Gen V catch can setup

[Simms]

What's everyone's thoughts? Needed for the track? Any good setups/kits out there?

[Jack B]

Pretty simple:

1. The passenger side is the exit engine air, use an air/oil separator. Use a flexible hose and put the separator in line with that hose.

2. The drivers side is the supply air from the air box, take the oem tube to a small catch can and cap the air box.. i fastened the catch can to the outside of the fender liner. In theory the intake air side should not send oil into the airbox, but in reality it does.

If you want pics, let me know,

[KB Viper]

will you please post pics, i'm interested in a catch can for mine too. thanks in advance.

[99RT10]

Pretty simple:

1. The passenger side is the exit engine air, use an air/oil separator. Use a flexible hose and put the separator in line with that hose.

2. The drivers side is the supply air from the air box, take the oem tube to a small catch can and cap the air box.. i fastened the catch can to the outside of the fender liner. In theory the intake air side should not send oil into the airbox, but in reality it does.

If you want pics, let me know,

Pics!!!!! Pics please!!!!! :D