Belanger Headers Exhaust 1 no reserve on ebay

[Arizona Vipers]

I just posted these in the classifieds- https://driveviper.com/classifieds/exhaust/p2009-belanger-headers-and-exhaust.html

They are on ebay for $1 no reserve- http://www.ebay.com/itm/332260558203


Thanks.

[Arizona Vipers]

Just a heads up, this auction ends in 4 hours, 9:30PM Eastern time!
They are at $1300 right now... Steal them! http://www.ebay.com/itm/332260558203

[ForTehNguyen]

if they were catted i would get them :(

[cashcorn]

just curious, what would it cost to have them recoated? good luck with sale!

[V10powerr]

is there anything wrong with them?

[donk_316]

is there anything wrong with them?

Yeah they are Belangers.... haha!
Aluminized steel with peeling ceramic coat... cmon.

[cashcorn]

fyi, belangers are the headers with the most tq in the viper power range. best header for the road course. if you are a drag racer? go long tube. :drive:

[ViperPete]

Why do they look like shit after such a short period of time?!?

[stradman]

Why do they look like shit after such a short period of time?!?
It doesn't take much time at all before the coating starts to blister and even peel. Lots of heat generated.

[Steve M]

Why do they look like shit after such a short period of time?!?

Whoever does their coating does a shit job...it's either bad prep, a bad coating, or a combination of both. There is no excuse for it IMO, especially at that price.

[ViperPete]

Whoever does their coating does a shit job...it's either bad prep, a bad coating, or a combination of both. There is no excuse for it IMO, especially at that price.

For real.... I will be seriously disappointed if mine look like that after a couple years.

[Vipes]

just curious, what would it cost to have them recoated? good luck with sale!

In just dropped my headers off today. Quite a few people I know have used the place I went for the last couple decades with no flaking. My only guess is they used the cheaper 1300 temp coating? I'm getting the high temp 2,000 degree coating in flat black for $370. It comes with a 3 year warranty. I don't know what it would cost to removed old coating though.

[ViperPete]

In just dropped my headers off today. Quite a few people I know have used the place I went for the last couple decades with no flaking. My only guess is they used the cheaper 1300 temp coating? I'm getting the high temp 2,000 degree coating in flat black for $370. It comes with a 3 year warranty. I don't know what it would cost to removed old coating though.

They'd probably have to sand blast it on.
Make sure you post pics, id like to see the headers coated in black.

[Quasar Z]

I recently purchased a set of Belangers and they were also peeling. I brought them into a local powder coater and had the high temp black ceramic coating done. They came out great and I am looking forward to installing them in a few weeks. 26598
26599

[biturboamg]

Those do look good in black.

[Vipes]

They'd probably have to sand blast it on.
Make sure you post pics, id like to see the headers coated in black.

I just got them back today. I asked the shop about how they would get old coating off and they said sand blast just like you mentioned.

http://i63.tinypic.com/2pqn7tz.jpg

[Arizona Vipers]

Whoever does their coating does a shit job...it's either bad prep, a bad coating, or a combination of both. There is no excuse for it IMO, especially at that price.

To Belanger's defense, I track this car hard here in hot Arizona, I've melted everything under my hood more than once. They've seen more abuse than 99.9% of these will see. That's another reason I went with the American racing, they are stainless steel which has a much lower thermal conductivity than mild steel.

[outnumbered]

Whoever does their coating does a shit job...it's either bad prep, a bad coating, or a combination of both. There is no excuse for it IMO, especially at that price.

I believe Jet Hot Coatings.

[biturboamg]

If anyone wanted a set I picked up a take off set from NTH and won't be using them. They are the headers, hi flow cats, muffler set up. I didn't even open the box from NTH. PM if interested in them. They are ready to ship right now.

[poptarts]

If anyone wanted a set I picked up a take off set from NTH and won't be using them. They are the headers, hi flow cats, muffler set up. I didn't even open the box from NTH. PM if interested in them. They are ready to ship right now.

How much you asking?

[biturboamg]

Just posted in classifieds.

https://driveviper.com/classifieds/exhaust/p2062-belanger-headers-2c-hi-flow-cats-and-mufflers.html

[biturboamg]

$2600.00 plus shipping in the classifieds for sale!

https://driveviper.com/classifieds/e...-mufflers.html

[biturboamg]

Sold the cat back but the headers, hi flow cats are still for sale in the classifieds and on ebay as well. $1799.00

http://www.ebay.com/itm/202054841536?item=202054841536&viewitem=&vxp=mtr

[Dan Cragin]

I am not a big fan of mild steel headers bust have found they the Belangers run much coolers than stainless headers.

[heath1225]

I've run the balls off of Belangers for almost 3 years and they still look brand new.