mine , bcb9112001@hotmail.com Bad Brad Florida13784

[Rook]

I am still in for my holder and license plate frame when you get to them.

[ZZ SRT]

Hey guys, thanks for the interest.

I'm still planning on making more and shipping them out to everyone as I get time. Once again, sorry for the delay and thanks for everyone's patience!

[viperboon]

i like, i did sorta the same thing...

https://www.youtube.com/watch?v=QOyqK91IQB0
https://www.youtube.com/watch?v=QOyqK91IQB0


Clever Girl... love that line, of course, he is about to die before he admits it. fricken raptors...

[MM_RSI650]

Are these a go or have things just died?

[braunstein82]

They were made but only one run of them. I bought one but sold it after I sold my gen 2. Was awesome, looked and worked great. Might want to message the OP and try to talk him into making more.

[98RedGTS]

I want one as well if more are made.

[Scuderia47]

I started reading this thread from the beginning and just realized the original post was from 2015...I was ready to sign up to buy one. I'd buy one too, if available. I've been sticking my drinks in that holder thing above the small glovebox between the seats, which isn't the best solution.

[mackzilla]

Nice work, looks cooler than my solution.

[MM_RSI650]

Thanks for the heads up braunstein82. I PM'd ZZ to see if he could make some more. It is such a great idea and would be awesome if he could make a phone holder to go with it!

[Rook]

I was in for one originally but he stopped before I got mine. I would still be interested in one of he starts up again.

[stang1996]

Awesome. Sign me up

[stang1996]

Count me in

[PRVT JET]

I reached out to ZZ a few times with no luck, I have one of his cup holders and it works great!!!

Isaac

[nathansvt]

I reached out to ZZ a few times with no luck, I have one of his cup holders and it works great!!!

Isaac

I can probably replicate them if someone has a sample I can take measurements from.

[PRVT JET]

I'll see if I can grab the cup holder out of mine to measure, it's in the shop at the moment.

Isaac

[mackzilla]

You know if any of you guys aren't worried about the use of a hole saw i have a $10 solution for ya...

Lol

[98RedGTS]

You know if any of you guys aren't worried about the use of a hole saw i have a $10 solution for ya...

Lol

If you are talking about cutting a hole in the center armrest panel then, no thank you. Those cup holders look like crap. I want something that I can remove when not in use. If you have another solution, I'm all ears.

[ACR_Matt]

I've been working on an cup holder insert for the useless mesh netted area above the glovebox. Not the most convenient location but, it's out of the way, hidden and has worked well so far. Designing the final version to be able to hold various energy drinks secure while still accommodating larger beverages. I know that doesn't help the RT/10 guys but there's not an elegant solution for this honestly.

[mackzilla]

If you are talking about cutting a hole in the center armrest panel then, no thank you. Those cup holders look like crap. I want something that I can remove when not in use. If you have another solution, I'm all ears.

ah...I didnt think mine looked that bad.

[98RedGTS]

To each their own but a permanent mod like cutting a hole in the center armrest panel isn't an option for me, and I'd assume, most.

[MM_RSI650]

Hey nathansvt,
That would be awesome if you can make one from PRVT JET's holder! I think it is a much better solution than cutting up the console.

[mackzilla]

ah...I didnt think mine looked that bad.
My car came with it, sad for me i suppose. But it takes me to and from events and holds my sweet tea nicely. Check :)

[ZZ SRT]

I'm still alive!

I haven't been on here in a long time and have been crazy busy the last year with work and a new baby at home.

I still have parts sitting around and I've considered picking this project back up as I've learned a lot about 3D printing since I initially designed and made these. I could probably actually make some improvements to my original design as well.

[98RedGTS]

Well, hurry up already :-)

If you decide to do this please let me know. I need one.

[nathansvt]

Do it!

[Blue96GTS]

Yep, I'm still in need of one.

[Nightshade199]

I'd love one as well!

[ZZ SRT]

Hey guys,

I just purchased a new CNC setup so I will be looking into 3d printing more of the current design with some improvements as well as possibly making some billet aluminum versions! Thanks for everyone's patience! This is not something a do for a living obviously, but it still is a passion of mine to create products Viper owners desire to help out the community! Rest assured I will have a solution for all before next driving season!!!

[Darth Menace]

Hey, I am digging up an old thread. I bought one of these and they were cool. Unfortunately my stuff gets disrespected by my daughters and parts got lost. I have never learned how to do 3d print stuff, but my local library does it at cost. 36181

I am missing the black piece that goes over the hinge

[Darth Menace]

and I am missing 36182
and I am missing the trim piece that goes around the ash tray holder magnet thing

[MM_RSI650]

ZZ_SRT,
Glad to hear that you are back!
I would be super pumped to have one of these.
I think it is a great design/solution to the lack of a cup holder.

Looking forward to seeing them!

[ViperRyan]

Sorry guys for the delay.

I have all the hinges, etc to make a first batch of 12, I just have gotten busy this summer.

I can say I successfully tested the design on an 8 hour round trip to a big car show in the Wisconsin Dells with a bunch of hot rod buddies and it performed flawlessly, at all speeds :)

I have had a couple people ask recently, so I'll stop being lazy and start printing parts and assembling!

EDIT POST: I didn't see that this thread was from 2015. I see ZZ is replying. If you are up for, I'd be interested in one!

I'd like to have one of these as well! Would come in handy for car shows, and early morning cars and coffee events!

I am located up in WI, are you going to the VOA holiday party in two weeks?

I'll take one to match my color :) Steel Grey
36435

[ddlesk06]

nice work! Great post! Thanks for sharing progress!

[215MPH]

Yes I would be interested in one of these as well. Please keep us posted on your next batch.

[XFlyBoy]

I too would be interested in getting a cupholder when you make them again.

[Racngrn]

Count me in as well. Thanks

[Hssssss]

Does anyone have this file that they would be willing to share?

[Andrew2KRT10]

Very nice job. I'd order one if my nitrous switches weren't already set up in the coin holder.

[dmnhnters]

I'm still alive!

I haven't been on here in a long time and have been crazy busy the last year with work and a new baby at home.

I still have parts sitting around and I've considered picking this project back up as I've learned a lot about 3D printing since I initially designed and made these. I could probably actually make some improvements to my original design as well.

Can you make me one? I just bought a 2nd gen. Please PM me.

[Darth Menace]

I'm in a pickle. My daughters smashed mine around and temporarily broke it. I brought it inside to fix it and I forgot about it. Lost some small pieces in the process. Is anyone good at making some basic 3D copies for this fellow? I tried to learn but I honestly suck too bad

[Forumeddie2]

Since I have a cracked center console and a spare to replace later, I went with the hole saw idea. Doesn't look bad in my opinion.41624

[Lalmeida617]

Since I have a cracked center console and a spare to replace later, I went with the hole saw idea. Doesn't look bad in my opinion.41624

Looks great. BTW while u got your console out don’t forget to grease the e brake handle. It will prevent the ratchet from sticking on the first pull. (Mine does it)

[MH60M]

Looks great. BTW while u got your console out don’t forget to grease the e brake handle. It will prevent the ratchet from sticking on the first pull. (Mine does it)

Good call! That E-Brake handle issue sucks! Mine does it all the time!

[lane_viper]

So just wanted to share.

I have a C5 and have one of these in it (I know it's blasphemy to mention Corvette and Viper in the same sentence, please don't flame me too bad)

https://www.corvettemods.com/C5-C6-Corvette-1997-2013-Cup-Holder-Travel-Buddy--Single-and-Dual-Options-_p_5147.html

It looked like it would fit in the Viper with a little modification so I bought another one and trimed it to fit. Seems to work really well, and doesn't' require drilling or modifying the Viper at all. The floor mats are heavy enough to keep it in place.

41633

[MM_RSI650]

Hey Lane_Viper,
Thanks for sharing! I am going to buy one and see if it will work for me.
Looks like a nice fit from the pic.

[Fatboy 18]

What's the weight of this item? How stable is it on Track days?

[lane_viper]

What's the weight of this item? How stable is it on Track days?

I haven't tracked, but I have blazed some curvy TN back roads with a Yeti and it doesn't move.

It slides under the center console at the top and is held in place at the bottom by the edge of the floormats. If you have decent floormats that don't shift, you should have no problems.

[WHY U TRY]

Just wanted to bump this thread. I am itching to get one of these after reading this entire thread. I hope you can make another batch. I sent you a PM

[viperjody]

I was thinking $45 dollars + shipping to anywhere in the 48 states. Shipping should be super cheap based on the size/weight of the parts.

Honestly for less than that it's just not worth my time. Printing around 10 pieces per setup, hand sanding, hand painting them, assembly, parts, etc.
Are these still available?

[braunstein82]

I bought one of the first ones. Loved it. I'm into making 3d printed parts now. If the OP wants to send me the designs I would happily take over making them. Of course give him a cut.