TA 2 0 OEM dive plane

[nuviper]

Does anyone know where to purchase the oem ta 2.0 front dive plane (carnard)? I cannot find the part number for it.

Thanks!

[BlueAdder]

68252740AB and 68252741AB
those are the uppers on the ACR, if you need the lower ones: 68284580AA and 68284581AA

Assuming of course that the TA uses the same stuff.

[Special Ed]

The T/A canard is different than the ACR. The shape and size are slightly different. I know this does not help. I would bet Woodhouse or VE could give you the part number.

[BlueAdder]

The T/A canard is different than the ACR. The shape and size are slightly different. I know this does not help. I would bet Woodhouse or VE could give you the part number.

Sorry, I didn't know that and I was hoping that they'd be the same ��. Agreed with Woodhouse being able to help, I got one ACR dive plane from them, quick and easy.

[dirtyboot]

So..knowing that they're different, and in light of Pappy's comment on another thread about pulling air through the wheel, if you're looking for the single canard style would it be more beneficial to get the TA2 or the ACR lower canard?

[nuviper]

Thanks guys. The part number for TA 2.0 are 68252738AB and 68252739AB. As far as I can see from pictures, the TA 2.0 one has larger size and side lip. It also extends more to the front and has larger rake angle. A side by side comparison might be more clear if someone can do this.

[cubeman]

Thanks guys. The part number for TA 2.0 are 68252738AB and 68252739AB. As far as I can see from pictures, the TA 2.0 one has larger size and side lip. It also extends more to the front and has larger rake angle. A side by side comparison might be more clear if someone can do this.

Oh sweet this dude found the part number let me see the cost and consider it. Oh $800 for some ankle cutters...maybe later

[Arizona Vipers]

Xtreme makes the 2.0 replicas

[cubeman]

Xtreme makes the 2.0 replicas

Out of stock on their website, first place I checked after seeing OEM. Maybe I'll shoot them a message on FB