2001 Gen II Torque specs pressure plate

[clarkcr]

Hello, can or has someone posted a toque sheet for this generation? Specifically, I need the pressure plate torque specs.

Many thanks

C

[dave6666]

It's in the factory service manual. Do you have one?

[tagoo]

The manual for a 1998 says 30 N.m or 270 in. lbs which i believe is the same as 22.5 ft. lbs. I think the 2001 would be the same.

Also, don't trust the alignment tool to center the clutch perfectly. Check to see that the clutch is centered relative to the pressure plate by feeling the distance from the edge of the clutch disk to the edge of the pressure plate face. I had a horrible time with not getting the transmission shaft to align with the pilot bearing until I used the "finger" method.

[BLRDViper]

From the 2001 Manual.
BLRD3810238103

[clarkcr]

Wow. I am a member of many forums, but ALL these responses are hands down the best effort and most worthwhile help I've ever received. Thank you so much. I look forward to using you guys again.

Chris

[Bill W]

You can find service manuals for your Viper through our vendors. Good to have.