PDA

View Full Version : X brace torque value


uberpube
08-05-2018, 08:39 AM
Anyone have this handy, my cars x brace came loose and started rattling around.
TrackratViper
08-05-2018, 08:45 AM
15 foot pounds. Torque the rear ones first.
ACRucrazy
08-05-2018, 08:58 AM
Seems to be a common issue.
Special Ed
08-05-2018, 09:11 AM
Seems to be a common issue.

Yes I agree. It's the second time I have heard of this and the first time the person had removed the cross brace and wasn't sure of the torque value.
06SRTCoupe
08-05-2018, 09:17 AM
Throw a little blue Loctite on there.
Lost me beer
08-05-2018, 12:43 PM
I know those are the correct numbers but I wonder if it might be a type in the manual. 15'lb sure seems low to me for that steel bolt. Would make sense if aluminum.
Troy
uberpube
08-06-2018, 03:30 PM
I went over all the bolts with a torque wrench, all were loose. Car sounds tight again..
cashcorn
08-06-2018, 03:43 PM
Mopar instructions. loctite & 20lbs. I upgraded my 14 SRT to the T/A OEM X brace. Mine has never come loose.. good luck!