Front inner fender material

[outnumbered]

Is it fiberglass on the Gen V? I've never liked that it was splotchy looking, and wonder if it would be accepting to fiberglass black stain.

[J TNT]

Eastwood has a product to make it look new and black again , but Ive never tried it ......
The reviews look promising........

[outnumbered]

I will check that out. Thanks.

[stradman]

Eastwood has a product to make it look new and black again , but Ive never tried it ......
The reviews look promising........

Eastwoods plastic resurfacer. Works a treat. I did mine. Works beautifully.

[outnumbered]

Eastwoods plastic resurfacer. Works a treat. I did mine. Works beautifully.

Just watched the video and ordered a can. Thanks.

[dsp300c]

Is it fiberglass on the Gen V? I've never liked that it was splotchy looking, and wonder if it would be accepting to fiberglass black stain.

What part are you talking about? all the faded black areas in the engine bay?

[outnumbered]

What part are you talking about? all the faded black areas in the engine bay?

No, the area directly behind and in front of the front tire.

[sadil]

Those are some expensive areas, it’s like $600 per side for the inner fender liners on the front. I looked into it after mine had taken a beating at the track. As for material, It looks like it’s fiberglass from the way it “tore”. It is a material that holds up okay And looks good otherwise. Sound proofing is good.

[Arizona Vipers]

Those are some expensive areas, it’s like $600 per side for the inner fender liners on the front. I looked into it after mine had taken a beating at the track. As for material, It looks like it’s fiberglass from the way it “tore”. It is a material that holds up okay And looks good otherwise. Sound proofing is good.

Did you burn holes in yours? LOL. Firs time I tracked mine hard I had holes burned through both sides. Same with my stock ACR.

[sadil]

I’m on your tire setup! I probabaly have much more movement all over with the softer TA suspension. The 325 Pirelli are a blast and yes, holes burned right through

[sharmut]

Same problem with my ACR-E with holes while using 18x11 R7 315x30x18. Just replaced the driver side for other reasons, last i check the passanger side was not available.

[ViperGeorge]

Same problem with my ACR-E with holes while using 18x11 R7 315x30x18. Just replaced the driver side for other reasons, last i check the passanger side was not available.

Check again, I just got the left and right sides. I will probably save them for a while as if I change them the tire will just wear a hole in them again.

[Arizona Vipers]

I’m on your tire setup! I probabaly have much more movement all over with the softer TA suspension. The 325 Pirelli are a blast and yes, holes burned right through

lmao awesome.