Few mods many pics

[Loud]

I barely got a chance to drive the car since I picked it up late last year, but did do some cosmetic changes and a tune. So, here goes;

The car had the full ARH headers/exhaust package, and coming from a straight piped GTS, it was just not loud enough for me. I did not want to go catless in fear of the smell, so cut the mufflers out. The sound was unbearable. I drove the car for 20 miles and had enough. Cold start was just extremely annoying. Lucky for me, Lou Belanger is in the valley, so called him, went over to his shop, had him weld me the required pipework to his muffler and was out in under two hours. He is a true craftsman and has extreme attention to detail. It was fun watching him work. Big difference with the Belangers on, personally, I could go louder, but not gonna mess with it now.

- Belanger Mufflers

ARH Muffler:
https://i.imgur.com/CsIdXtY.jpg?1

Belanger short muffler vs ARH muffler
https://i.imgur.com/p8X1pZf.jpg?1

Belanger Muffler:
https://i.imgur.com/odOSETE.jpg?1


Ron [outnumbered] had the full front PPF on the car, but having driven it in rain right after, there was some pealing and there were some exposed areas that I was not comfortable with knowing how rock chip happy AZ is. Also given how much I drive, figured it would be best to protect this beautiful orange color.

- Removed old PPF from full hood, bumper, mirrors, side rockers
- Full paint correction
- Full body PPF – Suntek
- Ceramic coating, including glass and wheels


https://i.imgur.com/eikyloR.jpg?1

https://i.imgur.com/bbdPTCs.jpg?1

https://i.imgur.com/USqNkXP.jpg?1

https://i.imgur.com/0OBeytI.jpg?1

https://i.imgur.com/aaQUEz5.jpg?1

PPF
https://i.imgur.com/pQOJ9EM.jpg?1

Both cars getting some TLC
https://i.imgur.com/QTc7N52.jpg?1

Ceramic coating
https://i.imgur.com/mcixzqa.jpg?1

[Loud]

While doing the PPF, I also changed a couple things to have some contrast.

- Tinted headlights
- Tinted side markers
- Tinted rear lights
- Tinted rear turn lights
- Windshield tinted 80% ceramic film
- Powder coated gas cap
- Powder coated exhaust surround

Powder coated gas cap
https://i.imgur.com/3pVV5h3.jpg?1

Completed pics
https://i.imgur.com/CRMN7Cq.jpg?1

https://i.imgur.com/hG5U6y3.jpg?1

https://i.imgur.com/Kllm8uk.jpg?1

Called Laurelle at xTREME ordered the CF vents. I love how this changed the look. So glad I did this. No more silly plastic.

https://i.imgur.com/cKDEMa7.jpg?1

https://i.imgur.com/9wARtYD.jpg?1

https://i.imgur.com/hMZwVmX.jpg?1

Andy [Anatoly V] produces a smaller version of diffusers which in my opinion suit the TA ducktail wing better without overdoing it. So, I added those and love them.

https://i.imgur.com/hVyfpv4.jpg?2

https://i.imgur.com/2dcClIx.jpg?1

https://i.imgur.com/5Qsf1RL.jpg?1

Also added some custom orange seat belts to match the car.
https://i.imgur.com/b6Q7etM.jpg?1

[Loud]

Next up was to get the car tuned for 91 octane. The tune from Vengeance was for 93 octane and I had a feeling there was more in it. So, rather than having Vengeance send me a file for 91, I got talking to Torrie for any additional magic he could do. Bought the HP tuners MPVI2 interface and credits, did some data logging and sent files to Torrie. The Vengeance racing tune was 648 RWHP and in the back of my mind, I was hoping for ~30 RWHP more with the tune [so it could be closer to my license plate (still the goal)].

Torrie works with Black Market Racing here in Phoenix to remote tune cars, so made the appointment. To my surprise, the first pull here in AZ was a mere 622 RWHP. 91 octane, ugh, but I had my fingers crossed as I kept data logging and sending files to Torrie.

We did 6 pulls and with each file we saw more power. With my primary goal of good street manners and driving year round including AZ summer, he felt it was a perfect balance and safe setting at 666.72 RWHP and 620 lb-ft. That is where we ended.

https://i.imgur.com/giZcHwE.jpg?1

Dyno Video

https://www.youtube.com/watch?v=q7RyvzrJpqQ

I am very happy with the tune and customer service from Torrie. The driving characteristic has improved ten fold, throttle response is better, leaving from a stop is much smoother and the RPMs drop quickly too vs being lazy. I am going to enjoy the car as-is for a while before exploring options for more power.

[Loud]

As I started drafting this post this am, I remembered I wanted to add spacers. Just cannot stand how tucked in the front wheels are. Car is already lowered with IPSCO lowering caps. Called Mark at IPSCO and ordered the .420 hub centric spacers and extended lugs. Cannot wait for those to get here on Saturday.

I want to do something different for the wheels, but not yet sure what route I want to take. For now, the SWIIs will do.

A few more pics and a walk-around video to end the post.
https://i.imgur.com/wVAav8G.jpg?1
https://i.imgur.com/w4B7i38.jpg?1
https://i.imgur.com/5IJJ4vi.jpg?1
https://i.imgur.com/01xj8T9.jpg?1
https://i.imgur.com/kBzZbUI.jpg?1

Walkaround video

https://www.youtube.com/watch?v=o3ZyQR9WlFo

That is a lot of orange.

A

[zee]

Car looks SICK! The tinted headlights looks mean AF. Don’t think I’ve ever seen that on the Orange TA.

[Jts2005]

Very nice, what did you use to tint the headlights?

[outnumbered]

Anil, the car looks fantastic!!! However, take it from someone that has had 6 sets of wheels between three Gen V's. The SWII's are just about perfection. Don't go chasing a set in an attempt to look better than what you have. Outside of being different (which the Viper already is) you will waste time and money. Ultimately you would likely return to the Sidewinders anyway!

P.S., I told you Torrie was the man......and doing it with 91 octane!

[ACRSNK]

That is one beautiful piece you have there

[ViperJon]

Damn.... that's perfection. Well done.

[GM_500]

Looks sick. Where'd you get the door sills?

[Cheme1985]

Lawd have mercy I think I just caught a case of the vapors. *Fans self*

That's a gorgeous car.

[Hawk]

The car looks great. It looks like you left the stock cats on it. I would highly recommend changing them to Jon B’s high flow cats. They do not raise the sound to an obnoxious level (gives it a beefier sound) and they do make the car run cooler. It completely eliminates the heat from the rockers and cabin
https://driveviper.com/forums/threads/23832-High-flow-cats-from-JonB-finally-installed-Should-have-done-this-long-ago

[BSLSK]

That paint looks like it's wet... absolutely stunning!!

[ViperNC]

I barely got a chance to drive the car since I picked it up late last year, but did do some cosmetic changes and a tune...

Time to fix that problem.... Viper looks great, but looks even better in motion! Go have fun!

[outnumbered]

The car looks great. It looks like you left the stock cats on it. I would highly recommend changing them to Jon B’s high flow cats. They do not raise the sound to an obnoxious level (gives it a beefier sound) and they do make the car run cooler. It completely eliminates the heat from the rockers and cabin
https://driveviper.com/forums/threads/23832-High-flow-cats-from-JonB-finally-installed-Should-have-done-this-long-ago

It actually has the ARH cats.

[Hawk]

Could you post the contact info for the rear diffuser
Thanks
Dennis

[Special Ed]

Looks sick. Where'd you get the door sills?

The door sills are Xtreme Supercars. (561)762-3118. I have them on my car and they are perfection.

[Martyb]

Car looks and sounds even better in person, well done Anil!

[Sniper]

How dark did you go on headlight tint?
And could you tell me what it cost to do wrap, paint correction, and ceramic coating?

[chris_lee]

I agree on the tucked in wheels. I hate that on mine... On those IPSCO .420 hub centric spacers and extended lugs do you just do the front? The site does not specify but I assume it's for the front only right? The rear never bothered me nearly as much as the front.
Car looks great!

[Arizona Vipers]

Gorgeous and badass dude!!!!

[Loud]

Anil, the car looks fantastic!!! However, take it from someone that has had 6 sets of wheels between three Gen V's. The SWII's are just about perfection. Don't go chasing a set in an attempt to look better than what you have. Outside of being different (which the Viper already is) you will waste time and money. Ultimately you would likely return to the Sidewinders anyway!

P.S., I told you Torrie was the man......and doing it with 91 octane!

Coming from the wheel man himself, I will go with what you said. Yes, you did point me in the right direction with Torrie :)

[Loud]

Looks sick. Where'd you get the door sills?

Ron purchased them from xTREME. Same place I got the CF vents.


The car looks great. It looks like you left the stock cats on it. I would highly recommend changing them to Jon B’s high flow cats. They do not raise the sound to an obnoxious level (gives it a beefier sound) and they do make the car run cooler. It completely eliminates the heat from the rockers and cabin
https://driveviper.com/forums/threads/23832-High-flow-cats-from-JonB-finally-installed-Should-have-done-this-long-ago

Car has the ARH full exhaust system, which come with the high flow ARH cats. I only changed the muffler.



Could you post the contact info for the rear diffuser
Thanks
Dennis

Dennis, I will DM you Andy's contact.


How dark did you go on headlight tint?
And could you tell me what it cost to do wrap, paint correction, and ceramic coating?

Don't recall exactly. But just enough to not have issues with night driving. I used the same film on the side and rear markers, but you will notice those don't appear as dark as the headlights.

~9k, which included removing the existing film in front. 10yr warranty on PPF, 5 years on ceramic.



I agree on the tucked in wheels. I hate that on mine... On those IPSCO .420 hub centric spacers and extended lugs do you just do the front? The site does not specify but I assume it's for the front only right? The rear never bothered me nearly as much as the front.
Car looks great!

I ordered both front and rear, Mark thought that would be best. But if the rears hang out too much or rub, I can always return them.


Very nice, what did you use to tint the headlights?

Same Suntek PPF film, or could've been different. Not sure.

[Steve M]

Looks like Vengeance left a lot on the table with their tune. I'm assuming they were responsible for the heads/cam setup as well?

[outnumbered]

Looks like Vengeance left a lot on the table with their tune. I'm assuming they were responsible for the heads/cam setup as well?

They did, and admittedly even though they have arguably the fastest 1/4 mile Viper in existence, their experience tuning a H/C car is nowhere near the level of Torrie. I had always planned to have Torrie tune if I had kept it. However, I will tell you their level quality, and overall attention to detail is second to none, period.

[Loud]

They did, and admittedly even though they have arguably the fastest 1/4 mile Viper in existence, their experience tuning a H/C car is nowhere near the level of Torrie. I had always planned to have Torrie tune if I had kept it. However, I will tell you their level quality, and overall attention to detail is second to none, period.

Agree with Ron. Overall quality from Vengeance is top notch.

[Loud]

Anil, the car looks fantastic!!! However, take it from someone that has had 6 sets of wheels between three Gen V's. The SWII's are just about perfection. Don't go chasing a set in an attempt to look better than what you have. Outside of being different (which the Viper already is) you will waste time and money. Ultimately you would likely return to the Sidewinders anyway!

P.S., I told you Torrie was the man......and doing it with 91 octane!

Ron, is your 19" SW front conversion done? May be I should do that too ;). Pics please if done.

[outnumbered]

Ron, is your 19" SW front conversion done? May be I should do that too ;). Pics please if done.

I was actually talked out of doing that by a wise soul here on the forum. As you know, I wasn't a fan of the really small looking 18" up front. However, looking back at all my pics, along with the pics of other cars, going with the 19" up front really takes away from the natural rake stance of the Viper. Having the lowering caps up front helps, and putting the Toyo R888's helps even more. So I have decided to leave well enough alone. I will either sell the two rears that I have, or I will put drag radials on them for the track.

[Quasar Z]

Wow! That is a beautiful car Anil. I look forward to seeing it at some point in the future.

[1ststrike]

Surprised you didn't muffler delete!! Hope you are doing well.

[Loud]

Surprised you didn't muffler delete!! Hope you are doing well.

Haha, I was equally surprised, Mark. Perhaps I’m getting old.

Doing well brother, hope you guys are too.

A

[Whitey]

Well done. The car looks and sound great.

[98intrigue]

Great additions to an already well built car. Let's hear some WOT pulls. Any desire to see what your 60-130 times are?

[ViperNC]

I was actually talked out of doing that by a wise soul here on the forum. As you know, I wasn't a fan of the really small looking 18" up front. However, looking back at all my pics, along with the pics of other cars, going with the 19" up front really takes away from the natural rake stance of the Viper. Having the lowering caps up front helps, and putting the Toyo R888's helps even more. So I have decided to leave well enough alone. I will either sell the two rears that I have, or I will put drag radials on them for the track.

Wise.... I don't believe anyone has accused me of that before! :lol2:

[Whiskey]

Car loooks awesome! Great power too. Can you PM me more about your heads/cam and cost.

[Scott_in_fl]

Car looks great, and I agree with Ron that the 18" front is the natural fit for this car. Always looks so good in photos with a proper sized tire on there, whereas the 19" looks a bit strange struggling to get a rubber band tire on there. I say stick with the 18/19 setup. I also agree that finding a better looking wheel than the SWII is tough. However, the Forgeline GTD1 is terrific, and I see that BC Forged had a great looking Viper wheel recently.

[Loud]

Great additions to an already well built car. Let's hear some WOT pulls. Any desire to see what your 60-130 times are?

Soon. Didn't really think about knowing what the 60-130 times would be, but you have me interested now. Will look into that.

[Loud]

Car loooks awesome! Great power too. Can you PM me more about your heads/cam and cost.

Will do.


Car looks great, and I agree with Ron that the 18" front is the natural fit for this car. Always looks so good in photos with a proper sized tire on there, whereas the 19" looks a bit strange struggling to get a rubber band tire on there. I say stick with the 18/19 setup. I also agree that finding a better looking wheel than the SWII is tough. However, the Forgeline GTD1 is terrific, and I see that BC Forged had a great looking Viper wheel recently.

I think you guys have a point here. I will stick to the 18/19 config. There are a couple HRE's I like too. However, with the spacers coming in tomorrow, and not having the tucked in look, I may be good with the SWIIs.

[outnumbered]

19" up front.......Just not the same on the Gen V.

[Oh Three Z]

Perfection... well done!!

Please post pics of the fronts after you install the spacers

[Loud]

Great mods! Your TA and my LP640 put down the same whp. :icon_devil:

Nice!!

[98intrigue]

Soon. Didn't really think about knowing what the 60-130 times would be, but you have me interested now. Will look into that.

When you do, post your results here: https://driveviper.com/forums/threads/8162-Gen-5-Vbox-Data-60-130-mph-times

[Loud]

Perfection... well done!!

Please post pics of the fronts after you install the spacers

.420 front and rear.

Before:
https://i.imgur.com/V5UOeY3.jpg?1

After
https://i.imgur.com/qXzYtz5.jpg?1

https://i.imgur.com/Vl1wQ4r.jpg?1

https://i.imgur.com/EA8sbXz.jpg?1

https://i.imgur.com/E68sa8I.jpg?1

[Scott_in_fl]

19" up front.......Just not the same on the Gen V.

Yeah, the 18's are it!

[Simms]

Nice details!

[chris_lee]

Spacers look great... will have to do this now. How did the rears end up looking?

[Loud]

Spacers look great... will have to do this now. How did the rears end up looking?

Rears are perfect. The fronts seem like they could come out some more, but I'm not going to mess with it anymore.