PDA

View Full Version : "Parts Help"



St.Char
01-13-2014, 08:52 PM
"03 SRT. I am looking for the seal washers for the banjo bolt (there are 2 per bolt, so I need 8) where it attaches to the caliper. I have looked everywhere and no luck. Even checked with Dodge dealer and they don't have a part# and don't stock them. I have searched every parts store in town, no luck. If you have them or know how I can get them, I would greatly appreciate it. These are all I need before putting my calipers back on the car. Thx.

Steve M
01-13-2014, 09:07 PM
You need a 10mm (3/8") copper crush washer. I don't know how they feel about direct links to products around here, so I'll send you a PM.

Sean Roe
01-13-2014, 09:33 PM
Your Dodge parts dealer isn't looking very hard.
Item #4 in the image below, part # 06502114
However, that's also a standard auto parts store item and is 10 mm as Steve called out.
Get the complete parts book for your car by scrolling to your year and downloading the PDF from my page here: http://www.roeracing.com/productcart/pc/Original-Equipment-Parts-d7.htm
We don't make a lot of noise about it, but we've been a direct Dodge and Mopar parts dealer for over 10 years and these are the catalogs we use when not using a VIN on Starparts.

St.Char
01-13-2014, 09:40 PM
Your Dodge parts dealer isn't looking very hard.
Item #4 in the image below, part # 06502114
However, that's also a standard auto parts store item and is 10 mm as Steve called out.
Get the complete parts book for your car by scrolling to your year and downloading the PDF from my page here: http://www.roeracing.com/productcart/pc/Original-Equipment-Parts-d7.htm
We don't make a lot of noise about it, but we've been a direct Dodge and Mopar parts dealer for over 10 years and these are the catalogs we use when not using a VIN on Starparts.

Sean, I really appreciate your help on this. This is great information! Thank you kindly! -Greg

St.Char
01-13-2014, 09:55 PM
Steve, thanks for the quick heads up on these!


You need a 10mm (3/8") copper crush washer. I don't know how they feel about direct links to products around here, so I'll send you a PM.

Brian E
01-14-2014, 04:52 PM
Get the complete parts book for your car by scrolling to your year and downloading the PDF from my page here: http://www.roeracing.com/productcart/pc/Original-Equipment-Parts-d7.htm


Sean thats a great resource. Thank you!

Sean Roe
01-15-2014, 02:23 PM
You're welcome, glad to help!