Can someone please grab pics of wheel well liner bolts

[Lawineer]

Edit: Never mind. Found the two screws. They go up, near the forward LCA mounting point for anyone who has this problem down the road, lol.
Just missing one screw and can’t seem to find it.


I took my wheel well liners out a while ago to install my coilovers. I decided I wanted to put about 100 miles on it and check them so I didn’t put the liners back in, and now I can’t remember where the screws go and where the bolts go. If someone could take a picture so I can see where the toes bolts and the hex head screws go I would appreciate it.

Really just the hex screws because the rest are obviously the torx.

Thanks!

[Arizona Vipers]

Edit: Never mind. Found the two screws. They go up, near the forward LCA mounting point for anyone who has this problem down the road, lol.
Just missing one screw and can’t seem to find it.


I took my wheel well liners out a while ago to install my coilovers. I decided I wanted to put about 100 miles on it and check them so I didn’t put the liners back in, and now I can’t remember where the screws go and where the bolts go. If someone could take a picture so I can see where the toes bolts and the hex head screws go I would appreciate it.

Really just the hex screws because the rest are obviously the torx.

Thanks!

hehe, I'm no expert wrencher, that's why I always take tons of pics and video of everything I take apart or I know I'm F'd! LOL!

[Lawineer]

hehe, I'm no expert wrencher, that's why I always take tons of pics and video of everything I take apart or I know I'm F'd! LOL!

So funny story.

When I switched go the other side I found that I circled with paint pen on the liner where all the screws went. I have absolutely zero recollection of doing this. That was a solid 45min of my life I'll never get back.

That one screw is really well hidden when there isn't a bolt head to spot it with, haha.

I distinctly recall, as a kid, laughing at my parents when they had brain farts like this. :(

[98intrigue]

In case anyone anyone has a similar question in the future, I have some pictures and details in the thread below.

https://driveviper.com/forums/threads/13792-Instructions-on-how-to-remove-OEM-shocks

[Arizona Vipers]

So funny story.

When I switched go the other side I found that I circled with paint pen on the liner where all the screws went. I have absolutely zero recollection of doing this. That was a solid 45min of my life I'll never get back.

That one screw is really well hidden when there isn't a bolt head to spot it with, haha.

I distinctly recall, as a kid, laughing at my parents when they had brain farts like this. :(

LOL!