Clutch ratio Gen2

[Eskedal]

I think my clutch pedal is to long, any recommendation for getting a shorter pedal in my car?

I can not change gear fast enough because of this problem :)

[Steve-Indy]

You have not told us the year and model of your Viper...it matters !!

For instance, you reference a "Gen2"...which starts with the 1996 GTS (only) and continues through all other Vipers through 2002.

If you have one of the above cars, you could look at the "Clutch Pedal Modification Kit, 96-02 Viper - Roe Racing"...which specifically DOES NOT FIT a 1996 R/T 10 Viper which some call a Gen 1.5 Viper according to the Roe Racing website.

[dave6666]

I think my clutch pedal is to long, any recommendation for getting a shorter pedal in my car?

I can not change gear fast enough because of this problem :)

Aside from the pedal throw kit that Steve mentioned above, some other applicable responses:

1) Short throw shifter.

2) You expectations are too high. A viper is not a Koenigsegg.

3) If you have a later year car move the pedals close as they are adjustable.

Lastly, if you do the pedal kit or the short throw shifter be aware that required force to operate the pedal or shifter is the exact opposite of the movement improvement. In other words, if the ratio is 25% less travel, the required force to make said travel is 25% more. That may or may not matter but you should be aware of it.

[Eskedal]

It is a 97 Gts.

Dave6666
Yes I know.

I think I would make a new part with some another holes like the one in picture.


37838