Gen. II steering wheel

[10PISTNZ]

Will a Gen III or IV steering wheel fit on a Gen II?
Will the airbag work?

[99RT10]

I doubt it. I don 't think it has been tried. Most will put a Gen I steering wheel on a Gen II for tracking.

[10PISTNZ]

Don't track it much. This is for looks.
If it doesn't compromise the safety

[AZTVR]

There is a thread on another club's forum where some known, knowledgeable person says that the spline is the same but the connectors are different. Also some mention about it being 1/4 turn off due to "key guide".
I thought that I remembered a picture of it being done; but, I can't find it, so, maybe it was just a discussion about doing it. I agree that the Gen III wheel looks better.

[cubican]

Ok I have done it the gen 3 or 4 will work but the Gide key will have to be grin down on the steering wheel, a dremmel works great for that. The gen 2 wheel is keyed 90 deg off from the gen 3/4. Air bag connector work just fine..

[cubican]

You can also use the gen 2 wheel and put the gen 3-4 air bag on it it all fits

[Sybil TF]

Ok I have done it the gen 3 or 4 will work but the Gide key will have to be grin down on the steering wheel, a dremmel works great for that. The gen 2 wheel is keyed 90 deg off from the gen 3/4. Air bag connector work just fine..
Do you have any pics? Would love to see this.

[novi331]

This is an old thread, however did anyone confirm anything about the airbag? Thanks!