Need a ACR Extreme Aero front splitter winglet

[583]

Hello,
I'm hoping someone out there upgraded their ACR Extreme front splitter winglets to carbon fiber and is willing to part with the stock take offs. I actually only need the driver's side. Attached is a pic of my passenger side. Thanks!
-Paul

[pMak26]

I am also looking for a set of these to buy or to borrow and return after I model them. :)

[jwalk]

I 3D printed a small batch of those. I will post pictures in a few hours. The texture is slightly different but not too far off. Plus you only see the side.

[RT SERPENT]

I could use new ones as well. A bit of a wearable item IMO.

[jrubin80]

If you find a pair reasonably priced I’ll split it and take the passenger side one. Or if we can find a nice 3D set I’ll split.

[583]

Not too worried about the texture as the front edge of the splitter extension is different as well. Is it possible to forward the 3D cad model so I can print myself?
Thanks,
Paul

[jwalk]

527575275852759

[583]

Those look awesome. Is it possible to forward the 3D cad model so I can print myself or are you willing to sell a set?

[jwalk]

I will sell them for $155 including shipping per set. PM me. Paypal

[bmxbandit]

I 3D printed a small batch of those. I will post pictures in a few hours. The texture is slightly different but not too far off. Plus you only see the side.

jwalk Any chance you are able to 3D print the TA1 front splitter? I'm not wanting carbon and that is all I can seem to find are carbon options.

https://theviperstore.com/images/Spitter1_Viper571.jpg

[jwalk]

jwalk Any chance you are able to 3D print the TA1 front splitter? I'm not wanting carbon and that is all I can seem to find are carbon options.

https://theviperstore.com/images/Spitter1_Viper571.jpg

No, I typically dont do 3D printing but this was something I needed for my ACR-E.

[Arizona Vipers]

Nice work Jwalk!

[bmxbandit]

No, I typically dont do 3D printing but this was something I needed for my ACR-E.

no worries! thanks for the reply! :cool:

[BJG32]

Doug Shelby sells these in a carbon fiber version.

https://www.dougshelbyengineering.com/collections/gen-5/products/gen-v-acr-carbon-fiber-splitter-winglets