Front splitter bolt part needed

[ek1]

Got a bit too aggressive with curbs at VIR :) Need new bolts and an advice on how to undo the stripped ones
35453

35454

Here is how it used to look:

35457

I have looked at the diagram located at https://www.moparpartsoverstock.com/showAssembly.aspx?ukey_assembly=1987376&ukey_make=1095&ukey_model=15988&modelYear=2016&ukey_category=22687&ukey_driveLine=11609&ukey_trimLevel=27147 and I _THINK_ that what I need is #4 (SCREW. Pan Head. M6X1.00X22.00.), pictured here: https://www.moparpartsoverstock.com/p/Dodge_2016_Viper-SRT-ACR-Coupe-84L-V10-SFI--6-Speed-TR6060-Manual/SCREW-Pan-Head-M6X100X2200/10114419/06508387AA.html

Can someone please confirm? I dont want to waste time getting wrong parts.


Thanks.

[1of1TA1.0]

Doug Shelby makes stainless versions of these just FYI, you can contact him and I'm sure he will point you in the right direction!

Oh, and an easy way to get those out, use a grinder to cut a straight slot in what's left. Then use a large straight blade screwdriver.

[Steve-Indy]

Agree with contacting Doug at DSE...a sponsor here.

Link: http://www.dougshelbyengineering.com/viper.html

[Arizona Vipers]

Agreed with the above, shoot Doug Shebly an email, I go through a lot of these, same with the diffuser bolts and use Doug for all of them.

[SSGNRDZ_28]

Thanks guys. These are not the M6 screws but are pop rivets. They will have to be drilled out if you want to replace them and you'd also need a rivet larger gun to insert them. I do have these available on my website.

Thanks
Doug