ACR rub strip part number

[ViperJon]

Searched but didn't find any info. Anyone know a part number for the rub strip by itself? Wouldn't matter regular ACR or ACR-E it's the removable polymer strip replaced by the track extension.

[fuggles]

This site has a catalog. Not easy to navigate. This might be what you are looking for.

http://www.mopar.com/part/68322468AA?s=379229&i=9869300&b=dodge

[ViperJon]

Hmmmm....or is it this part? http://www.mopar.com/part/68322466AA?s=379229&i=10008630
More like it for a little piece of plastic. Terrible website to navigate and find specifics.

[kverges]

It's number 34 on that exploded diagram. Don't get the bigger one without the supports and a willingness to scrape a bit more due to greater overhang

[fuggles]

Good question. Horrible navigation for sure. Why are both "item 42"? With two different part numbers. Strange. I don't know.

[kverges]

I want to say it may be 68050016AB for regular and 68050015AB for extended.

[fuggles]

I believe those parts are for a gen 4.
This site says application is 2008-2010.

http://www.factorychryslerparts.com/products/SKID-STRIP-KIT-Front-Splitter/4415846/68050016AB.html

[Rapidrezults]

68322468aa :rub strip: Front 1/ep 844.00 844.00 844.00

Unfortunately I had to price this strip because a wonderful creature of the planet decided to steal my ACR front splitter bag with the stock (smaller) rub strip inside it.

[ACRucrazy]

That is a retarded price for a plastic rub strip...

[Arizona Vipers]

Is anyone making an aftermarket version yet?

[SSGNRDZ_28]

Is anyone making an aftermarket version yet?

I am currently working on the diffuser strakes and splitter extension for the extreme. I don't have access to the rub strip but when I can get one I'll manufacture it.

[ViperJon]

68322468aa :rub strip: Front 1/ep 844.00 844.00 844.00

Unfortunately I had to price this strip because a wonderful creature of the planet decided to steal my ACR front splitter bag with the stock (smaller) rub strip inside it.

Chris are you sure that's not the bigger track extension (like on a non extreme ACR) versus just the little 2" rub strip?
I know Mopar prices are ridiculous but that's another level of insane.

[mjorgensen]

Good question. Horrible navigation for sure. Why are both "item 42"? With two different part numbers. Strange. I don't know.

If you look at the descriptions under 42 you will see that there are 3 parts, the center and one for each side with the plastic extension so those are the standard ACR splitter strips, yes TOTALY ridiculous prices....

[Rapidrezults]

Chris are you sure that's not the bigger track extension (like on a non extreme ACR) versus just the little 2" rub strip?
I know Mopar prices are ridiculous but that's another level of insane.

Mark priced it for me, I would assume this is very accurate as Mark is rarely wrong. Lol

And yes I specifically asked for the smaller stock rub strip.

[kverges]

I am currently working on the diffuser strakes and splitter extension for the extreme. I don't have access to the rub strip but when I can get one I'll manufacture it.

I have been looking at having a local friend Scan in and make the larger extension locally. I have to think that it can be pretty easily fabricated, because it is flat with just a bunch of holes in it and blind nuts. But if someone else has already done the work, I would be curious. Also, I have been wanting to try an extension with an extra 2 inches to try to get rid of some of the push. That kind of part would probably really be track-only so there might not be very many people willing to try it. Also, shipping has to be costly given the bulkiness of the item .

Anyway, what have you done already and what are your prices? Thanks.

[SSGNRDZ_28]

I have been looking at having a local friend Scan in and make the larger extension locally. I have to think that it can be pretty easily fabricated, because it is flat with just a bunch of holes in it and blind nuts. But if someone else has already done the work, I would be curious. Also, I have been wanting to try an extension with an extra 2 inches to try to get rid of some of the push. That kind of part would probably really be track-only so there might not be very many people willing to try it. Also, shipping has to be costly given the bulkiness of the item .

Anyway, what have you done already and what are your prices? Thanks.

I have laser scanned the parts, drawings are being generated. First things first, OEM reproductions. I have considered different shapes for balance change, etc. and would be willing to have you or other volunteers try one.

Pricing is TBD, I will have it soon, but for sure shipping will be costly, probably $75 or so UPS GND for the splitter or splitter and strakes, less for the diffuser strakes only. I would think it would still be cheaper than scanning and making a low quantity yourself. I will start a thread when I have pricing or check my facebook page for updates.

[kverges]

Thanks; I tend to agree that the OEM duplicates make sense first and no point both of us re-inventing the wheel. I look forward to hearing about pricing and thanks again for the effort.

[ek1]

I have laser scanned the parts, drawings are being generated. First things first, OEM reproductions. I have considered different shapes for balance change, etc. and would be willing to have you or other volunteers try one.

Pricing is TBD, I will have it soon, but for sure shipping will be costly, probably $75 or so UPS GND for the splitter or splitter and strakes, less for the diffuser strakes only. I would think it would still be cheaper than scanning and making a low quantity yourself. I will start a thread when I have pricing or check my facebook page for updates.

Thank you! Please let me know when they are available. Dodge's prices are insulting. If I wanted to pay $844 for a flat piece of recycled plastic, I'd buy a McLaren!

[sadil]

Isnt #42 the entire front splitter? everything before the ACR/ACRE extensions?

[allans]

Thank you! Please let me know when they are available. Dodge's prices are insulting. If I wanted to pay $844 for a flat piece of recycled plastic, I'd buy a McLaren!

McLaren is cheaper, about $650