REAR Boomerang Stone Guards

[Jack B]

A little heads up, the Stone Guards are available from both Woodhouse and DSE.

As promised we are close to releasing the rear stone guards. I originally did not think they were needed, however, my car has approx 10,000 miles on it and the rear fender inner lips are sand blasted to the point where they are unsightly and need to be repainted. Both the front and now the rear Boomerang stone guards accomplish several things:

1. On a new car they keep the painted inner part of the fender from getting destroyed.

2. If you already have damage, they hide the damage and stop it from getting worst.

3. Items #1 and 2 are accomplished in a very non-intrusive way, the Boomerang Stone Guards blend in and sort of disappear.

If you have not followed the original Boomerang thread, the only reason I decided to build these was that I could not stand how the front sills looked after a few thousand miles. Just an opinion, but, these should be considered a must on a new car.

I want to run these a couple of weeks on my car and see how they hold up, at that point it will be about 30 days to have product for sale. These will mount using two of the OEM screws, no drilling required.

25959

[Space Truckin]

The fronts ​work excellent, count me in...:United_States:

[SRZ]

I am in for one too.

[ACRSNK]

Will these be made in Carbon Fiber?

[SOberman001]

I am in!!

[Jdmuscle]

I'm in

[Wagnut ACR]

Already have the fronts, time for the rear.

[sharmut]

Hi Jack,

Already have a set for the front and will take a set for the rear once they are available.

[ViperSRT]

Ditto

[Goat19642004]

I'll take a set also.

[sambo32]

Include me for a set of rears, already have front.

[pj96ss]

I have the fronts as well, I'm in for a set!!!

[Vipes]

Looking forward to ordering these, I like my fronts!

[Augdog1964]

Fronts here... rears when ready!

[1Koolasp 16ACR]

I'm In , Will Take A Set Front And Rear !!

[bluesrt]

I need 2 sets for rear

[docwviper]

Can these also come in carbon fiber? I have a set of the fronts but would great to have them front and back in carbon fiber.

[Purple Haze]

So there is a factory hole already there to mount? Guess I should go look at mine. If so I'm in too...

[Scott_in_fl]

This is a no-brainer, front and rear.

[EZ 2B Green]

+1 rear set

[ACRSNK]

Can these also come in carbon fiber? I have a set of the fronts but would great to have them front and back in carbon fiber.

You have fronts in Carbon Fiber?

[donk_316]

I have the fronts. I'll take a set of rears

[Exhlr8n]

Have the fronts, will need a set of the rears.

[Dman]

I want them all now, lol, hell I'm happy to test those rears too ;-)

I guess I'll call Mark and buy fronts, pre-order rears would be great so I don't miss out on the first run and have to wait.

I had these type guards on my gen3 and 4 and they were a savior.

[Jack B]

I will start the process of programming thm into a CNC machine in two weeks. As soon as the drawing is done, it will be interesting to see if we can do carbon fiber.

[Martin]

I'm in for fronts and rears. Double wrapped everything with clear bra for now, but that's just a temporary solution.

[ACRSNK]

I would be in for Carbon Fiber fronts and rears.

[ClayR]

need rears.

[SuperBird4404BBL]

I have the fronts, I'll take a set for the rear.

[SSGNRDZ_28]

Thanks, Jack. Looking forward to installing and stocking the rears when they are ready.

[Stealth]

4. The front and rear guards protect the painted areas behind the wheel, not just the painted areas in the wheel wells.

[99Vipers]

I would be in for Carbon Fiber fronts and rears.

+1......................

[Dr.Ron]

Need rears. Will you make a new thread when the rears are available for purchase?

Ron

[ViperPete]

I'll take a set of rears.

[Whitey]

Im in!

[Hamrhead]

Already have the fronts, time for the rear.

^What he said.

I'm in when they are available.

[Vipes]

I hope you make a lot the first batch lol. Looking forward to getting them.

[mjorgensen]

Well after going through maybe 150 sets of fronts I suppose we will sell at least 150 sets of rears to start ;-) Nice work Jack and thanks.

[docwviper]

You have fronts in Carbon Fiber?

Nope requesting that they be made though. Would look good.

[keepat]

Yes!!

[ViperGeorge]

I need two sets of rears.

[LmeaViper]

A little heads up, the Stone Guards are available from both Woodhouse and DSE.

As promised we are close to releasing the rear stone guards. I originally did not think they were needed, however, my car has approx 10,000 miles on it and the rear fender inner lips are sand blasted to the point where they are unsightly and need to be repainted. Both the front and now the rear Boomerang stone guards accomplish several things:

1. On a new car they keep the painted inner part of the fender from getting destroyed.

2. If you already have damage, they hide the damage and stop it from getting worst.

3. Items #1 and 2 are accomplished in a very non-intrusive way, the Boomerang Stone Guards blend in and sort of disappear.

I want to run these a couple of weeks on my car and see how they hold up, at that point it will be about 30 days to have product for sale. These will mount using two of the OEM screws, no drilling required.

25959

What kind of testing did you do with respect to their size / coverage? I only ask as at first I expected they might be a bit bigger?
thks

[Scott_in_fl]

I agree these can probably be quite a bit larger and still not be too obtrusive given that they are situated so low on the car.

[LABrit]

Also In for a set.

[Dfunk]

I'm down for a pair of rears.

[Jack B]

I started a little larger, but, the sight line was not right. I want to see how these work, so I am trying to get some miles on the car. I am going to increase the outer circle by 3/4 in to see how they will compare.


What kind of testing did you do with respect to their size / coverage? I only ask as at first I expected they might be a bit bigger?
thks

[kuishe]

Count me in!

[38D]

Have the fronts, will definitely get the rears when avail.

[Crotalidae]

I'll take a set of rears as well...thanks!!!

[ViperTony]

I want!

[06_SRT]

Dang... I'm behind on times and didn't even know fronts were available. I'd be in for a complete set. Had them on my Gen III and loved them.

[theviper]

Nope requesting that they be made though. Would look good.

Not sure what the cost would be for that and they would probably looked ruined very quickly. I think you're better off wrapping it with a carbon fiber wrap (costs virtually nothing) and it will look like the real thing. No one will know the difference on a small piece that goes in the wheel well.

[Apxnv]

Please count me in for a rear set. Thanks.

[USCDOC]

yes please!

[ek1]

Please put me down for a set of rears. I had the fronts installed before picking up the car at the dealership and they work great.

[LmeaViper]

I started a little larger, but, the sight line was not right. I want to see how these work, so I am trying to get some miles on the car. I am going to increase the outer circle by 3/4 in to see how they will compare.

Ok thks

[Arizona Vipers]

Do you have better pics from different angles?

Thanks!

[theviper]

How much are the front and rear stone guards?

[Fourtrax250r]

Have fronts, will be purchasing these!!

[SilveRT8]

I'm in for a set of front and rears when available

[GTS21]

Think I'm in for a full set of fronts and rears, but would really like to see more pics first

[Jack B]

what angle do you want?


Do you have better pics from different angles?

Thanks!

[TitanSnake]

Definitely interested.

[Viper Pit]

Put me on the list.
I just ordered the fronts.

[Smokin]

I am in for a set of fronts and a set of rears

[Bossing]

Same here.... F & R sets please.

[bkrone]

Interested in a set, F & R.

[ACRSNK]

Put me on the list.
I just ordered the fronts.

What he said.

[mjorgensen]

Well the list is getting long if anyone on this thread needs to put in an order give me a call and I'll get you included in the initial runs. Thanks

[No hemi]

How much do they go for?, def. interested.

[mjorgensen]

How much do they go for?, def. interested.

Do not have a set price yet till his first order is delivered from manufacturer.

[ACRSNK]

Well the list is getting long if anyone on this thread needs to put in an order give me a call and I'll get you included in the initial runs. Thanks

Thanks Mark!

[ACR Steve]

stop teasing when can we get it? :)

[Vipes]

Ordered, looking forward to them.

[Jack B]

I put 300 miles on the car with only the drivers side having a rear stone guards, here are the details:

1. I guess I never looked close at the damage to the area behind the rear wheelwell. With just 10,000 plus miles, it needs a repaint. There are a large number of stone chips right down to the base material

2. The rear stone guard pictured on this thread protects most of the underhang behind the wheelwell. Therefore, nò reason to go larger. The underside of the unprotected side showed a horizontal dirt pattern from tire tire debris hitting the underside, The protected side was dirty, but, no sign of tire sandblasting.

3. I started the CNC drawing/programming process. It will probably be two weeks before I get a prototype part. If it fits the car, it will be another two weeks for production parts.

[theviper]

So Jack B, Woodhouse, and others who are working on a product, this product sounds great and a no brainer. Should have come standard or as an option from the Dodge. In any case, I think everyone here would like to know the price that each is offering and the variances between the products. If all are in prototype phases without exact details, no worries. But if you have the info, please let us know. If the price is low enough, I can't imagine a situation where every owner doesn't buy one!

[BlueAdder]

So Jack B, Woodhouse, and others who are working on a product, this product sounds great and a no brainer. Should have come standard or as an option from the Dodge. In any case, I think everyone here would like to know the price that each is offering and the variances between the products. If all are in prototype phases without exact details, no worries. But if you have the info, please let us know. If the price is low enough, I can't imagine a situation where every owner doesn't buy one!

Even if it's $100, it's still worth the money because sending your rear bumper/fascia whatever it is back to prefix to get it repainted sure as sh*t will cost you more than that.
I put some Road Warrior Pro on that area for now but eventually, the stone guards will be a better solution.

[cashcorn]

I think it is a great 2nd level of protection, after expel. My expel also, covers the inner fender well lips with a cut-out around the fender lip screws.. 4,200 miles, just like brand new. Behind all tires, it looks perfect.

[mjorgensen]

Even if it's $100, it's still worth the money because sending your rear bumper/fascia whatever it is back to prefix to get it repainted sure as sh*t will cost you more than that.
I put some Road Warrior Pro on that area for now but eventually, the stone guards will be a better solution.

Sold! $100 😊

[Vipes]

If you have to ask the price you probably can't afford these. J/k They should be similar in pricing to the fronts I would assume.

[Jack B]

The cost will be close to that of the fronts. The costing will be done next week. The only thing that could change the price is the percentage of waste there is per sheet with the rear design.



If you have to ask the price you probably can't afford these. J/k They should be similar in pricing to the fronts I would assume.

[theviper]

I think it is a great 2nd level of protection, after expel. My expel also, covers the inner fender well lips with a cut-out around the fender lip screws.. 4,200 miles, just like brand new. Behind all tires, it looks perfect.

Exactly. My expel protects the inner lips as well so it's just another layer of protection. Maybe worth it for the right price.

[poptarts]

I'm interested in front and rear....

[Jack B]

Exactly. My expel protects the inner lips as well so it's just another layer of protection. Maybe worth it for the right price.

I had the 3M wrap, it was destroyed on the inner lip in 5000 miles.

[customryder]

where do you buy the fronts? I would like a set of rears also
thanks,
Jeff

[Purple Haze]

I'm in for front and rear....

[mjorgensen]

where do you buy the fronts? I would like a set of rears also
thanks,
Jeff


I'm in for front and rear....

You can email me !nd I'll get a hold of you Monday after the Viper rendezvous. Mark.jorgensen@woodhouse.com
Thanks