Getting Ready For 2k17 F1X Procharger Nitrous Build

[Terry504]

I'm having fun building my own car in time for 2k17. Who else will be going? Ordered Procharger Thursday and ripped my car apart to start install on my Nitrous Outlet Complete Kit and Standalone Fuel yesterday. Car already has American Racing Headers installed so basicly going from 600rwhp to 1000rwhp wish me luck.23380

[Terry504]

23382
23383
23384

[plumcrazy]

small bottle wont be any fun.... get two larger ones

[Terry504]

small bottle wont be any fun.... get two larger ones

Will do got the Kit used planning on getting 2 15lb Bottles

[plumcrazy]

smart. liking the install though, clean looking

[Terry504]

smart. liking the install though, clean looking

Thanks

[Terry504]

Car is down so I decided to Paint a few Acc. Painting Cross Bar Black, Fuel Cap Black, Engine Covers White where they are Red and Smoking Side Markers.23399

[1.8t]

Love watching builds like these. Thanks for sharing!

[Charged]

What Procharger?

[Arizona Vipers]

Awesome! Takes balls to do what you are doing at home. What is 2K17?

[Terry504]

Love watching builds like these. Thanks for sharing!

Thanks I have everything on here since I purchased my car a year ago check out "Viper Mods Advice" thread. I really enjoy saying I turned every bolt myself.

- - - Updated - - -


What Procharger?

Prospeed aka D3 Performance F1X Kit

[Terry504]

Awesome! Takes balls to do what you are doing at home. What is 2K17?

TX2K17 its a Street Car Event in Houston, Tx once a year March 16-20. A bunch of High HP Cars from around the World in 1 spot.

[The_Ruski_Driver]

TX2K17 its a Street Car Event in Houston, Tx once a year March 16-20. A bunch of High HP Cars from around the World in 1 spot.

Hey man,
I am flying in from NJ but will be watching. I'll come look for your car - Will be there all day Friday. Build looks awesome!

Will be cheering you on although, as I'm sure you know, 1000 will not get you far but you'll still have a lot of fun!

[Terry504]

Hey man,
I am flying in from NJ but will be watching. I'll come look for your car - Will be there all day Friday. Build looks awesome!

Will be cheering you on although, as I'm sure you know, 1000 will not get you far but you'll still have a lot of fun!

I know just wanna have fun lol not tryna be a top runner I have 1000hp goals and I'm done can't afford to compete with 100k Builds. I will only have like 20k in my car and if my Wife knew that she would kill me lmao

[Terry504]

23419

So I've come to a stopping point after getting off from work today with nothing to do Nitrous Installed and Intake, Underdrive Pulley, Front Bumper and Hood removed to do Procharger. There is a 7-10 day wait on Head Unit before it ships. I also ordered a Catch Can, Short Shifter Knob and Rear Diffusers Saturday. Just ordered the Radiator Hard Pipe from Calvo today to many High HP Hose Collapse Issues going around worth the extra insurance. Hopefully something comes in soon so I can get back to work on Project.

[Terry504]

23420
23421

Also helping do a Custom Turbo Nitrous Build on my Little Brothers Trans Am. He's at a stand still also ordered his Turbo 1.5 weeks ago still waiting smh. He's 18 lol I'm 29 btw.

[Utahviper]

I'll be there with the yellow car. I'm just going there to have fun. Not gonna compete with the big builds but gonna have fun nonetheless:)

[timberwolf]

Bada$$ build! Who did you get the Procharger kit from? Can't wait for updates!

[Terry504]

Might not be able to come until Saturday I have something to do locally Friday evening.

[Terry504]

Bada$$ build! Who did you get the Procharger kit from? Can't wait for updates!

Thanks D3 Performance aka Prospeed waiting on Parts now I can't wait either. I ordered Rear Diffusers they came today I think I may wait until I atleast order and install Rear Spoiler and Front Splitters though. Do complete Aero at once.23467

[PaulP]

Nice thread keep it up! fourm needs more of this.

[Terry504]

Nice thread keep it up! fourm needs more of this.

Thanks Bro I love the experience of working on this car so many unknown obstacles makes it that much more fun. Check out my old thread complete Bolt On install Headers etc "Viper Mods Advice"23470
23471

[Terry504]

23472

[texasram]

Thats quite a reach for the purge button

[Terry504]

Installed Catch Can today and Spark Plugs came in the mail so they will be changed in the morning. I routed Catch Can on Passenger side it runs from Head to Head around back side and Plugged bottom of Intake with 1/2 Plug (Hose Size is 5/8"). I went with Denso ITV27 yes 9 Heat Ranges Colder most use 7 Heat Range NGK for Supercharger only. I opted for the Denso in 9 because I will spray atleast 200 Shot 1 heat range per 100 shot NGK doesn't carry higher then 7 for our Vipers.
23604
23605

[Terry504]

Short Throw Shifter Knob came in can't wait to install it!!!
23653

[Scott_in_fl]

This is awesome!

[Jdmuscle]

It's going to be a badass build terry... can't wait to see it. I'll ping you my number in FB. Let's catch up during TX2K.

[Terry504]

This is awesome!

Thanks

[Terry504]

It's going to be a badass build terry... can't wait to see it. I'll ping you my number in FB. Let's catch up during TX2K.

Cool I'm just hoping no issues with Procharger coming I ordered Feb 25 they said Procharger has a 7-10 day wait on F1X. Install will be a breeze since I have everything already off.

[Vital velocity]

Ill be there in my Yellow bumble bee

[Terry504]

Ill be there in my Yellow bumble bee

Cool I can't come until Saturday.

[Terry504]

There was a hold up on a few Pulleys from D3 so they couldn't Ship Kit but my Procharger came. Pray for me I only have 1 week to get this car back together ��
23711

[KB Viper]

awesome thread, good luck with the remainder of your build.

[Murpowa]

Yikes, best of luck. Will be a beast either way

[Terry504]

awesome thread, good luck with the remainder of your build.

Thanks

[Terry504]

Yikes, best of luck. Will be a beast either way

Thanks I really want to make it by the 18th

[slowhatch]

There was a hold up on a few Pulleys from D3 so they couldn't Ship Kit but my Procharger came. Pray for me I only have 1 week to get this car back together ��
23711

http://www.reactiongifs.com/r/vqGeMsr.gif

[Terry504]

Finally intalled Spark Plugs and Shifter today!
23739
23740
23741
23742

[NoMorZR1]

Does the kit come with a tuning module ?

[Terry504]

Does the kit come with a tuning module ?

I already have HP Tuners but it can be puchased with or without it. They're sending me Tune File and Injectors with my Kit.

[Ninjazx71]

Bet you are hating losing an hour last night more than anyone here... LOL! Good luck with getting this finished in time. Can't wait to see what the combo puts down and runs.

[poptarts]

i can't wait to see a video of this running and hear the sound. I'm trying to let the wife let me go for the event. i would love to watch

[Terry504]

Bet you are hating losing an hour last night more than anyone here... LOL! Good luck with getting this finished in time. Can't wait to see what the combo puts down and runs.

Thanks lol Really though I'm in a race against time smh

[Terry504]

i can't wait to see a video of this running and hear the sound. I'm trying to let the wife let me go for the event. i would love to watch

Hope I can make it I might be there with just my Lil Bro Trans Am we are working on his Turbo setup today. I'm still waiting on Parts.

[Terry504]

23774

Removed Injectors today it was more of a pain then I thought I had to Remove Intake to get Fuel Rails off.

[Terry504]

Can someone tell me where the TPS and RPM wires are Located and there Color?

[Jack B]

Can someone tell me where the TPS and RPM wires are Located and there Color?

Pick up the rpm off the input to a coil pack.

[Ninjazx71]

Can someone tell me where the TPS and RPM wires are Located and there Color?

I don't have the colors, but for the WOT switch on my Gen4 nitrous setup, we tapped into the passenger side throttle body for the TPS, and we used the front drivers side coil for RPM. Not specifics, but might get you in the right direction to start...

[Terry504]

Pick up the rpm off the input to a coil pack.

Thanks

- - - Updated - - -


I don't have the colors, but for the WOT switch on my Gen4 nitrous setup, we tapped into the passenger side throttle body for the TPS, and we used the front drivers side coil for RPM. Not specifics, but might get you in the right direction to start...

Thanks

[Terry504]

Looks like no TX2K17 for me Kit still hasn't shipped. I will continue to post Build but I'm really frustrated at this point may take a break on Build.

[poptarts]

Looks like no TX2K17 for me Kit still hasn't shipped. I will continue to post Build but I'm really frustrated at this point may take a break on Build.

that sucks. sorry to hear that

[Ninjazx71]

Looks like no TX2K17 for me Kit still hasn't shipped. I will continue to post Build but I'm really frustrated at this point may take a break on Build.

That blows man, sorry to hear... There's always next year, or another event. Still looking forward to seeing the rest of the build...

[ViperDC]

That sucks but fun build. Keep us posted. Car will be a beast

[PaulP]

Ahh shit man !

[Terry504]

Wish I could make it I really thought about double working myself and putting car back together to go Nitrous only. Not doing it way to much work I will be there next year though.

[poptarts]

Wish I could make it I really thought about double working myself and putting car back together to go Nitrous only. Not doing it way to much work I will be there next year though.

you will have the car dialed in by then.

[Terry504]

23974
23975
23976
Parts came in I installed Injectors, Modified Coolant Line and Relocated Oil Cooler this morning. If I get a hand I will Pin Crank and try to Complete install tomorrow.

[texasram]

If its any consolation im actually in houston and am also missing event due to car being down, but just like others have said theres always next year

[Terry504]

If its any consolation im actually in houston and am also missing event due to car being down, but just like others have said theres always next year

From what I've heard it kinda sucks this year Cops are harassing everybody that looks like there car might be Fast. My Cousin keeps leaving meets because he doesn't want anything on his License drives 18 wheelers.

[texasram]

From what I've heard it kinda sucks this year Cops are harassing everybody that looks like there car might be Fast. My Cousin keeps leaving meets because he doesn't want anything on his License drives 18 wheelers.

TRUE!! its social media's fault, some tx2k page's have hype photos accompanied by lawyer contacts lol it cray

[Jdmuscle]

Yeah.. anyone with non DOT tire is getting their car impounded. I've seen so many cars with skinnies in the front that got pulled over. Streets of TX2K will not be the same anymore. Too many kids doing too many dumb things

[Terry504]

Yeah.. anyone with non DOT tire is getting their car impounded. I've seen so many cars with skinnies in the front that got pulled over. Streets of TX2K will not be the same anymore. Too many kids doing too many dumb things

Man that really sucks SMH

[Terry504]

24043

I would not recommend doing install unless you have alot of patience and 2 Extra Hands. Extremely complex just like everything else on a Vipers SMH. First to Pin Crank you must unbolt 2 bolts holding Rack and Pinion. Also invest in an Angle Drill because there is still no room even after. Brackets are very tight basicly if you cant Build a Motor or anything major Installing Kit is not for you bring it to a Shop but honestly for me its fun maybe I'm crazy 5 hrs after work Crank Pinned and Head Unit on!!!!

[Crotalidae]

Great build...subscribed...

[Terry504]

24160
24161

Stayed up all night last night and actully Cranked Car 3am in the morning so far so good Car is Tuned and Running. I just have to put Body parts back on, wait on parts I'm getting Painted and wire a few Nitrous Acc up but I will hopefully complete this weekend.

[NoMorZR1]

Congrats ! I expect your hard work and patience will be paying off soon.

[Terry504]

Congrats ! I expect your hard work and patience will be paying off soon.

Thanks

[davidm0209]

Great work! I've been following this thread and have considered Nitrous for my Gen 3. Excited to hear about your results! :bth_smiley_formula1

[TwinVipers]

The easy part is done, now for tuning lol. Great build, man! Good luck!

[Terry504]

24346
24349
24348

Car is Tuned and running great I will rent a Dyno in a few weeks and post dyno results.

[NoMorZR1]

How' s the " seat of the pants" dyno feel ?

[Terry504]

How' s the " seat of the pants" dyno feel ?

Feels over 800 to me loving it so far so good we will fine Tune on Dyno waiting on my Bro to finish Turbo Build on his car 1st.

[texasram]

i might get the kit just for that intercooler ;)

[cashcorn]

nice.. Is this street legal in TX? thanks..

[Jack B]

Great job, lot of work. How did you tune, do you have a wideband installed. Good luck!!

[poptarts]

thats awesome.. can't wait to see a video or see it in person.

[ViperPete]

Looking forward to seeing your dyno results.

[HANKFAN]

nice.. Is this street legal in TX? thanks..

Isn't everything street legal in Texas? lol

[aNinjaneer]

Isn't everything street legal in Texas? lol

We actually have emissions/safety inspections in Austin. :(

[Terry504]

Great job, lot of work. How did you tune, do you have a wideband installed. Good luck!!

Tuned with Wideband it really sucks there's no support on HPtuners for MAF Voltage makes the car hard to Tune. Sorry for late response been really busy lately.

[Steve M]

Tuned with Wideband it really sucks there's no support on HPtuners for MAF Voltage makes the car hard to Tune. Sorry for late response been really busy lately.

HPTuners supports it if the PCM supports it...the MAF voltage PID is supported for the Gen 4, but not for the Gen 5. I don't fully understand why, but it is definitely a PCM-related issue. And yes, I can't imagine not being able to log MAF voltage when using a wideband...you'd be chasing your tail constantly.

[Jack B]

Steve:
.
Has HPT (G5) added the ability to turn off the LTFT, this would allow closed loop tuning.


[QUOTE=Steve M;289120]HPTuners supports it if the PCM supports it...the MAF voltage PID is supported for the Gen 4, but not for the Gen 5. I don't fully understand why, but it is definitely a PCM-related issue. And yes, I can't imagine not being able to log MAF voltage when using a wideband...you'd be chasing your tail constantly.[/QUOTE

[Steve M]

Steve:
.
Has HPT (G5) added the ability to turn off the LTFT, this would allow closed loop tuning.


Not that I've seen.

[Terry504]

24712
24713

Yep my crazy ass installed 3.73 gears on top of F1X and Nitrous lol. I love it my first drive was lastnight!!!

[KB Viper]

Yep my crazy ass installed 3.73 gears on top of F1X and Nitrous lol. I love it my first drive was lastnight!!![/QUOTE]

That's a baller ass set up, my man...

[Terry504]

Yep my crazy ass installed 3.73 gears on top of F1X and Nitrous lol. I love it my first drive was lastnight!!!

That's a baller ass set up, my man...[/QUOTE]

Thanks!!!!

[Murpowa]

Nice! Bet that pulls like a freight train

[Terry504]

Nice! Bet that pulls like a freight train

Pulls like crazy almost didn't install Gears I had them for a while now sitting in a box. Offered them Forsale but didn't have any real interest so I said what the hell just do it. Let's just say I'm happy with my decision lol.

[mackzilla]

Sick f***!


I dig it.

[Terry504]

Sick f***!


I dig it.

Thanks

[poptarts]

How does it handle on the street?

[Vipes]

Yep my crazy ass installed 3.73 gears on top of F1X and Nitrous lol. I love it my first drive was lastnight!!!

WTF you are nuts lol! That must be some quick gear rowin. Can't wait for some video! You dyno it yet?

[Terry504]

24844
24845

Feels great I love it no Dyno yet sorry for wait we have 3 Cars we are doing now my car, Supercharged C7, and Turbo Trans Am. When they are all finished we will Rent a Dyno. Car pulls like crazy though I destroyed the C7 pictured.