SSGNRDZ_28
08-14-2017, 09:43 AM
Overview:
Solid Street Shield
Debris and water can escape the openings on the wheel vents on the ACR Extreme hood. The solid street shields greatly reduce or eliminate any debris exiting the wheel vents.
Vented Track/Street Shield
Track and street debris will escape the openings above the wheels once the plastic vents have been removed. The vented track/street shields prevent larger debris from being flung onto the top side of the car and windshield while still maintaining a large amount of airflow and downforce levels. On the street these allow for a more aggressive look while still maintaining some level of protection.
Compatibility:
The solid shields are meant for street use only on 2016-2017 ACR Extreme Vipers. They require the plastic wheel vent to be installed as they install on the underside of it. The vented shields are meant for street / track use on 2016-2017 ACR Extreme Vipers. They require the plastic wheel vents to be removed as they install in place of them.
Construction:
The shields are fabricated from aluminum and hard coat black anodized.
Weight:
The set of vented shields weighs 0.9 lbs while the solid shields weigh 1.6lbs.
Ordering Information:
DSE-VP-EA-008: ACR Extreme Street Vent Shield - Solid Street Version (use w/ Plastic Vent) (Set of 2)
DSE-VP-EA-010: ACR Extreme Vent Shield - Vented Track/Street Version (Stand Alone) (Set of 2)
Installation instructions:
Installation is simple, requires no extra hardware, and as always no modification to your Viper!
http://nebula.wsimg.com/ba04e3ad8ac91183c57ebb80014a6413?AccessKeyId=4EF98 E231536788212BE&disposition=0&alloworigin=1
http://nebula.wsimg.com/84728896b0ef8bf66051fede0a31e45e?AccessKeyId=4EF98 E231536788212BE&disposition=0&alloworigin=1
Vented Shield Set
27746
Solid Shield Set
27747
Solid Shield Installed (showing debris intercepted after <100 miles)
27748
Vented shield installed (showing airflow paths through and around the shield)
27749
Vented shield installed
27750
Solid Street Shield
Debris and water can escape the openings on the wheel vents on the ACR Extreme hood. The solid street shields greatly reduce or eliminate any debris exiting the wheel vents.
Vented Track/Street Shield
Track and street debris will escape the openings above the wheels once the plastic vents have been removed. The vented track/street shields prevent larger debris from being flung onto the top side of the car and windshield while still maintaining a large amount of airflow and downforce levels. On the street these allow for a more aggressive look while still maintaining some level of protection.
Compatibility:
The solid shields are meant for street use only on 2016-2017 ACR Extreme Vipers. They require the plastic wheel vent to be installed as they install on the underside of it. The vented shields are meant for street / track use on 2016-2017 ACR Extreme Vipers. They require the plastic wheel vents to be removed as they install in place of them.
Construction:
The shields are fabricated from aluminum and hard coat black anodized.
Weight:
The set of vented shields weighs 0.9 lbs while the solid shields weigh 1.6lbs.
Ordering Information:
DSE-VP-EA-008: ACR Extreme Street Vent Shield - Solid Street Version (use w/ Plastic Vent) (Set of 2)
DSE-VP-EA-010: ACR Extreme Vent Shield - Vented Track/Street Version (Stand Alone) (Set of 2)
Installation instructions:
Installation is simple, requires no extra hardware, and as always no modification to your Viper!
http://nebula.wsimg.com/ba04e3ad8ac91183c57ebb80014a6413?AccessKeyId=4EF98 E231536788212BE&disposition=0&alloworigin=1
http://nebula.wsimg.com/84728896b0ef8bf66051fede0a31e45e?AccessKeyId=4EF98 E231536788212BE&disposition=0&alloworigin=1
Vented Shield Set
27746
Solid Shield Set
27747
Solid Shield Installed (showing debris intercepted after <100 miles)
27748
Vented shield installed (showing airflow paths through and around the shield)
27749
Vented shield installed
27750