FrgMstr
03-10-2015, 09:34 PM
Last year a guy from one of the Mopar magazines saw my car and reached out to me about writing an article about the mods done to it, and he asked for a complete list of mods done to the car, from rinky-dink to major. I did not have one so I sat down and started listing all the mods. All wrenches turned by myself except where indicated. I really need to get a lift.
My mod list is below, please post yours!
2008 Snakeskin Green Pearl Viper Convertible - Mods
Belanger Headers - JetHot Black from PartsRack.com
Cat Delete (Front Diffusers Removed)
2.5” Corsa Stainless Steel Catbacks with Random Tech Steel Cats fixed.
3”Straight Pipes for Racing (125dB)
Custom fabbed V-band quick change system on both exhausts (Rich’s Muffler)
Gen V Viper Composite Intake (with proper angle cut torque limiters)
Arrow Venom II ECU & Stock ECU with HPT Software
Underdrive Crank Pulley from PartsRack.com
Spec Super Twin Clutch (900lb torque) with Indexed Aluminum Flywheel (Vorshlag Install)
2010 ACR-X TR6060 Transmission (.80 5th) with Roush Racing Linkage Mods (Dealer Install)
RSI Upper and Lower Radiator Pipes with Silicone Connects
Viper Specialty Performance Stainless Steel Oil Cooler Lines
Doug Shelby Engineering Airbox Heat Shield
Autoform Roll Bar (All rear speakers removed, closeout panels fabbed and installed)
WoodHouse Motor Mounts (Tranny mount stock)
StopTech “ACR” Slotted Rotors from PartsRack (2ea Drilled spares)
EBC Red Pads
BMW E Brake Pads
StopTech Stainless Steel Brake Lines
RSI Emergency Brake Relocation Kit
Motion Control Systems Single Adjustment Suspension from Woodhouse
Eibach Springs (500/800) from Woodhouse
Gen V SideWinder II “Matte Black” Wheels (18/19)
5/16” Billet Spacers on backs from PartsRack
Michelin Pilot Super Sports (Stock Sizes)
Vorshlag Corner Balance
Cobb Tuning Alignment (-2.5 front/-1.7 rear)
Autoform TA Type Rear Spoiler
Arrow Carbon Fiber Closeout Panel
Custom fabbed Carbon Fiber Steering Wheel
Carbon Fiber Stone Guards PartsRack.com
Threaded Rivet Inserts on Side Sills (1/4-20)
Holes Drilled for Side Sill Removal
Quality Wires Spark Plug Wires with Socks
IPSCO Front Removable Tow Hook
Rear Tow Hook PartsRack.com
Seats Lowered in a total Redneck Fashion
Snake-Oyl Valence Guard (On at Purchase)
Roe Racing Rear Bumper Inserts (On at Purchase)
Side Sill Emblems changed to Black from PartsRack
Stereo from Earmark of Plano - Footwell Woofer Box
3M Clear Bra (On at Purchase)
LaminX Headlight / Fog Tint
Aluminum Sill Plates Powder Coated Black (Custom Powder Coaters)
9500ix Detector with BlendMount
CTEK Pigtail for Battery
Roe Racing Fire Extinguisher Mount
OZ Racing Challenge HLT 18” Track Wheels
Sears Platinum Battery (12/2015)
Safelite Mopar Windshield (08/2014)
Crank Damper (08/2014 - Dealer Install)
Driver Window Regulator (05/2014 - Dealer Install)
Driver Door Panel Replacement (06/2012 - Dealer Install)
Plugs (08/2014)
Mods Waiting:
Catch Can (purchased not installed)
Port and Polish Heads ??
Car made 564rwhp/544tq all OE with Corsa 2.5” Catbacks on Dynojet (picture)
Car Made 616rwhp/588tq on same Dynojet with SAE Correction last dyno (no picture) (622hp/STD)
http://kylebennett.com/files/hfpics/Roll%20Bar%20Install%2023.jpg
My mod list is below, please post yours!
2008 Snakeskin Green Pearl Viper Convertible - Mods
Belanger Headers - JetHot Black from PartsRack.com
Cat Delete (Front Diffusers Removed)
2.5” Corsa Stainless Steel Catbacks with Random Tech Steel Cats fixed.
3”Straight Pipes for Racing (125dB)
Custom fabbed V-band quick change system on both exhausts (Rich’s Muffler)
Gen V Viper Composite Intake (with proper angle cut torque limiters)
Arrow Venom II ECU & Stock ECU with HPT Software
Underdrive Crank Pulley from PartsRack.com
Spec Super Twin Clutch (900lb torque) with Indexed Aluminum Flywheel (Vorshlag Install)
2010 ACR-X TR6060 Transmission (.80 5th) with Roush Racing Linkage Mods (Dealer Install)
RSI Upper and Lower Radiator Pipes with Silicone Connects
Viper Specialty Performance Stainless Steel Oil Cooler Lines
Doug Shelby Engineering Airbox Heat Shield
Autoform Roll Bar (All rear speakers removed, closeout panels fabbed and installed)
WoodHouse Motor Mounts (Tranny mount stock)
StopTech “ACR” Slotted Rotors from PartsRack (2ea Drilled spares)
EBC Red Pads
BMW E Brake Pads
StopTech Stainless Steel Brake Lines
RSI Emergency Brake Relocation Kit
Motion Control Systems Single Adjustment Suspension from Woodhouse
Eibach Springs (500/800) from Woodhouse
Gen V SideWinder II “Matte Black” Wheels (18/19)
5/16” Billet Spacers on backs from PartsRack
Michelin Pilot Super Sports (Stock Sizes)
Vorshlag Corner Balance
Cobb Tuning Alignment (-2.5 front/-1.7 rear)
Autoform TA Type Rear Spoiler
Arrow Carbon Fiber Closeout Panel
Custom fabbed Carbon Fiber Steering Wheel
Carbon Fiber Stone Guards PartsRack.com
Threaded Rivet Inserts on Side Sills (1/4-20)
Holes Drilled for Side Sill Removal
Quality Wires Spark Plug Wires with Socks
IPSCO Front Removable Tow Hook
Rear Tow Hook PartsRack.com
Seats Lowered in a total Redneck Fashion
Snake-Oyl Valence Guard (On at Purchase)
Roe Racing Rear Bumper Inserts (On at Purchase)
Side Sill Emblems changed to Black from PartsRack
Stereo from Earmark of Plano - Footwell Woofer Box
3M Clear Bra (On at Purchase)
LaminX Headlight / Fog Tint
Aluminum Sill Plates Powder Coated Black (Custom Powder Coaters)
9500ix Detector with BlendMount
CTEK Pigtail for Battery
Roe Racing Fire Extinguisher Mount
OZ Racing Challenge HLT 18” Track Wheels
Sears Platinum Battery (12/2015)
Safelite Mopar Windshield (08/2014)
Crank Damper (08/2014 - Dealer Install)
Driver Window Regulator (05/2014 - Dealer Install)
Driver Door Panel Replacement (06/2012 - Dealer Install)
Plugs (08/2014)
Mods Waiting:
Catch Can (purchased not installed)
Port and Polish Heads ??
Car made 564rwhp/544tq all OE with Corsa 2.5” Catbacks on Dynojet (picture)
Car Made 616rwhp/588tq on same Dynojet with SAE Correction last dyno (no picture) (622hp/STD)
http://kylebennett.com/files/hfpics/Roll%20Bar%20Install%2023.jpg