about shifter gt gt gt

[No hemi]

I have a MGW shifter I had bought for my second Gen 3 car, but sold it before I installed it, will this short shifter fit the Gen V transmission?.

[slowhatch]

Maybe. TR6060 in the Gen 5s, T56 in the Gen 3. A 6060 is technically a T56 with differing internals so the shifter may work? Someone with experience can chime in...

[Rare Snake]

How much gain would there really be on a V? It's a pretty short shift already.

[No hemi]

I think it would be a bit shorter throw , plus a more positive shift, sometimes I feel the factory one a bit sloppy , and when you're down in mexico you don't want to miss a shift ;)

[slowhatch]

I think it would be a bit shorter throw , plus a more positive shift, sometimes I feel the factory one a bit sloppy , and when you're down in mexico you don't want to miss a shift ;)

I would highly recommend leaving the factory Gen 5 shifter alone and putting in a shorter handle (like an MGW gripper or ripper unit).

The gen 5 oem shifter is as nice as the aftermarkets. It was improved from the shifter used in TR6060s in the gen 4s.

[ForTehNguyen]

G5 factory shifter is almost as good as the MGW in my 2015 Mustang GT. Only thing I dont like about it is the baseball shifter, Im getting the more canned shaped one from viperstore

[Jack B]

A G4 shifter will fit the G5 if you replace the four hold-down bolts, not sure about the G3 shifter. Like Alex said, the height diff on the 6060 may be a problem. I can tell you this, you have approx 3/4" from the flat area on the shifter top to the bottom of the tunnel.


I have a MGW shifter I had bought for my second Gen 3 car, but sold it before I installed it, will this short shifter fit the Gen V transmission?.

[No hemi]

thanks guys, I guess i'll be selling a G3 MGW shifter :)

[texasram]

Maybe. TR6060 in the Gen 5s, T56 in the Gen 3. A 6060 is technically a T56 with differing internals so the shifter may work? Someone with experience can chime in...

A magnum is a 6060 with differing internals.