2002 GTS part needed...

[ViperGTS]

"harness canister purge"

A friend of mine is looking for part #3 in the attached picture.
We tried to find one - no luck so far. Seems to be out of stock.

14083We got part #1 delivered...0476 3804 AD - 001 on the label.Does the "001" indicate that it is part 1? If yes, we need part # 0476 3804 AD - 003.

[dave6666]

I'd give you one for free, but then I'd have to deal with all of the forum losers that say I never help people, saying I never help people.

I assume that's the piece that goes between the valve covers up to the back of the air box?

[99RT10]

I assume that's the piece that goes between the valve covers up to the back of the air box?

That looks like it. Dave will hook you up Markus.

[Fatboy 18]

You looking for new or used? What's the problem with the one you have? Has a pipe split or are you trying to return an engine to stock?

Did you ask Chuck Tator? I have a used one as I took mine off my car and set up an oil catch can system.

So you need the assembly that is in the lower part of that picture?

[ViperGTS]

Thanks all! Sent Dave a PM.
@Mark, I don't know about the "underlying problem" - he needs the part. May be broken.

[Fatboy 18]

No problem, was not sure if you needed something shipping to Europe as it would have been faster from my end :)

[ViperGTS]

I'd give you one for free, but then I'd have to deal with all of the forum losers that say I never help people, saying I never help people.
I assume that's the piece that goes between the valve covers up to the back of the air box?

My friend says the part is located between the engine and the cockpit...rear of the engine

[Phunny]

I'd give you one for free, but then I'd have to deal with all of the forum losers that say I never help people, saying I never help people.

I assume that's the piece that goes between the valve covers up to the back of the air box?

Dave's a loser and never helps people.




:)

[Sybil TF]

Dave's a loser and never helps people. Except his nut swingers, then he will...




Fixed

[Fatboy 18]

My friend says the part is located between the engine and the cockpit...rear of the engine

? that makes no sense? All the pipes displayed in your parts diagram are at the front of the engine!

[ViperGTS]

I'll have a look under the hood of a 2002 tomorrow to check myself :United_Kingdom:

[Fatboy 18]

I'll have a look under the hood of a 2002 tomorrow to check myself :United_Kingdom:

OK, Here is a picture of parts No1 and No2 on your diagram (I removed my oem parts and replaced them with braided hoses)

https://farm4.staticflickr.com/3857/15299507615_ce7ca884ed_c.jpg These are on the front of the engine ;)

The 3rd part connects the oil breather pipe to the front of the valve covers and then goes into the stock airbox.

Rear of the engine is where the twin coil packs are located. slightly right of the coil packs is a rear coolant hose which connects to the black steel pipes bolted to the side of the engine below the valve covers.

So not sure which part your friend is after?

[ViperGTS]

Thanks Mark! I am on "island time"...will soon check myself ...haven't heard from Dave. May come back to you!

[ViperGTS]

It is on the front of the engine! Checked myself today. Sorry for the confusion but there is 3 languages involved between my friend, me and the www.
Mark, you still have one? I can send you the address (in France).
Have not heard from Dave.

[Fatboy 18]

It is on the front of the engine! Checked myself today. Sorry for the confusion but there is 3 languages involved between my friend, me and the www.
Mark, you still have one? I can send you the address (in France).
Have not heard from Dave.

Drop me a PM with address and I will see what I can do :)

[ViperGTS]

Thx. PM sent.

[SSSWEET]

Did you ever get the hose assembly you needed? If so, please advise as to source- I need the same one!

Dodge dealership ordered one for me, as per their parts diagram. What was received was section #2 instead of #3. Never have been able to get my hands on the correct one (#3).

[Fatboy 18]

I have dug mine out from the back of the garage but the corrugated plastic flexi hose has holes in it :(

I will send it on (if you wish), but am not sure if this is why you needed a replacement in the first place? The two right angled rubber valve fittings are in good shape as is the long stiff plastic tube.

Currently trying to find a suitable box to send it in! ;)

[flyingskibiker]

Try dodgepartscheap.com PN 4763 804. Or this: http://www.moparpartsoverstock.com/p/__/HARNESS-Canister-Purge/6689525/04763804AD.html.

[ViperGTS]

Thanks Mark! I will tell Marc and ask him to send back the part(s) if there is a problem on his side. OK?

[ViperGTS]

Thanks "ski" for the link.