Fog lights with high beams Gen 2

[Black Moon]

Has anyone ever figured out how to have the foglights stay on with the high beams on a GEN 3? I searched the other sites over the years and never found a solution. Lows and highs on together would also be helpful. Thanks, Sal

[swolff]

I believe that its a regulation in most states if not federal that fog lights must shut off when high beams are being used.

[steve911]

It would sure be nice though..

[Black Moon]

I really could care less what the regulations are but thanks for the info.


I believe that its a regulation in most states if not federal that fog lights must shut off when high beams are being used.

[swolff]

I really could care less what the regulations are but thanks for the info.

I'm sure there is a way to wire it or jump the relays to have the fogs run if the switch is on regardless of high beam use. I suck with electronics and can't be of anymore help :(

Only reason I brought up the regulation is if your state has inspections they could potentially fail you. But hey, my state says I can't have window tint, headers etc but that didn't stop me

[Black Moon]

I'll trace the connectors at the relays. I'm sure wire and a diode will do the job. I just need a bit more electrical expertise.