Stock Gen III dyno?

[06SRTCoupe]

Okay I did a search and looked for everything under the word "dyno" and found nothing. I was just curious what a stock Gen III dynos at. That or something with a CAI only is fine also. Thanks!

This shouldn't matter but, I have an 06 coupe (what gave that away???).

-Brent

[FrgMstr]

If I recall correctly you should see stock dyno numbers on those from 435 to 465 peak RWHP. I don't seem to have any sheets handy. But I am sure some others will chime in here in the next day or so.

[HyperViper]

Depends on the Dyno but probably 430-445

[chicagopd50]

i dynoed on a mustang dyno, with bbk TB , catless exaust, borla catbacks 2.5, K&N filters,sct tune from roe. 460hp 480tq, if you wanna try to convert the number to a dyno jet u need to add like 12-15% on top of what i got. heres the video of dyno, https://www.youtube.com/watch?v=aLd-0Erhw-4 also heres a video of what you can do with good drag radials at the track..try to beat that lol....https://www.youtube.com/watch?v=KslB7Iwehh81518315184

[Mr White]

I'll have one once the snow thaws :stickmen_burningsti

[Rmj]

Wow! Awesome run Mike! Looks a LOT stronger than Dyno numbers indicate......great driver mod!

[No hemi]

Mine did 446/479 all stock , after some mods it did 491/544 but on a mustang dyno this time.

[chicagopd50]

Thanks the dyno guy said that my drag radials were a problem for the dyno so it might have read a lil less.

[Ninjazx71]

https://www.youtube.com/watch?v=KslB7Iwehh8

OK, the beginning of that clip, when you first start to back up is really weirding me out... it looks like your car is breathing or something man... was that actually a Transformer or something doing that run?????

[chicagopd50]

Haha your not the first to ask me that. It was actually the sticky ground making the noise and my friends camera is a higher end camera and caught the actual sound from prepped track on to my tires lol.oh and also i think he switched the mode to HD and it looked like the video or car i should say was folding lol

[aNinjaneer]

I did a stock(ish) Gen 3 about a year ago on a Dynapack. Made 436/453, then sprayed it with a 150 shot and did 577/737! The bearings gave out shortly afterwards, unsurprisingly. :/

As I'm sure you know, comparing dyno numbers between different cars on different dynos at different times/temps/pressures must be taken with a grain of salt. :)