Gen 3 Damper Adjustment

[Vipington]

Hi Viper Guru's,

Searched high and low on this one, but can't find anything definitive!

Does anybody know if it's possible to adjust the standard (Koni) dampers on a Gen 3. Found plenty of info relating to the Gen 2 shocks, ie, remove spring, compress damper and turn to adjust. But cannot find out if Gen 3 has the same adjustability.

Don't really want to remove one and pull it apart just to find out!

Any help much appreciated.

Cheers.

[Mamba003]

Stock gen3 and 4 dampeners are not adjustable.

[v10viperbox]

Gen III is not adjustable but takeoff sets from the ACR which pop up from time to time are.

Moton and Penskie both make a very good setup for street or track depending on budget and what spring rates you want to run.

[Vipington]

Thanks chaps.

Saved me from dismantling just to find out for certain.

I'll probably look at replacement in the future to get a better ride quality, standard setup is fairly harsh. Budget a bit tight at present however!!