ACR Decals

[Tay]

Does anyone know where to find ACR side decals? Original is preferred but replica is fine.

[ACRSNK]

I wood call Woodhouse, or Jon B. I’m sure they can help.

[ViperGeorge]

The ACR decal is 9 1/4" wide from the left edge of the flag to the right most edge of the R. It is 1 1/4" high from bottom of the R to the top of the R. The C in ACR is 15/16" high.

The TA decal is 8 1/2" from the left most ledge of the flag to the right most part of the ACR.: It is 1 1/8" high measure from the bottom of the A to the top of the T.

Replicas available from lasigns@reagan.com

[Tay]

I wood call Woodhouse, or Jon B. I’m sure they can help.

Will do thanks.

- - - Updated - - -


The ACR decal is 9 1/4" wide from the left edge of the flag to the right most edge of the R. It is 1 1/4" high from bottom of the R to the top of the R. The C in ACR is 15/16" high.

The TA decal is 8 1/2" from the left most ledge of the flag to the right most part of the ACR.: It is 1 1/8" high measure from the bottom of the A to the top of the T.

Replicas available from lasigns@reagan.com

Thanks a lot ViperGeorge.

[Black Pearl]

Check with Jon B at Parts Rack www.ViperPartsRack.com

[Tay]

Check with Jon B at Parts Rack www.ViperPartsRack.com

Will do. Thanks.

[Tay]

Can anyone tell me the width of the ACR fender decal? lasigns has the graphic. I just need to tell her the size.

[ViperGeorge]

Can anyone tell me the width of the ACR fender decal? lasigns has the graphic. I just need to tell her the size.

See my previous post!

[Tay]

See my previous post!

Whoops! I totally forgot you provided dimensions earlier.

Thanks ViperGeorge.

[Martin]

What happened to the decals? I'm asking because I'm wondering what might happen when I have the PPF removed from the car in a few years. I've heard stories of installers now cutting the PPF around the decals because of issues with pulling the decals off the car when un-installing the film. I'm hoping it's a non issue, but if it's a real issue, I'll get some decals in storage just in case.

[boost everything]

What happened to the decals? I'm asking because I'm wondering what might happen when I have the PPF removed from the car in a few years. I've heard stories of installers now cutting the PPF around the decals because of issues with pulling the decals off the car when un-installing the film. I'm hoping it's a non issue, but if it's a real issue, I'll get some decals in storage just in case.

I've had Suntek PPF removed twice that were over my ACR decals and they were fine but of course I've also heard about decals coming off with PPF on occasion.

[Martin]

That's good news - I have Suntek on everything. I was thinking about having them install around them, but they felt that it wasn't going to be a problem. Keeping my fingers crossed....

[boost everything]

The ACR decal is 9 1/4" wide from the left edge of the flag to the right most edge of the R. It is 1 1/4" high from bottom of the R to the top of the R. The C in ACR is 15/16" high.

The TA decal is 8 1/2" from the left most ledge of the flag to the right most part of the ACR.: It is 1 1/8" high measure from the bottom of the A to the top of the T.

Replicas available from lasigns@reagan.com

Because of this post I ended up ordering mine from lasigns@reagan.com and I am very pleased with them. This is the pic I was sent and this is exactly what they look like.

52221

[Martin]

Those do look nice. Do you have a side-by-side next to the decals on the car?

I'm hoping they're all the same, because if they already have the template created for them, I'll bet they get a bunch of orders. I'm still a tiny bit worried that mine will come off with the PPF, so it would be worth it just to get an extra set.

[boost everything]

Those do look nice. Do you have a side-by-side next to the decals on the car?

I'm hoping they're all the same, because if they already have the template created for them, I'll bet they get a bunch of orders. I'm still a tiny bit worried that mine will come off with the PPF, so it would be worth it just to get an extra set.

I dont have a side by side next to an oem decal but I'll try to make that happen with another ACR in the area

[boost everything]

Those do look nice. Do you have a side-by-side next to the decals on the car?

I'm hoping they're all the same, because if they already have the template created for them, I'll bet they get a bunch of orders. I'm still a tiny bit worried that mine will come off with the PPF, so it would be worth it just to get an extra set.


I dont have a side by side next to an oem decal but I'll try to make that happen with another ACR in the area

Crazy enough I found an ACR that was for sale at a dealership in my area that I was going to use for the side by side and to make sure my decals got put on in the correct spot and it turns out that ACR got stolen?