New Dyno Jet @ Bad Boyzz Garage

[BAD BOYZZ GARAGE]

We've just finished installing and are dialing in our new "Dyno Jet" 224 chassis dynamometer for BBG's new dyno center. Dyno installed, next step is to put finishing touches on our spectator area and install video equipment.. This will be a great addition to our operation to prove our performance products and service our customers needs! With all the support from Viper Nation we continue to grow! Give us a call anytime for your performance needs: Toddy@(916)505-9026 or Info@Badboyzzgarage.com

http://i1331.photobucket.com/albums/w587/BADBOYZZGARAGE1/BBG7035_zps28c01dbf.jpg (http://s1331.photobucket.com/user/BADBOYZZGARAGE1/media/BBG7035_zps28c01dbf.jpg.html)

Thanks,

BAD BOYZZ GARAGE
Toddy Gomez - Owner
1337 North Market Blvd. Ste 100
Sacramento, Ca. 95834
(916) 505-9026
Info@Badboyzzgarage.com

=DISTRIBUTORS OF POWER=:t1567:

[rw99]

Nice, Toddy!

[98intrigue]

Does your dyno allow a car to drive flat onto the platform and then raise the car in order to drive onto the rollers? If so, that is a fantastic option for low cars. Currently, my only option is finding a dyno that is in ground.

[BAD BOYZZ GARAGE]

Does your dyno allow a car to drive flat onto the platform and then raise the car in order to drive onto the rollers? If so, that is a fantastic option for low cars. Currently, my only option is finding a dyno that is in ground.

That would be trick, but our Dyno-Jet ramp raises and lowers from the front using hydraulic rams. The ramps approach angle can accommodate lowered Vipers well as you can see by the Viper Coupe pictured. For lowered ACR's we use a pair of race ramps to ensure ground clearance.

Thnx,

Bad Boyzz Garage
Toddy

[Glen97]

Looking good Todd! Time for a Dyno day!
Glen

[72hemi]

I agree with Glen! When is the dyno day?

[Revolution]

Great addition Toddy!

[cashcorn]

Yes! We need to see some dyno #'s with genv's & shorties..

[TooBlue]

Looks good Toddy...!!!

[eric@thompsonracing.us]

Congrats on the new tool!

[BAD BOYZZ GARAGE]

Congrats on the new tool!

Thnx Dude!!