Front bumper red stryker logo

[V10 Snake]

Can anyone point me in the right direction. Looking to replace my front bumper logo to match my added stripes. Looking to replace the stock black/grey raised logo with the flat looking red stryker logo. No forum vendors seem to carry it. ANY help would be appreciated. THANK YOU!

[Scott_in_fl]

Are you talking about the decal vs the metal badge?

[dirtyboot]

Sounds like you're looking for a gts-r nose badge

[01sapphirebob]

Can anyone point me in the right direction. Looking to replace my front bumper logo to match my added stripes. Looking to replace the stock black/grey raised logo with the flat looking red stryker logo. No forum vendors seem to carry it. ANY help would be appreciated. THANK YOU!



What dirtyboot said. The only color badges that were on the GEN V's were the Blue ones that came on the launch editions and then the grey ones that came on all the other cars. There is also the red decal that came on the '17 GTS-R final edition cars.

[Lost me beer]

I found a knock off on ebay. It is a tiny bit larger, but nit noticably. I like it myself. My not hold up like oem. If so, I can put the oem back on. Pic isn't the cleaest there, but the logo is identical to oem.
Troy

[q8blueviper]

looks cheap to me !

https://www.aliexpress.com/item/86mm-2PC-Fit-Dodge-SRT-Viper-Bonnet-Hood-Trunk-Badge-Auto-Snake-logo-red-metal-Emblem/32597336775.html

[One Viper Bite]

OP, if you're looking for the matte black decal logo that came on the TA + was an option on the 1 of 1 GTCs, any skilled vinyl/wrap shop can create one in any color for you if you get them a high resolution PNG or SVG of the Stryker logo from the internet.

I saved you the trouble and found you one to use. Download it and get it to a reputable vinyl/wrap shop.

https://worldvectorlogo.com/logo/viper-stryker-1

[parabs]

Awesome, thanks OVB!

[V10 Snake]

Are you talking about the decal vs the metal badge?

red decal would be fine

[V10 Snake]

OP, if you're looking for the matte black decal logo that came on the TA + was an option on the 1 of 1 GTCs, any skilled vinyl/wrap shop can create one in any color for you if you get them a high resolution PNG or SVG of the Stryker logo from the internet.

I saved you the trouble and found you one to use. Download it and get it to a reputable vinyl/wrap shop.

https://worldvectorlogo.com/logo/viper-stryker-1

awesome. Thanks!!

- - - Updated - - -


looks cheap to me !

https://www.aliexpress.com/item/86mm-2PC-Fit-Dodge-SRT-Viper-Bonnet-Hood-Trunk-Badge-Auto-Snake-logo-red-metal-Emblem/32597336775.html

This also looks good. Thanks!

[serpent]

I want to do an orange one to match my calipers. My car is gun metal pearl. I think it would look sick. I also have the side viper lettering, but not sure I would do that in orange either.

[Lost me beer]

In person the one I got off ebay looks exactly the same, not cheap at all. Woudnt put a cheap looking logo on a 100 grand car.
Troy

[BJG32]

34451

I can make them. $17 shipped

[V10 Snake]

34451

I can make them. $17 shipped

i like that alot. i found one on ebay and will try it but it looks a little bigger than the stock one.. will post pics when installed. hopefully later today

[Lost me beer]

i like that alot. i found one on ebay and will try it but it looks a little bigger than the stock one.. will post pics when installed. hopefully later today

If it is the one I found on ebay, yes it is a bit larger.
Troy

[imzoomintoo]

Try Allen Rafieha at Instagram @viperbadges he custom makes them!

[eseery]

I don't know anything about the quality (never ordered one) but check out @viperbadges on instagram. I know they have all different varieties. I think their email address is viperbadges@outlook.com

- - - Updated - - -

oops. Didn't realize someone already recommended this. Disregard my comment.

[jwalk]

34470Had my local paint shop paint the gray badge.

[V10 Snake]

34490

What do you guys think? Too big?

[V10 Snake]

Sorry This is better

[V10 Snake]

34492

I stink at this stuff. This is better

[kriskyk]

Looks good,

That red badge looks good as well

[AZTVR]

What do you guys think? Too big? Looks out of place to me.

[ViperGeorge]

Looks too big and a bit out of place IMO.

[imzoomintoo]

I think it looks great...a little of the Gary shading might have helped it blend a bit better.

[Lost me beer]

I like it. Sets off the red pin striping.
Troy