TA 1 0 and 2 0 splitter rub strip dimensions

[Mclarengts]

Does anyone the actual dimensions and diagram of TA 1.0 and 2.0 rub strips?

[Voice of Reason]

Does anyone the actual dimensions and diagram of TA 1.0 and 2.0 rub strips?

I ordered replacements a couple months ago (search my name for the post about it). I used to think I could easily make them but after swapping them I changed my mind. The holes have to be clearanced for for the hardware on the splitters at the screw points, it's not just a flat piece of plastic.

That being said I'm surprised there isn't someone making a single piece unit that covers the full front and. It just the corners. It would need some extra reinforcing in the middle, but there are two holes already there that could be utilized. If done right a single splitter could be made to look a lot like the ACR splitter without the extension.

[donk_316]

ARD makes replacement rub strips. Or pull your own off and measure them up.

[Mclarengts]

ARD makes replacement rub strips. Or pull your own off and measure them up.

ARD in Georgia?

[98intrigue]

ARD in Georgia?

Correct. I bought replacements from them.

[SRZ]

I have a brand new set from ARD for TA 1.0 that I need to sell if anyone is interested. I sold my TA and never installed it.

[PkB2014]

ARD makes replacement rub strips. Or pull your own off and measure them up.

Is ARD replacement price for a set of 2 or is that price for 1 side only? That is the first reasonable price I've seen if it is for a set of 2. For some reason I saw the set of both TA1 & TA2 together for $250 and thought it was 1 set. Glad to see this is $100 for a set of TA1 instead of each side being $100.

[donk_316]

The price is for a set... who the hell would price them as left and right??

[Voice of Reason]

I got the 1.0 + 2.0 combo set from ARD, luckily my new drive has juuuust enough clearance that the 2.0s don't scrape so I'm sticking with them for a while.

[donk_316]

Yeah I bolted on their 2.0 onto my 1.0

Good product

[PkB2014]

The price is for a set... who the hell would price them as left and right??

HA, yeah I realized that but still figured I'd confirm. I ordered a set. Thanks!

[biturboamg]

I had my pulled off and a local shop make me a new set off the factory units and was around $160 if I recall.

[ViperSRT]

ARD makes replacement rub strips. Or pull your own off and measure them up.

Finally got mine on a lift tonight. I do not see any rub strips at all. Am I missing something? TA 2.0 splitter.

[Voice of Reason]

Finally got mine on a lift tonight. I do not see any rub strips at all. Am I missing something? TA 2.0 splitter.

The plastic splitter itself is the rub strip, it's held into the carbon fiber piece by about 8 bolts. You replace the entire thing when necessary.

[ViperSRT]

Ah, thanks as some of us are unable to grasp what may be obvious to others. I will have to look at replacement costs as in 200 very careful miles I already have some wear points.